+7 (812) 645-08-06
Surge protection devices: type 3 surge arresters
select brand
Multi-pole surge arrester / type 3 / wall-mount - 255 - 440 V, 30 - 40 kA | ATCOMPACT 3 series
Current : 30 A - 40 A
Voltage : 255 V - 440 V
ATCOMPACT protection boxes are made of several kind of SPD aiming the protection of all lines out from single-phase SPD, including the protective fuses against short circuits....
Voltage : 255 V - 440 V
ATCOMPACT protection boxes are made of several kind of SPD aiming the protection of all lines out from single-phase SPD, including the protective fuses against short circuits....
Multi-pole surge arrester / type 3 / wall-mount - 255 - 440 V, 30 - 40 kA | ATCOMPACT 3 series
Current : 30 A - 40 A
Voltage : 255 V - 440 V
ATCOMPACT protection boxes are made of several kind of SPD aiming the protection of all lines out from single-phase SPD, including the protective fuses against short circuits....
Voltage : 255 V - 440 V
ATCOMPACT protection boxes are made of several kind of SPD aiming the protection of all lines out from single-phase SPD, including the protective fuses against short circuits....
Transient voltage and lightning protection surge arrester / type 3 / DIN rail / for power supplies - 30 kA, 255 - 440 V | ATCOVER series
Current : 30000 A
Voltage : 255 V - 440 V
This product offers efficient protection against transient overvoltages for TNS and TT electrical supply lines in only one device. Low and medium internal co-ordination protection stages are recommended in the Regulation of Low Voltages (REBT ITC23).According to regulations...
Voltage : 255 V - 440 V
This product offers efficient protection against transient overvoltages for TNS and TT electrical supply lines in only one device. Low and medium internal co-ordination protection stages are recommended in the Regulation of Low Voltages (REBT ITC23).According to regulations...
Transient voltage and lightning protection surge arrester / type 3 / DIN rail / for power supplies - 30 kA, 255 - 440 V | ATCOVER series
This product offers efficient protection against transient overvoltages for TNS and TT electrical supply lines in only one device. Low and medium internal co-ordination protection stages are recommended in the Regulation of Low Voltages (REBT ITC23).According to regulations EN 61643- 11 and GUIDE-BT-23 from REBT the type 1 and type 2 are tested and certified. It is suitable for categories I, II, III and IV equipments in accordance with ITC-BT-23 from REBT. The discharge takes place in an encapsulated element which has no external flash. In normal conditions it remains inactive and the normal working of the line remains undisturbed and without any sort of leakage. It can be co-ordinated with other SPDs like ATSHOCK, ATSUB and ATSHIELD series. Common and differential protection is offered for the three lines and also for neutral. Because there is no interruptions in power supply, there are no situations of lost data that may cause inconvenience to the user. The residual voltage is kept low. Through a lightning indicator of failure, a double warning for "no protection" is offered.
Three-phase surge arrester / type 3 / DIN rail - 30 kA, 255 - 440 V | ATCOVER TNC series
Current : 30000 A
Voltage : 255 V - 440 V
The Atcover TNC Series, manufactured by Aplicaciones, is a power supply lines surge arrester...
Voltage : 255 V - 440 V
The Atcover TNC Series, manufactured by Aplicaciones, is a power supply lines surge arrester...
Three-phase surge arrester / type 3 / DIN rail - 30 kA, 255 - 440 V | ATCOVER TNC series
The Atcover TNC Series, manufactured by Aplicaciones, is a power supply lines surge arrester that is suitable for low voltage, heavy duty riser pole underground and overhead applications. It has various internal management protection, peak current of 30kA, maximum voltage of 255V and protection level of 700V. This provides an overvoltage system protection.
Single-phase surge arrester / type 3 / DIN rail / for power supplies - 30 kA, 145 - 255 V | ATCOVER M series
Current : 30000 A
Voltage : 145 V - 255 V
The Atcover M series engineered by Aplicaciones Tecnológicas, is a single-phase surge arrester that features...
Voltage : 145 V - 255 V
The Atcover M series engineered by Aplicaciones Tecnológicas, is a single-phase surge arrester that features...
Single-phase surge arrester / type 3 / DIN rail / for power supplies - 30 kA, 145 - 255 V | ATCOVER M series
Current : 30000 A
Voltage : 145 V - 255 V
The Atcover M series engineered by Aplicaciones Tecnológicas, is a single-phase surge arrester that features...
Voltage : 145 V - 255 V
The Atcover M series engineered by Aplicaciones Tecnológicas, is a single-phase surge arrester that features...
DC surge arrester / type 3 / DIN rail - 10 kA, 7 - 132 V | ATVOLT series
Current : 10000 A
Voltage : 7 V - 96 V
The ATVOLT power supply lines surge protection is used to safeguard DC supply lines,...
Voltage : 7 V - 96 V
The ATVOLT power supply lines surge protection is used to safeguard DC supply lines,...
DC surge arrester / type 3 / DIN rail - 10 kA, 7 - 132 V | ATVOLT series
The ATVOLT power supply lines surge protection is used to safeguard DC supply lines, particularly for one pair of supply lines at a time. The device is constructed to suit I, II and III categories, and is in compliance with ITC-BT-23 from REBT. Also, it is assessed based on EN 61643-11 and GUIDE-BT-23 standards.
Single-phase surge arrester / type 3 - CSF series
The CSF represents the range of combined devices, which are used for discharging induced transient over-voltages of Type 2/Class II. They are also used to...
Single-phase surge arrester / type 3 - CSF series
The CSF represents the range of combined devices, which are used for discharging induced transient over-voltages of Type 2/Class II. They are also used to the protection of sensitive equipment of Type 3/Class III in compliance with the IEC 61643-1.
The device is ideal for use in limited spaces. The maximum discharge current is 20 kA, with an 8/20 ?s waveform, and it has a voltage pulse of 6kV with 1.2/50 ?s waveform. The device occupies a single module and works in single phase 230 V networks. There is a provision for remote and visual indication of the life status of the protection device.
The device is ideal for use in limited spaces. The maximum discharge current is 20 kA, with an 8/20 ?s waveform, and it has a voltage pulse of 6kV with 1.2/50 ?s waveform. The device occupies a single module and works in single phase 230 V networks. There is a provision for remote and visual indication of the life status of the protection device.
Single-phase surge arrester / type 3 - 120 - 230 V | DM2
The CPT surge protection devices of the DM2 series are used for discharge of induced transient over voltage (Type 2 / Class II) and, according to IEC 61643-1, offer protection for highly sensitive equipment (Type...
Single-phase surge arrester / type 3 - 120 - 230 V | DM2
The CPT surge protection devices of the DM2 series are used for discharge of induced transient over voltage (Type 2 / Class II) and, according to IEC 61643-1, offer protection for highly sensitive equipment (Type 3 / Class III). They have an integrated EMI filter filter, and are meant for DIN rail mounting, featuring a monoblock design. They are commonly used as final stage protections, in systems with serious electromagnetic interruptions and discharges. They contain series connection for applications up to 20 A, with 82 dB filter attenuation, with maximum discharge current up to 20 kA (8/20 μs waveform), a 6 kV voltage pulse, with a 1.2/50 μs waveform, and are mostly used for single-phase 120 V and 230 V networks. They contain visual indicators of the current durability status, offering information in case of replacement need.
Type 3 surge arrester / plug-in - PSL series
The PSL features a surge protection device with type 3 or class III, for well resistance of sensitive facility according with IEC61643-1. This...
Type 3 surge arrester / plug-in - PSL series
The PSL features a surge protection device with type 3 or class III, for well resistance of sensitive facility according with IEC61643-1. This device is applicable to the final level of resistance in installations which consist type 2 surge protection tools installed upstream. The residual voltage of the tool is lesser compared to that of type 1 or 2 protectors. In addition, this tool can operate with a nominal voltage of 120/208V, 230/400V and 277/480V single-phase networks. It is also has a remote and visual indication of life status of the protection tool.
Transient voltage and lightning protection surge arrester / type 3 - 8 kA | DM1
The DMI series is a range of devices designed to deliver efficient performances in protecting susceptible equipment from power surges. They are compliant with IEC 61643-1 guidelines. They are Type 3, Class III devices, equipped with an integrated EMI...
Transient voltage and lightning protection surge arrester / type 3 - 8 kA | DM1
The DMI series is a range of devices designed to deliver efficient performances in protecting susceptible equipment from power surges. They are compliant with IEC 61643-1 guidelines. They are Type 3, Class III devices, equipped with an integrated EMI filter. The devices are structured to confirm to DIN rail monobloc criteria. The devices are conducive to installation in panels that equipped with Type 2 surge protection units, installed in the upstream. When installed in such applications, they act as the final protective barrier against power surges. They can be installed in systems with electromagnetic interference to prevent the interruption, degradation or restriction of performance.
Devices have lower residual voltages as compared to Type 1/Type 2 devices, thus ensuring better protection capabilities. For optimum performance, they should be positioned very close to the equipment requiring protection. They have a rated current of 8A and voltage pulse of 1.2/50μs.
Devices have lower residual voltages as compared to Type 1/Type 2 devices, thus ensuring better protection capabilities. For optimum performance, they should be positioned very close to the equipment requiring protection. They have a rated current of 8A and voltage pulse of 1.2/50μs.
Transient voltage and lightning protection surge arrester / type 3 - 12 - 230 V | RD series
The RD is a coverage of surge protection devices with type 3 or class III, for well resistance of sensitive facility with accordance of IEC 61643-1....
Transient voltage and lightning protection surge arrester / type 3 - 12 - 230 V | RD series
The RD is a coverage of surge protection devices with type 3 or class III, for well resistance of sensitive facility with accordance of IEC 61643-1. This device is applicable as the final level of resistance in installations which consist of type 2 surge protection tools installed upstream. The residual voltage of these tools is lesser compared that of type 1 or 2 protectors. This tool can operate with nominal voltage ratings of 230 V, 120 V, 60 V, 48 V, 24 V, 12 V for single-phase networks. It is also available in LED and status indication of life of protection tool.
Type 3 surge arrester / DIN rail - ETITEC D series
The ETITEC D series unit is a surge arrester primarily used for interior purposes. The ETITEC D series Group D surge safety is as per the norms of VDE category...
Type 3 surge arrester / DIN rail - ETITEC D series
The ETITEC D series unit is a surge arrester primarily used for interior purposes. The ETITEC D series Group D surge safety is as per the norms of VDE category D and this safety compliments to IEC class III.
The ETITEC D series unit must be set up instantly prior to the protected load. This is to protect it from indirect thunder hits. If at all there is a constant arrester loss, thermal safety of the unit is triggered, that indicates the damaged arrester. In such cases where arrester has been damaged, you'll need to to change the varistor overvoltage insert. The basic cover stays on the top hat fitting DIN rail.
The ETITEC D series unit must be set up instantly prior to the protected load. This is to protect it from indirect thunder hits. If at all there is a constant arrester loss, thermal safety of the unit is triggered, that indicates the damaged arrester. In such cases where arrester has been damaged, you'll need to to change the varistor overvoltage insert. The basic cover stays on the top hat fitting DIN rail.