+7 (812) 645-08-06
DC drives
select brand
Low-voltage DC drive - 16 A
The low voltage PWM DC from Bison comes with chassis drives that regulates the remote commands, a power LED, and adjustments to the trimmer part...
Low-voltage DC drive - 16 A
The low voltage PWM DC from Bison comes with chassis drives that regulates the remote commands, a power LED, and adjustments to the trimmer part for optimum IR comp, current limit, speed and acceleration. The trimmer pots are non-contact, making calibration fast and user-friendly.
The PWM DC can handle an input voltage of 10 to 32 VDC and an output voltage of 95% of its initial input voltage. The PWM DC is equipped with a spade and screw terminal block that is easy to configure. Using the inhibit circuitry, the user can bring the motor to a stopping mode (N.O).
The PWM DC can handle an input voltage of 10 to 32 VDC and an output voltage of 95% of its initial input voltage. The PWM DC is equipped with a spade and screw terminal block that is easy to configure. Using the inhibit circuitry, the user can bring the motor to a stopping mode (N.O).
PWM DC drive - 2 - 5 A, 0 - 240 VDC
Bison's PWM DC Chassis is a filtered pulse-width-modulated variable speed DC drive that provides nearly pure DC power for brush type motors, with the...
PWM DC drive - 2 - 5 A, 0 - 240 VDC
Bison's PWM DC Chassis is a filtered pulse-width-modulated variable speed DC drive that provides nearly pure DC power for brush type motors, with the same footmount as the SCR controls. With a high switching frequency of 16.5kHz, the motor features a 1% regulation over 100:1 speed range. Its user-adjustable calibration pots (IP compensation, min-max speed, current limit, acceleration and deceleration) are complemented by LEDs for power and current limits status for diagnostic monitoring. Installation time is also reduced with its cage clamp terminal block for rapid and simple wire terminations.
PWM DC drive - 0 - 240 VDC
The PWM DC is manufactured with Bison’s SCR speed controls that work on dual voltage and have the ability to control speed or torque. Additionally, it contains...
PWM DC drive - 0 - 240 VDC
The PWM DC is manufactured with Bison’s SCR speed controls that work on dual voltage and have the ability to control speed or torque. Additionally, it contains an external potentiometer that provides the reference for torque, an on-board pot that provides the highest speed, and an on-board Max Speed pot that sets the highest torque.
Its key features include an accel/decel that ranges from 0.5 to 17 seconds, calibration pots that can be easily modified by the users, inhibit functionality that can be adjusted through the jumper pins, spade terminals for the chassis, and screw terminals for the enclosed units.
Its key features include an accel/decel that ranges from 0.5 to 17 seconds, calibration pots that can be easily modified by the users, inhibit functionality that can be adjusted through the jumper pins, spade terminals for the chassis, and screw terminals for the enclosed units.
PWM DC drive - 3 - 10 A, 0 - 180 VDC
The Regen drive series from Bison consists of four-quadrant and full-wave regenerative SCR controls to enable braking torque and seamless motoring for DC motors with brush-type technology. There are a number of calibration pots that can be...
PWM DC drive - 3 - 10 A, 0 - 180 VDC
The Regen drive series from Bison consists of four-quadrant and full-wave regenerative SCR controls to enable braking torque and seamless motoring for DC motors with brush-type technology. There are a number of calibration pots that can be adjusted by the operator: forward torque, reverse acceleration, deadband, minimum and maximum speed, etc.
The series has the ability to control motors from 1/20 – 1HP for bi-directional or single directional variable speed without the use of contactors. Speed range and regulation options include 1% regulation over a speed range of 1% over 50:1 or 1% over 60:1 with a tachometer for feedback. Stopping modes allow the operator to decelerate (NO), coast the motor to a stopping position (NO), or brake (NO).
Additional features include dual-voltage AC input, cage clamp terminal block, fast and simple wire termination and switchable selectable tachometer feedback mode or armature mode.
The series has the ability to control motors from 1/20 – 1HP for bi-directional or single directional variable speed without the use of contactors. Speed range and regulation options include 1% regulation over a speed range of 1% over 50:1 or 1% over 60:1 with a tachometer for feedback. Stopping modes allow the operator to decelerate (NO), coast the motor to a stopping position (NO), or brake (NO).
Additional features include dual-voltage AC input, cage clamp terminal block, fast and simple wire termination and switchable selectable tachometer feedback mode or armature mode.
PWM DC drive - 1.5 - 10 A, 0 - 180 VDC
Bison’s SCR speed controls are dual voltage drives useful for controlling speed or torque. Upon selection of torque mode, there is a change in the functions of the speed and torque pots.
The torque reference is set by the external potentiometer, the highest speed...
The torque reference is set by the external potentiometer, the highest speed...
PWM DC drive - 1.5 - 10 A, 0 - 180 VDC
Bison’s SCR speed controls are dual voltage drives useful for controlling speed or torque. Upon selection of torque mode, there is a change in the functions of the speed and torque pots.
The torque reference is set by the external potentiometer, the highest speed is set by the on-board torque pot, and the maximum torque is set by the on-board Max Speed pot. The acceleration and deceleration time rang is between 0.5 to 17 seconds. The calibration pots can be adjusted by the user for IR compensation, minimum speed, maximum speed, torque, acceleration and deceleration. Power and current limit status is displayed on a LED.
In terms of topping modes, option is available for coasting to minimum speed or stopping with N.O. or N.C. inhibit contacts, which can be selected. The pot circuit can be used for deceleration to minimum speed. Enclosed reversing models include braking.
The chassis features user-friendly spade terminals and the enclosed units have screw terminals. The inhibit is highly flexible with an option to select the desirable functionality with jumper pins.
The torque reference is set by the external potentiometer, the highest speed is set by the on-board torque pot, and the maximum torque is set by the on-board Max Speed pot. The acceleration and deceleration time rang is between 0.5 to 17 seconds. The calibration pots can be adjusted by the user for IR compensation, minimum speed, maximum speed, torque, acceleration and deceleration. Power and current limit status is displayed on a LED.
In terms of topping modes, option is available for coasting to minimum speed or stopping with N.O. or N.C. inhibit contacts, which can be selected. The pot circuit can be used for deceleration to minimum speed. Enclosed reversing models include braking.
The chassis features user-friendly spade terminals and the enclosed units have screw terminals. The inhibit is highly flexible with an option to select the desirable functionality with jumper pins.
Digital DC drive - 0.5 - 1 044 kW, 4.1 - 1688 A | PowerFlex® 20P
Power : min 1.2 kW
Intensity : 4 A - 1688 A
PowerFlex Digital DC drive administers fast, broad diagnostics and easy integration into larger...
Intensity : 4 A - 1688 A
PowerFlex Digital DC drive administers fast, broad diagnostics and easy integration into larger...
Digital DC drive - 0.5 - 1 044 kW, 4.1 - 1688 A | PowerFlex® 20P
PowerFlex Digital DC drive administers fast, broad diagnostics and easy integration into larger drive systems. These cost-effective drives are well suited to a variety of applications including ejecting, finishing, drawing, coating processes and applications exhibiting shock loads. They contribute an interface that is compatible with all PowerFlex DPI communication products.
DC drive - 18 - 19 600 A | DCS800-A
This is an ABB industrial drive that is mounted with a full enclosure. The converter range will supply power to DC machines. It is flexible enough to be customized for more functions.
Six...
Six...
DC drive - 18 - 19 600 A | DCS800-A
This is an ABB industrial drive that is mounted with a full enclosure. The converter range will supply power to DC machines. It is flexible enough to be customized for more functions.
Six and 12 pulse models are available as well as two and four quadrant options. These have ranges of 18 to 9,800/19,600A and a supply voltage of 230...00 Vac. The drive control keeps the unit from using too much power. It also meets all application requirements.
The busbar design is for group drives and uses supports for more air circuit breakers or insulation switches. The cubicles use many I/O solutions with ABB controls. The unit supports the ABS, DNV and Loyd standards. Power cable entry ports may also be adjusted as necessary.
Six and 12 pulse models are available as well as two and four quadrant options. These have ranges of 18 to 9,800/19,600A and a supply voltage of 230...00 Vac. The drive control keeps the unit from using too much power. It also meets all application requirements.
The busbar design is for group drives and uses supports for more air circuit breakers or insulation switches. The cubicles use many I/O solutions with ABB controls. The unit supports the ABS, DNV and Loyd standards. Power cable entry ports may also be adjusted as necessary.
DC drive - max. 450 A | DCS800-E
These ABB retrofit solutions are intended to provide simple and easy modernization of the existing DC drives such as ABB's Tyrak, Veritron and Sele as well as DC drives from other manufacturers. These solutions...
DC drive - max. 450 A | DCS800-E
These ABB retrofit solutions are intended to provide simple and easy modernization of the existing DC drives such as ABB's Tyrak, Veritron and Sele as well as DC drives from other manufacturers. These solutions include three different options. The DCS800-E Panel Solution represents a simple and user-friendly upgrade option for old DC-Drives up to 450 A. It is very easy to install as it comes with pre-mounted, fully wired and tested components and offers considerable time saving on down-times during retrofits. The DCS800-R Rebuild Kit represents a simple option for the exchange of drive electronic boards while keeping the existing power stack in tact. The final option is the complete DCR package for use with Tyrak 8, Veritron SZAD and similar DC drives. It offers the most cost-effective upgrade solution available.
DC drive - max. 20 000 A | DCS800-S0x
ABB's DCS800-S0x is a line of compact and efficient power converter modules that has the innate capacity to support all five of the available IEC61131 languages. These...
DC drive - max. 20 000 A | DCS800-S0x
ABB's DCS800-S0x is a line of compact and efficient power converter modules that has the innate capacity to support all five of the available IEC61131 languages. These powerful high-performance converter modules 12plus hard parallel, serial and sequential designs that allow these devices to process a 5,200 A in single modules, 1,500 VDC in DC voltage, and 1,200 V in AC voltage. With this processing capacity as well as a fully integrated field supply, peer-to-peer communication feature, ethernet remote controlled function, pre-configured functions, and a variety of other available options, allow these instruments to be used for a variety of applications.
DC drive - 20 - 1 000 A | DCS550
ABB DCS550 is an excellent drive solution for the OEM machine production market. This applies to new installations as well as an alternative to older analog devices. The Integrated winder and a wide range of different interfaces provide machine producers with greater flexibility in machine integration. The notable aspects of ABB DCS550 is its relatively...
DC drive - 20 - 1 000 A | DCS550
ABB DCS550 is an excellent drive solution for the OEM machine production market. This applies to new installations as well as an alternative to older analog devices. The Integrated winder and a wide range of different interfaces provide machine producers with greater flexibility in machine integration. The notable aspects of ABB DCS550 is its relatively small footprint for installation in small spaces. There is also an onsite three phase field exciter up to 32 A to fit all available motors.
The Winder is complete with a commissioning assistant, which makes this device compatible with a wide range of applications. Additionally, there are several different field interfaces to include Profinet and EtherCat. These offers easy integration into automation and the PID controller is great for overriding control functions such as pressure or level control. With the adaptive programming and Drive AP, the graphical tool of ABB DCS550 allows easy implementation of several other functions. For fast commissioning, there are a plethora of auto tune functions and start up assistants and the large and clear control interface renders self explanatory and straight forward operation. The rugged design of these products makes them perfectly suited for all types of environments and provide class leading reliability. Worldwide local service for this product line is available in more than 60 countries.
The Winder is complete with a commissioning assistant, which makes this device compatible with a wide range of applications. Additionally, there are several different field interfaces to include Profinet and EtherCat. These offers easy integration into automation and the PID controller is great for overriding control functions such as pressure or level control. With the adaptive programming and Drive AP, the graphical tool of ABB DCS550 allows easy implementation of several other functions. For fast commissioning, there are a plethora of auto tune functions and start up assistants and the large and clear control interface renders self explanatory and straight forward operation. The rugged design of these products makes them perfectly suited for all types of environments and provide class leading reliability. Worldwide local service for this product line is available in more than 60 countries.