+7 (812) 645-08-06
Thermal mass flow meters and flow controllers
select brand
Thermal mass flow meter / for gas - IP67 | ST75 series
The ST75 is a direct mass flow measurement and monitoring solution for air, fuel gases, compressed air, inert and other gas flows that are present within industrial processes. It offers accurate readings and there are no moving parts. The device is available in nine different...
Thermal mass flow meter / for gas - IP67 | ST75 series
The ST75 is a direct mass flow measurement and monitoring solution for air, fuel gases, compressed air, inert and other gas flows that are present within industrial processes. It offers accurate readings and there are no moving parts. The device is available in nine different sizes. It can be used for direct in-line installation in line sizes from 1/4 to 2 inch [6 to 51mm]. The unit combines precision lithography structured platinum RTD sensors that are embedded in FCI's equal mass thermowells. This along with microprocessor electronics and a precise actual gas calibration will provide top notch performance.
The device can eliminate the need to bring additional sensors on to the scene. These might be required by infrared technologies for measurements of direct mass flow. It uses thermal dispersion technology for this purpose. The instrument can be used for measuring a wide range of flows from low to high using its 100:1 turndown and flow ranges from 0.01 to 559 SCFM [0.01 to 950 NCMH] features. It can be specially calibrated for working with most of the gases.
The device can eliminate the need to bring additional sensors on to the scene. These might be required by infrared technologies for measurements of direct mass flow. It uses thermal dispersion technology for this purpose. The instrument can be used for measuring a wide range of flows from low to high using its 100:1 turndown and flow ranges from 0.01 to 559 SCFM [0.01 to 950 NCMH] features. It can be specially calibrated for working with most of the gases.
Thermal mass flow meter / for gas / direct reading - ST75 series
The ST75 gas mass flow meter built with no moving parts is used for accurate direct mass flow measurement. It also offers a monitoring solution for fuel gases, air, compressed air, inert and other gas flows within industrial processes. The device is available...
Thermal mass flow meter / for gas / direct reading - ST75 series
The ST75 gas mass flow meter built with no moving parts is used for accurate direct mass flow measurement. It also offers a monitoring solution for fuel gases, air, compressed air, inert and other gas flows within industrial processes. The device is available in nine different sizes for direct, in-line flexible installation in line sizes from 1/4 to 2 inch [ 6 to 51mm].
ST75 features precision lithography structured platinum RTD sensors embedded in FCI's equal mass thermowells combined with microprocessor electronics and precise actual gas calibration to outstanding flow measurement performance. ST75's direct mass flow measurement is designed based on FCI's proven thermal dispersion technology, thus significantly eliminates the space and expenses of any additional sensors required by inferred technologies. The module with its 100:1 turn down and flow ranges from 0.01 to 559 SCFM [0.01 to 950 NCMH], offers wide flow range, from low to high flow conditions.
ST75 features precision lithography structured platinum RTD sensors embedded in FCI's equal mass thermowells combined with microprocessor electronics and precise actual gas calibration to outstanding flow measurement performance. ST75's direct mass flow measurement is designed based on FCI's proven thermal dispersion technology, thus significantly eliminates the space and expenses of any additional sensors required by inferred technologies. The module with its 100:1 turn down and flow ranges from 0.01 to 559 SCFM [0.01 to 950 NCMH], offers wide flow range, from low to high flow conditions.
Thermal mass flow meter / for gas / insertion - 0.75 - 400 sfps | ST50 series
The ST50 Flow Meter is especially designed to provide a good quality performance and functionality. It has a precise and easy-to-install functioality...
Thermal mass flow meter / for gas / insertion - 0.75 - 400 sfps | ST50 series
The ST50 Flow Meter is especially designed to provide a good quality performance and functionality. It has a precise and easy-to-install functioality with no moving parts solution mainly for measuring and controlling air. The ST50 uses the FCI proven thermal technology system to give a direct mass flow measurement which results to higher rate of performance at a lower cost compared to the orifice plates, DP, Vortex shedding and other thermal devices. The meter installs in line sizes which ranges from 2 to 24 inches [51 to 610mm] with 1/2" or 3/4" NPT.
Thermal mass flow meter / for gas / insertion - ST98 series
The ST98 series is manufactured by Fluid Components International LLC. It is an insertion thermal mass flow meter for virtually...
Thermal mass flow meter / for gas / insertion - ST98 series
The ST98 series is manufactured by Fluid Components International LLC. It is an insertion thermal mass flow meter for virtually any gas or gas mixture in line sizes from >2 inches up to 42 inches [5 0mm to 1066 mm].
Features of the ST98 series include direct mass flow measuring, integral and remote electronic versions, and all welded wetted components. It has no movable components, the parts are robust in all metal enclosures. The flow range is 0.75 to 600 sfps [0.21 to 172 nmps].
Features of the ST98 series include direct mass flow measuring, integral and remote electronic versions, and all welded wetted components. It has no movable components, the parts are robust in all metal enclosures. The flow range is 0.75 to 600 sfps [0.21 to 172 nmps].
Thermal mass flow meter / for gas / insertion - NEMA4X IP67 | ST50 series
The ST50 Series is composed of flow meters that work accurately and install easily with immovable components. The meters provide measurement of biogas, digester gas, methane and natural gas....
Thermal mass flow meter / for gas / insertion - NEMA4X IP67 | ST50 series
The ST50 Series is composed of flow meters that work accurately and install easily with immovable components. The meters provide measurement of biogas, digester gas, methane and natural gas. They are using the FCI-proven thermal dispersion technology to allow direct measuring of mass flow. In contrast with orifice plates, DP, Vortex shedding and other similar equipment, this series less costly while performing highly. The meters can have installations with its broad line size selection which ranges from 2" ~ 4" or 51 mm ~ 610 mm with 1/2 inch or 3/4 inch NPT. In combination with microprocessor electronics and precision calibration, the ST50 is capable of achieving highly accurate, quick responding and almost maintenance-free operation.
Thermal mass flow meter - MFM 2020
The MFM 2020 is a compact mass flow meter that is equipped with digital interface and...
Thermal mass flow meter - MFM 2020
The MFM 2020 is a compact mass flow meter that is equipped with digital interface and 0-5 V analog output. It is small-sized to cater applications wherein space is limited. Furthermore, it can be used in building custom made multichannel gas metering units. Temperature, meter state and identity information are provided by the MFM 2020.
Thermal mass flow meter - MFM 2021
The MFM 2021 is a thermal mass flow meter that is equipped with extra highly precise PID...
Thermal mass flow meter - MFM 2021
The MFM 2021 is a thermal mass flow meter that is equipped with extra highly precise PID controller. It also comes with an analog out put to control the gas flows directly, quickly and accurately. Its additional valve override mechanism sets the valve immediately into completely open, moderately open, moderately closed or completely closed positions.
Thermal mass flow controller - MFC 2022
The MCF 2022 Series, manufactured by Axetris®, is a high performance thermal mass flow...
Thermal mass flow controller - MFC 2022
The MCF 2022 Series, manufactured by Axetris®, is a high performance thermal mass flow...
Thermal mass flow meter - MFM 2100 Series
The MFM 2100 is a series of stand-alone mass flow meter from Axetrist. It is housed on an...
Thermal mass flow meter - MFM 2100 Series
The MFM 2100 is a series of stand-alone mass flow meter from Axetrist. It is housed on an enclosure that delivers protection from hazards brought by environmental and electrical factors. It is a suitable alternative to standard mass flow or volume flow meters. This meter has a full scale mass flow and the gas type can be changed using the digital interface.
Thermal mass flow controller - MFC 2100 Series
The MFC 2100 Series by Axetris consists of thermal mass flow controllers equipped...
Thermal mass flow controller - MFC 2100 Series
The MFC 2100 Series by Axetris consists of thermal mass flow controllers equipped with fast acting solenoid valve. They are more compact compared to standard mass flow controllers. Also, they operate with increased precision and decreased set up time. The MFC 2100 Series is manufactured with various ranges of gas capacity.
Thermal mass flow controller / digital - GF40, GF80 series
The GF40 and GF80 series of thermal mass flow controllers and meters is designed for solar film deposition,...
Thermal mass flow controller / digital - GF40, GF80 series
The GF40 and GF80 series of thermal mass flow controllers and meters is designed for solar film deposition,...
Thermal mass flow meter / for gas - min. 3 sccm, max. 2500 slpm
The SLA5800 controllers and meters are engineered by the mass flow experts at Brooks Instrument to provide a configurable platform...
Thermal mass flow meter / for gas - min. 3 sccm, max. 2500 slpm
The SLA5800 controllers and meters are engineered by the mass flow experts at Brooks Instrument to provide a configurable platform that is trusted to deliver processes for a broad range of applications, operating temperatures and pressures. With better zero drift specifications compared to competitive products, SLA5800 MFCs maintain factory calibration and accuracy longer. This zero stability specification is made possible by thermal flow measurement sensor designs.
Thermal mass flow meter / digital - min. 3 sccm, max. 30 slm | GF series
This is the GF125 High Accuracy ( HA ) which is a high performance gas and range specific model. It is for critical gas process applications which need the largest range of working yet a tight flow of accurate controlling. Typical application is multi-step processes...
Thermal mass flow meter / digital - min. 3 sccm, max. 30 slm | GF series
This is the GF125 High Accuracy ( HA ) which is a high performance gas and range specific model. It is for critical gas process applications which need the largest range of working yet a tight flow of accurate controlling. Typical application is multi-step processes needing a high flow rate ( up to 10 slpm ) and a highly accurate low flow rate. This was done by using two mass flow controllers traditionally, but now with the help of GF125 ( HA ) superior low setpoint accuracy these two mass flow controllers have been replaced with one single controller which enables it to be cost effective as well as frees up a gas line for greater gas panel flexibility. This GF125 is a second generation multi-variable, pressure transient insensitive mass flow controller which has been built on the Brooks' leadership position in pressure transient insensitive ( PTI ) mass flow controller technology. This has reduced the process gas flow variation because of pressure as well as temperature changes. The GF125 enables customers to simplify and reduce . . . .
Thermal mass flow controller / digital - min. 3 sccm, max. 50 slpm | SLA 7950, 7960
TMF-SLA7950Brooks Model SLA7900 Series UHP digital thermal mass flow measurement and control products provide incomparable...
Thermal mass flow controller / digital - min. 3 sccm, max. 50 slpm | SLA 7950, 7960
TMF-SLA7950Brooks Model SLA7900 Series UHP digital thermal mass flow measurement and control products provide incomparable flexibility and performance. They are developed to match the latest 1-1/8” platform. The SL7900 Series utilizes the high accuracy of the TruCal process gas calibration system and Brooks’ proprietary control algorithm. Brook’s advanced metal seal valve that is resistant to process changes offers better control.
Thermal mass flow controller / for gas - max. 40 slpm | 4800 series
The 4800 Series flow meters feature a broad flow range, compact size and MEMS-based sensor that provides lightning-fast response times. Brooks thermal mass flow controllers and mass...
Thermal mass flow controller / for gas - max. 40 slpm | 4800 series
The 4800 Series flow meters feature a broad flow range, compact size and MEMS-based sensor that provides lightning-fast response times. Brooks thermal mass flow controllers and mass flow meters also have many certifications and approvals for ingress protection and use in hazardous areas. Plus, your products are backed by the industry's best trained and most responsive flow experts with application experience in virtually every industry, all over the world. It is Newly enhanced with upgraded electronics, improved accuracy for tighter process control and improved service port access, the SLA5800 series has delivered reliable, repeatable, precise performance in thousands of applications across a wide range of industries.