+7 (812) 645-08-06
Injection blow molding machines, extrusion blow molding machines
select brand
PET bottle blow-molding machine - 0.5 - 12 L | KSB 2XL
Compact, robust and well-arranged structure.
The structure of the KSB 2XL series is based on an innovative and technically very simple...
The structure of the KSB 2XL series is based on an innovative and technically very simple...
PET bottle blow-molding machine - 0.5 - 12 L | KSB 2XL
Compact, robust and well-arranged structure.
The structure of the KSB 2XL series is based on an innovative and technically very simple concept.
This concept guarantees:
Optimum cost-performance ratio.
Utmost flexibility.
User-friendliness.
Production efficiency.
Thanks to shorter change-over times, the processing of large series with the same products, as well as small series with different products is possible.
Simple design of machine movements, therefore low wear and minimum maintenance.
The structure of the KSB 2XL series is based on an innovative and technically very simple concept.
This concept guarantees:
Optimum cost-performance ratio.
Utmost flexibility.
User-friendliness.
Production efficiency.
Thanks to shorter change-over times, the processing of large series with the same products, as well as small series with different products is possible.
Simple design of machine movements, therefore low wear and minimum maintenance.
PET bottle blow-molding machine - 0.1 - 3 L, max. 6 800 p/h | KSB 4L
The compact, robust, and well arranged structure of the KSB 4L series is based on an innovative and technically very simple concept.This system provides...
PET bottle blow-molding machine - 0.1 - 3 L, max. 6 800 p/h | KSB 4L
The compact, robust, and well arranged structure of the KSB 4L series is based on an innovative and technically very simple concept.This system provides an optimum cost-performance ratio, as well as utmost flexibility, operator-friendliness and production efficiency.
This machine is distinguished by its innovative and technological concepts in combination with a non-complex sequence of movements and an impressive capacity performance.
With the 4L series, PET bottles from 0.1 litres to 2.5 litres can be produced at an output of up to 6,800 bph (with 4 cavities).
This machine is distinguished by its innovative and technological concepts in combination with a non-complex sequence of movements and an impressive capacity performance.
With the 4L series, PET bottles from 0.1 litres to 2.5 litres can be produced at an output of up to 6,800 bph (with 4 cavities).
PET bottle blow-molding machine - 0.1 - 3 L, max. 6 000 p/h | KSB 4LPH
On the KSB 4L PH, a special heating module is installed after the standard heaters. The preforms move through this zone without rotating, and the two opposite sides of the...
PET bottle blow-molding machine - 0.1 - 3 L, max. 6 000 p/h | KSB 4LPH
On the KSB 4L PH, a special heating module is installed after the standard heaters. The preforms move through this zone without rotating, and the two opposite sides of the preforms are intentionally exposed to additional heat.
Using this temperature profile, reduced-weight containers with a distinctly oval shape can be produced, because the moulding characteristics of the material are optimal during the blow-moulding process.
Built-in preferential heating module. Production of reduced-weight containers with a distinctly oval shape.
The use of lower-weight preform grades cuts cost.
Highly individualized oval container shapes.
6.000 Bph.
Using this temperature profile, reduced-weight containers with a distinctly oval shape can be produced, because the moulding characteristics of the material are optimal during the blow-moulding process.
Built-in preferential heating module. Production of reduced-weight containers with a distinctly oval shape.
The use of lower-weight preform grades cuts cost.
Highly individualized oval container shapes.
6.000 Bph.
Stretch blow molding machine for plastic bottles - 5 - 30 L | KSB GIGABLOW
The machine consists of two units: blowing module and heating module.
Blowing module has 2-4 blowing stations.
Mode of drive: Linear motor technic (standard by KOSME).
Manufacturer: Company Bosh (made in Germany).
Linear...
Blowing module has 2-4 blowing stations.
Mode of drive: Linear motor technic (standard by KOSME).
Manufacturer: Company Bosh (made in Germany).
Linear...
Stretch blow molding machine for plastic bottles - 5 - 30 L | KSB GIGABLOW
The machine consists of two units: blowing module and heating module.
Blowing module has 2-4 blowing stations.
Mode of drive: Linear motor technic (standard by KOSME).
Manufacturer: Company Bosh (made in Germany).
Linear guides: Company Schneeberger (made in Germany).
Compensating energy: 75 tons at 40 bar
Stretching: Spindle with Servomotor. An adjustment for multilevel stretching profile is possible.
Blowing valve: Special processing for Company KOSME (Supplier Company Seitz). Nominal size DN 26mm, high life span (over 25 millions circuits), very quick connection and very high repeat-precision.
The transport module consists of transport chain, heating and preform inlet.
The division of the transport chain is 100mm intervals. 40 limbs are provided.
Heating: Adphos heating: two modules with 15 heating zones.
Additional neck cooling is standard at KOSME machines.
Blowing module has 2-4 blowing stations.
Mode of drive: Linear motor technic (standard by KOSME).
Manufacturer: Company Bosh (made in Germany).
Linear guides: Company Schneeberger (made in Germany).
Compensating energy: 75 tons at 40 bar
Stretching: Spindle with Servomotor. An adjustment for multilevel stretching profile is possible.
Blowing valve: Special processing for Company KOSME (Supplier Company Seitz). Nominal size DN 26mm, high life span (over 25 millions circuits), very quick connection and very high repeat-precision.
The transport module consists of transport chain, heating and preform inlet.
The division of the transport chain is 100mm intervals. 40 limbs are provided.
Heating: Adphos heating: two modules with 15 heating zones.
Additional neck cooling is standard at KOSME machines.
PET bottle blow-molding machine - 0.1 - 3 L | KSB 4R
Based on the company's wealth of experience with the KSB 6R we have designed a new KSB 4R rotary blow moulder.
The aim was to develop a reliable, user-friendly machine with a high degree of flexibility and the best quotation rate. Hence the KSB 4R can produce bottles from 0.1...
The aim was to develop a reliable, user-friendly machine with a high degree of flexibility and the best quotation rate. Hence the KSB 4R can produce bottles from 0.1...
PET bottle blow-molding machine - 0.1 - 3 L | KSB 4R
Based on the company's wealth of experience with the KSB 6R we have designed a new KSB 4R rotary blow moulder.
The aim was to develop a reliable, user-friendly machine with a high degree of flexibility and the best quotation rate. Hence the KSB 4R can produce bottles from 0.1 up to 3.0 l with the greatest variety of preforms to be found on the market, up to a neck ring size of 43mm.
This grants a production of top quality PET bottles with reduced energy and air consumption. The special energy-saving, patented modular oven is used to heat the preforms.
As an option, the machine can be operated with an air recycling system, thus saving on the overall air consumption for the KSB 4R's pneumatic system and the preblowing air for the bottles.
Preforms and finished bottles pass through preform heating, the blowing process and bottle discharge on a single level. The machine does not require any deflection processes, and the number of transfers has been optimized to a minimum of six.
First-rate access to all components in the machine interior ensures that mould changes are faster and easier.
The aim was to develop a reliable, user-friendly machine with a high degree of flexibility and the best quotation rate. Hence the KSB 4R can produce bottles from 0.1 up to 3.0 l with the greatest variety of preforms to be found on the market, up to a neck ring size of 43mm.
This grants a production of top quality PET bottles with reduced energy and air consumption. The special energy-saving, patented modular oven is used to heat the preforms.
As an option, the machine can be operated with an air recycling system, thus saving on the overall air consumption for the KSB 4R's pneumatic system and the preblowing air for the bottles.
Preforms and finished bottles pass through preform heating, the blowing process and bottle discharge on a single level. The machine does not require any deflection processes, and the number of transfers has been optimized to a minimum of six.
First-rate access to all components in the machine interior ensures that mould changes are faster and easier.
Single-station blow-molding machine / automatic / for hollow plastic parts - SPZA series
Clamping force : 40000 N - 80000 N
Hollow part volume : 2 l - 10 l
SPZ Series fully automatic blow molding machine has following advantages:
Extrusion system has the characteristics of high output, excellent plasticizing quality,...
Hollow part volume : 2 l - 10 l
SPZ Series fully automatic blow molding machine has following advantages:
Extrusion system has the characteristics of high output, excellent plasticizing quality,...
Single-station blow-molding machine / automatic / for hollow plastic parts - SPZA series
SPZ Series fully automatic blow molding machine has following advantages:
Extrusion system has the characteristics of high output, excellent plasticizing quality, stable extrusion, capability to run many kinds of resin, etc. Parison control guarantees the uniformity of thickness of final products.
The clamping device can be moved on liner guide track and locked in the center. It has the characteristics of high precision, uniformity force, low resistance, long life, quick and stable moving, energy-saving and easy maintenance.
It adopts centralized computer control system with inline automatic cutting and scrap edge recycling
Extrusion system has the characteristics of high output, excellent plasticizing quality, stable extrusion, capability to run many kinds of resin, etc. Parison control guarantees the uniformity of thickness of final products.
The clamping device can be moved on liner guide track and locked in the center. It has the characteristics of high precision, uniformity force, low resistance, long life, quick and stable moving, energy-saving and easy maintenance.
It adopts centralized computer control system with inline automatic cutting and scrap edge recycling
Multilayer blow-molding machine / for hollow plastic parts - BMJⅥ-500
Clamping force : max 1200000.0 N
Hollow part volume : max 500.0 l
Jinming had successfully developed a BMJ-500 SIX-LAYER COEXTRUSION BLOW MOLDING MACHINE FOR GASOLINE TANK. It is mainly composed of six extruders with single screw, manual double-station screen changer, six-layer coextrusion...
Hollow part volume : max 500.0 l
Jinming had successfully developed a BMJ-500 SIX-LAYER COEXTRUSION BLOW MOLDING MACHINE FOR GASOLINE TANK. It is mainly composed of six extruders with single screw, manual double-station screen changer, six-layer coextrusion...
Multilayer blow-molding machine / for hollow plastic parts - BMJⅥ-500
Jinming had successfully developed a BMJ-500 SIX-LAYER COEXTRUSION BLOW MOLDING MACHINE FOR GASOLINE TANK. It is mainly composed of six extruders with single screw, manual double-station screen changer, six-layer coextrusion accumulating die head, double-plate type mould locking device without tie bar, mould moving device, blow device, pre-sealing device, mechanical arm, main hydraulic system, servo systems and hydraulic control system, machine frame, pneumatic control system, cooling system and electrical control system and other components.
The equipment has an advantage of advanced technologies, low power consumption and stable running performance, such as the patented technology of mould locking without tie bar and the advanced technology of crinkle type screw for EVOH processing and multiple layers coextrusion accumulating die head
The equipment has an advantage of advanced technologies, low power consumption and stable running performance, such as the patented technology of mould locking without tie bar and the advanced technology of crinkle type screw for EVOH processing and multiple layers coextrusion accumulating die head
Hollow plastic part blow-molding machine - BM series
Clamping force : max 1500000.0 N
Hollow part volume : max 1000.0 l
BM series large accumulating blow molding machine is our newly designed product at the world advanced level. The screw is specially designed to process HMWPE for high output and plasticizing...
Hollow part volume : max 1000.0 l
BM series large accumulating blow molding machine is our newly designed product at the world advanced level. The screw is specially designed to process HMWPE for high output and plasticizing...
Hollow plastic part blow-molding machine - BM series
BM series large accumulating blow molding machine is our newly designed product at the world advanced level. The screw is specially designed to process HMWPE for high output and plasticizing amount. It's suitable for processing plastic powder and recycled resin. 100 points parison thickness control system is to precisely control the thickness of product. National patented clamp without pulling rod is strong with uniform force. It is equipped with sensor for safety operation. The whole clamping unit moves quickly and stably but in low energy consumption and easy to be disassembled. Advanced centralized computer control system with automatic diagnosis is used to real-time display and monitor machine running as well as saving machine running parameters.
Hollow plastic part blow-molding machine - EBLOW 307 D
EBLOW 307 D
Tandem Blow with calibrated
neck for top and bottom bottle
Example
cosmetic bottle 80ml
Tandem Blow with calibrated
neck for top and bottom bottle
Example
cosmetic bottle 80ml
Twin-station blow-molding machine / for hollow plastic parts - 4 l | EBLOW 307 DL
EBLOW 307 DL
Twin station...
Twin station...
Twin-station blow-molding machine / for hollow plastic parts - 4 l | EBLOW 307 DL
EBLOW 307 DL
Twin station blow moulder up to 4 l
Example
PP shampoo bottle 500ml
Twin station blow moulder up to 4 l
Example
PP shampoo bottle 500ml