+7 (812) 645-08-06
Injection blow molding machines, extrusion blow molding machines
select brand
Injection blow-molding machine - max. 36 000 p/h | ECS series
SIPA integrated systems, the ECS range, starts from the raw material, the resin,...
Injection blow-molding machine - max. 36 000 p/h | ECS series
SIPA integrated systems, the ECS range, starts from the raw material, the resin, and takes the process through to the finished container without any interruption, with total automated control of all phases of production. SIPA ECS integrated system is the fastest single-stage platform available, with output up to 600 bpm.
PET bottle blow-molding machine - max. 50 400 p/h | SFR series
Seven models are today available. The number after the acronym indicates the number...
PET bottle blow-molding machine - max. 50 400 p/h | SFR series
Seven models are today available. The number after the acronym indicates the number of blowing cavities. The model SFR 9/27 is equipped with 9 stations able to carry either 9 standard shell molds or 9 triple-cavity molds for a total of 27 blowing cavities. SFR 12 EVO, SFR 8 EVO, SFR 6 EVO models run at 2,200 bottles/hour/cavity.
PET bottle blow-molding machine - max. 10 800 p/h | SFL series
The SFL linear blowmolding machines stand out on the market due to their high productivity (up to 1,800 bottles/hour/cavity) and low energy consumption, but above all as a result of their versatility...
PET bottle blow-molding machine - max. 10 800 p/h | SFL series
The SFL linear blowmolding machines stand out on the market due to their high productivity (up to 1,800 bottles/hour/cavity) and low energy consumption, but above all as a result of their versatility and flexibility. The range of SFL allows today to produce the full range of standard and special container: standard and refillable bottles, hot-fill bottles, large size bottles (up to 30 litres), fully-customised bottled for cosmetics, detergents and chemical products , bottles with handles, containers with shaped necks, oval bottles with differential heating, extremely light weighting bottles with lightweight necks, OPP and PLA bottles and small bottles for pharmaceutical products. Wide mouth jars containers can be produced at high speed and up to 15 liters size.
PET bottle blow-molding machine - max. 6 000 p/h | Start Blow
The easy way to succeed
Designed specifically to enable companies in emerging markets to make their steps into the PET bottle production. Satisfy the need for small and simple blow...
Designed specifically to enable companies in emerging markets to make their steps into the PET bottle production. Satisfy the need for small and simple blow...
PET bottle blow-molding machine - max. 6 000 p/h | Start Blow
The easy way to succeed
Designed specifically to enable companies in emerging markets to make their steps into the PET bottle production. Satisfy the need for small and simple blow...
Designed specifically to enable companies in emerging markets to make their steps into the PET bottle production. Satisfy the need for small and simple blow...
Blow-molding machine with accumulator head - TA 300
Created for the production of articles and containers considered of...
Blow-molding machine with accumulator head - TA 300
Created for the production of articles and containers considered of small size for the technology of accumulator head machines, it is typically used for the production of toys, automotive air ducts and plastic tanks for the packaging industry with a maximum capacity of 20 lt.
Blow-molding machine with accumulator head - TA 500
This the intermediate sized blow molding machine capable of producing the most varied type of plastic articles.
Designed to be modular and configurable...
Designed to be modular and configurable...
Blow-molding machine with accumulator head - TA 500
This the intermediate sized blow molding machine capable of producing the most varied type of plastic articles.
Designed to be modular and configurable at the time of order, it is offered in three versions: TA-500, 500L, 500XL.
With the same technical characteristics, these acronyms denote the different vertical size of the mould platens.
To optimize the distribution of the clamping force over the length of the mould, the XL model is equipped with a double cylinder for the movement of each mould platen. In this case, the cylinders are double ended and also perform the function of guide bars
Designed to be modular and configurable at the time of order, it is offered in three versions: TA-500, 500L, 500XL.
With the same technical characteristics, these acronyms denote the different vertical size of the mould platens.
To optimize the distribution of the clamping force over the length of the mould, the XL model is equipped with a double cylinder for the movement of each mould platen. In this case, the cylinders are double ended and also perform the function of guide bars
Blow-molding machine - max. 150 l | TA 800
Available in TA800 and TA800L versions, it has been designed for the production of articles...
Blow-molding machine - max. 150 l | TA 800
Available in TA800 and TA800L versions, it has been designed for the production of articles with a maximum capacity of 100-150 lt. Its main field of application is the production of large industrial technical articles.
Like all the blow moulding machines of the TA series, it has the special "tie-bar less" design to allow the installation of oversized moulds.
Like all the blow moulding machines of the TA series, it has the special "tie-bar less" design to allow the installation of oversized moulds.
Blow-molding machine - max. 200 l | TA 1000
This is a versatile machine, able to produce drums of medium and large size (up to 200 lt).
Like...
Like...
Blow-molding machine - max. 200 l | TA 1000
This is a versatile machine, able to produce drums of medium and large size (up to 200 lt).
Like the TA-500XL, this machine also employs double acting cylinders to drive the platen movements.
As with all the TA series blow moulding machines, in case of need, the blow stand can be quickly removed to fit blowing devices dedicated to specific moulds.
Like the TA-500XL, this machine also employs double acting cylinders to drive the platen movements.
As with all the TA series blow moulding machines, in case of need, the blow stand can be quickly removed to fit blowing devices dedicated to specific moulds.
Blow-molding machine - 220 l | TA 1300
It is the machine suitable to blow mould large parts, especially...
Blow-molding machine - 220 l | TA 1300
It is the machine suitable to blow mould large parts, especially...