+7 (812) 645-08-06
DC drives
select brand
DC motor speed controller - 10 - 60 VDC, 7 A | RS 200
The RS200 is an electronic controller is a transistor servo-controller that is made for brushed permanent-magnet DC motors. It allows the motor to drive and brake in a single direction achieving the braking...
DC motor speed controller - 10 - 60 VDC, 7 A | RS 200
The RS200 is an electronic controller is a transistor servo-controller that is made for brushed permanent-magnet DC motors. It allows the motor to drive and brake in a single direction achieving the braking effect.
The product is an analogue speed regulator that works on a current-regulation basis. There is a filter involved in the product to guarantee that the controller complies with the EMC standards. The product has a complete electromagnetic secured housing.
The fuse that is included in the product interrupts the main supply whenever the supply is overloaded.
The RS200 requires a single supply voltage. The needed auxiliary voltages, involving the ones for employing exterior materials, are taken from the internal power supply of the electronic servo controller.
The product is an analogue speed regulator that works on a current-regulation basis. There is a filter involved in the product to guarantee that the controller complies with the EMC standards. The product has a complete electromagnetic secured housing.
The fuse that is included in the product interrupts the main supply whenever the supply is overloaded.
The RS200 requires a single supply voltage. The needed auxiliary voltages, involving the ones for employing exterior materials, are taken from the internal power supply of the electronic servo controller.
DC brushless drive / engine / PWM - 12 - 40 VDC, 4 A | BGE 42 attached
Controller BGE 42/BGE3004 has a speed control pulse with modulation (PWM). For setting the speed, there is an integral potentiometer. To provide both start/stop and clockwise/counter-clock-wise functions, two connection leads are used. The BGE 42 is...
DC brushless drive / engine / PWM - 12 - 40 VDC, 4 A | BGE 42 attached
Controller BGE 42/BGE3004 has a speed control pulse with modulation (PWM). For setting the speed, there is an integral potentiometer. To provide both start/stop and clockwise/counter-clock-wise functions, two connection leads are used. The BGE 42 is supplied with a 5th connection lead as an option and can be used to provide external target voltage to set the speed.
The speed of the rotation can be set in a range of 500 RPM to 5000 RPM, by supplying the target voltage in a range of 0...+10 V. Where less smooth rotation is tolerated, lower speeds that are down to ca. 200 RPM are possible. To ensure high operational reliability, it is provided with various protection functions such as - low-voltage cutoff, reverse-polarity protection, over-temperature cutoff, and stall protection. As the motor needs a continuous current of 7.1A, the Electronic Controller BGE 3004 is unsuitable for the BG42 x 30 motor. However, the controller is capable of delivering only 4A current.
The speed of the rotation can be set in a range of 500 RPM to 5000 RPM, by supplying the target voltage in a range of 0...+10 V. Where less smooth rotation is tolerated, lower speeds that are down to ca. 200 RPM are possible. To ensure high operational reliability, it is provided with various protection functions such as - low-voltage cutoff, reverse-polarity protection, over-temperature cutoff, and stall protection. As the motor needs a continuous current of 7.1A, the Electronic Controller BGE 3004 is unsuitable for the BG42 x 30 motor. However, the controller is capable of delivering only 4A current.
DC motor speed controller - 12 - 40 VDC, 4 A | BGE 3004A
Dunkermotoren Ametek Controllers BGE42/ BGE3004 have speed control with pulse width modulation (PWM). The speed is set using an essential potentiometer. 2 connection leads can be used to supply a a clockwise/counter-clockwise...
DC motor speed controller - 12 - 40 VDC, 4 A | BGE 3004A
Dunkermotoren Ametek Controllers BGE42/ BGE3004 have speed control with pulse width modulation (PWM). The speed is set using an essential potentiometer. 2 connection leads can be used to supply a a clockwise/counter-clockwise and a start/stop function. The BGE 42 has an optional fifth connection lead that can supply an external target voltage for setting the speed.
By supplying an analog target voltage in the range 0...+10 V, the speed of rotation can be set in a range from 500 rpm to 5000 rpm with lower speeds, down to ca. 200 rpm, are achievable when less smooth rotation is tolerable.
There are a number of protection functions, like stall protection, reverse-polarity protection, low-voltage cut-off, over-temperature cut-off, and guarantees high operational dependability.
By supplying an analog target voltage in the range 0...+10 V, the speed of rotation can be set in a range from 500 rpm to 5000 rpm with lower speeds, down to ca. 200 rpm, are achievable when less smooth rotation is tolerable.
There are a number of protection functions, like stall protection, reverse-polarity protection, low-voltage cut-off, over-temperature cut-off, and guarantees high operational dependability.
Single-quadrant DC motor speed controller - 0 - 30 VDC, 60 A | BGE 30100
The BGE 30100 is suitable for use in BG motors, and in rough terrain. It...
Single-quadrant DC motor speed controller - 0 - 30 VDC, 60 A | BGE 30100
The BGE 30100 is suitable for use in BG motors, and in rough terrain. It functions in a battery powered BLDC motors. The controller can be set with different parameters, through its built-in USB interface. It operates in a maximum output power of 500 W, and voltage input of 0 up to +10 V.
4-quadrant DC motor speed controller - 10 - 60 VDC, 2 A | BGE 6005
The BGE 6005 is a 4-quadrant controller engineered by Dunkermotoren. It is suitable for use in controlling...
4-quadrant DC motor speed controller - 10 - 60 VDC, 2 A | BGE 6005
The BGE 6005 is a 4-quadrant controller engineered by Dunkermotoren. It is suitable for use in controlling brushless or brushed DC motors.
The unit features an easy-to-use PC software for parameterization. It allows users to easily parameterize various basic modes, such as speed, position and torque. The controller is equipped with a CANopen bus interface, and an integrated motion process system.
The unit features an easy-to-use PC software for parameterization. It allows users to easily parameterize various basic modes, such as speed, position and torque. The controller is equipped with a CANopen bus interface, and an integrated motion process system.
DC motor speed controller - 24 - 48 V, IP54
The 4-Q Control Heidrive is specifically designed to provide an excellent quality functionality...
DC motor speed controller - 24 - 48 V, IP54
The 4-Q Control Heidrive is specifically designed to provide an excellent quality functionality and performance for very specific purposes. It is commonly used for a motor range capacity of "EC-I". The whole controller technology is incorporated within the motors which is built with a 16-bit micro-controller feature to enhance the unit's capabilities.
Single-quadrant DC motor speed controller - 60 - 200 W, IP54
The EC-C is an electronic controller engineered by Heidrive. It features a 1 quadrant...
Single-quadrant DC motor speed controller - 60 - 200 W, IP54
The EC-C is an electronic controller engineered by Heidrive. It features a 1 quadrant function, suitable for use on brushless DC motors.
The unit enables integration inside the terminal box, due to the small and compact design. In addition, it is also compatible to use with EC motors and servo drives, with the use of the Heidrive.
The unit enables integration inside the terminal box, due to the small and compact design. In addition, it is also compatible to use with EC motors and servo drives, with the use of the Heidrive.
Brushless DC motor speed controller - 0.1 - 0.4 kW, 2 - 6 A, IP40 | 1-Q
The 1-Q Series of Brushless DC Motor Speed Controller, manufactured by Heidrive GmbH, is specifically designed...
Brushless DC motor speed controller - 0.1 - 0.4 kW, 2 - 6 A, IP40 | 1-Q
The 1-Q Series of Brushless DC Motor Speed Controller, manufactured by Heidrive GmbH, is specifically designed is a low-cost control for speed-controlled utilization. This device features a reference value input which is made through switch and potentiometer. It is mainly used with all EC motors with commutation sensors.
Moreover, it has an available parameterization which is done by a serial PC interface.
Moreover, it has an available parameterization which is done by a serial PC interface.