+7 (812) 645-08-06
Surge protection devices: type 2 surge arresters
select brand
Type 2 surge arrester / for measurement and control circuits - SP2 series
The Eaton SP2 Series of surge protective devices are suitable for use with applications...
Type 2 surge arrester / for measurement and control circuits - SP2 series
The Eaton SP2 Series of surge protective devices are suitable for use with applications that require both a compact footprint and a reliable and efficient performance.
The SP2 Series has been developed as an answer to control panel application problems and buyers will be happy with the reliability and economic value of the device.
The SP2 Series has been developed as an answer to control panel application problems and buyers will be happy with the reliability and economic value of the device.
Single-pole surge arrester / type 2 / DIN rail / for power supplies - 140 - 460 V, 15 - 65 kA | ATSUB Mod. series
Current : 15000 A - 65000 A
Voltage : 140 V - 460 V
Efficient protection against transient overvoltages for electrical supply lines with or without neutral using a metal oxide varistors and gas discharge tubes. It allows protection...
Voltage : 140 V - 460 V
Efficient protection against transient overvoltages for electrical supply lines with or without neutral using a metal oxide varistors and gas discharge tubes. It allows protection...
Single-pole surge arrester / type 2 / DIN rail / for power supplies - 140 - 460 V, 15 - 65 kA | ATSUB Mod. series
Efficient protection against transient overvoltages for electrical supply lines with or without neutral using a metal oxide varistors and gas discharge tubes. It allows protection of three-phase lines type TT, TNS, TNC and IT. Medium protection according to coordinated stages protection recommended in Regulation of Low Voltages (REBT ITC23).
Its provided with removable cartridges that allows its replacement in case of fault thus without changing the base.
Tested and certified as Type 1, 2 and 3 according to regulations EN 61643- 11 and GUIDE-BT-23 from REBT. Suitable for Categories I, II, III and IV equipment according to ITC-BT-23 from REBT.
Its provided with removable cartridges that allows its replacement in case of fault thus without changing the base.
Tested and certified as Type 1, 2 and 3 according to regulations EN 61643- 11 and GUIDE-BT-23 from REBT. Suitable for Categories I, II, III and IV equipment according to ITC-BT-23 from REBT.
Multi-pole surge arrester / type 2 / wall-mount - 255 - 440 V, 15 - 65 kA | ATCOMPACT 2 series
Current : 15000 A - 65000 A
Voltage : 255 V - 440 V
ATCOMPACT protection boxes are made of several kind of nSPD aiming the protection of all lines out from single-phase SPD, including the protective fuses against short circuits.
ATCOMPACT...
Voltage : 255 V - 440 V
ATCOMPACT protection boxes are made of several kind of nSPD aiming the protection of all lines out from single-phase SPD, including the protective fuses against short circuits.
ATCOMPACT...
Multi-pole surge arrester / type 2 / wall-mount - 255 - 440 V, 15 - 65 kA | ATCOMPACT 2 series
Current : 15000 A - 65000 A
Voltage : 255 V - 440 V
ATCOMPACT protection boxes are made of several kind of nSPD aiming the protection of all lines out from single-phase SPD, including the protective fuses against short circuits.
ATCOMPACT...
Voltage : 255 V - 440 V
ATCOMPACT protection boxes are made of several kind of nSPD aiming the protection of all lines out from single-phase SPD, including the protective fuses against short circuits.
ATCOMPACT...
Transient voltage and lightning protection surge arrester / type 2 / surge arrester - max. 400 V, 40 kA | ATCONTROL/R P(T)-T
Current : 40000 A
Voltage : 400 V
ATCONTROL/R P protectors actuate when detecting a temporary
overvoltage, triggering the connected contactor (S1, S2). This...
Voltage : 400 V
ATCONTROL/R P protectors actuate when detecting a temporary
overvoltage, triggering the connected contactor (S1, S2). This...
Transient voltage and lightning protection surge arrester / type 2 / surge arrester - max. 400 V, 40 kA | ATCONTROL/R P(T)-T
ATCONTROL/R P protectors actuate when detecting a temporary
overvoltage, triggering the connected contactor (S1, S2). This contactor
disconnects the line thus protecting down-stream installed equipment.
When the permanent overvoltage ceases, the protector reconnects the
contactor.
The temporary overvoltage warning system is formed by 2 light indicators:
green (correct power supply) and red (overvoltage). It is provided with a test
button for checking if the installation has been properly made.
overvoltage, triggering the connected contactor (S1, S2). This contactor
disconnects the line thus protecting down-stream installed equipment.
When the permanent overvoltage ceases, the protector reconnects the
contactor.
The temporary overvoltage warning system is formed by 2 light indicators:
green (correct power supply) and red (overvoltage). It is provided with a test
button for checking if the installation has been properly made.
Single-pole surge arrester / type 2 / DIN rail / for power supplies - 15 - 65 kA, 140 - 460 V | ATSUB series
Current : 15000 A - 65000 A
Voltage : 140 V - 460 V
ATSUB series is an effective protection against transient over voltages for electrical supply lines with or without utilizing metal oxide varistors and gas release tubes. It permits insurance...
Voltage : 140 V - 460 V
ATSUB series is an effective protection against transient over voltages for electrical supply lines with or without utilizing metal oxide varistors and gas release tubes. It permits insurance...
Single-pole surge arrester / type 2 / DIN rail / for power supplies - 15 - 65 kA, 140 - 460 V | ATSUB series
ATSUB series is an effective protection against transient over voltages for electrical supply lines with or without utilizing metal oxide varistors and gas release tubes. It permits insurance of three-stage lines sort TT, TNS, TNC and IT Medium security as per composed stages assurance suggested in Regulation of Low Voltages (REBT Itc23).
Suitable for Categories l, II, III and IV gear as indicated by ITC-BT-23 from R EBT. It is Coordinable with different SPDs, for example, ATSHOCK, ATSHIELD and ATCOVER series. Made up of zinc oxide varistors and gas release tubes fit to v/ithstand high flows. It is also conceivable to alter the modules through bolts so as to acquire squares of 2,3 or 4 components, don't deliver deflagration with a single-shaft security.
Suitable for Categories l, II, III and IV gear as indicated by ITC-BT-23 from R EBT. It is Coordinable with different SPDs, for example, ATSHOCK, ATSHIELD and ATCOVER series. Made up of zinc oxide varistors and gas release tubes fit to v/ithstand high flows. It is also conceivable to alter the modules through bolts so as to acquire squares of 2,3 or 4 components, don't deliver deflagration with a single-shaft security.
Single-pole surge arrester / type 2 / DIN rail / for power supplies - 15 - 65 kA, 140 - 460 V | ATSUB-R series
Current : 15000 A - 65000 A
Voltage : 140 V - 460 V
The ATSUB-R is a power supply line surge protection which provides protection...
Voltage : 140 V - 460 V
The ATSUB-R is a power supply line surge protection which provides protection...
Single-pole surge arrester / type 2 / DIN rail / for power supplies - 15 - 65 kA, 140 - 460 V | ATSUB-R series
The ATSUB-R is a power supply line surge protection which provides protection from overvoltages for electrical supply lines. It can be operated with or without the use of steel oxide varistors and gas discharge tubes. The device also offers safety for three phase lines such as TT, TNS, TNS and IT.
Type 2 surge arrester - PSM series
PSM series are devices that are engineered to provide superior service in various applications. The unit is Type 2, Class II device, geared to discharge transient overvoltages in distribution panels.
The device is compliant with IEC-61643-1/DIN rail monobloc criteria. It is installed in supply distribution...
The device is compliant with IEC-61643-1/DIN rail monobloc criteria. It is installed in supply distribution...
Type 2 surge arrester - PSM series
PSM series are devices that are engineered to provide superior service in various applications. The unit is Type 2, Class II device, geared to discharge transient overvoltages in distribution panels.
The device is compliant with IEC-61643-1/DIN rail monobloc criteria. It is installed in supply distribution panels to provide secondary layer of protection, typically in applications already fit with Type 1 safety devices for second stage safety. It is also conducive to use as first stage protection device in applications that are not in the line of direct impact and not already fit with lightening protection devices externally. Commercial and residential applications form the bulk of such applications.
The device has an exceptionally high ability to discharge overvoltage, displaying capacity of 8/20 μs waveform. It is available with maximum powers of 20kA/30kA/40kA. It is mounted on a chassis that can be reversed to enable cable to enter from up or down. Working life parameters are indicated via remote/visually. Voltage capacities are 120/208V-230/400V-277/480V-690V.
They are exclusively suited for use in TNS, TNC, TT, IT earthing units, photovoltaic PV applications, confirming to EN-50539-11.
The device is compliant with IEC-61643-1/DIN rail monobloc criteria. It is installed in supply distribution panels to provide secondary layer of protection, typically in applications already fit with Type 1 safety devices for second stage safety. It is also conducive to use as first stage protection device in applications that are not in the line of direct impact and not already fit with lightening protection devices externally. Commercial and residential applications form the bulk of such applications.
The device has an exceptionally high ability to discharge overvoltage, displaying capacity of 8/20 μs waveform. It is available with maximum powers of 20kA/30kA/40kA. It is mounted on a chassis that can be reversed to enable cable to enter from up or down. Working life parameters are indicated via remote/visually. Voltage capacities are 120/208V-230/400V-277/480V-690V.
They are exclusively suited for use in TNS, TNC, TT, IT earthing units, photovoltaic PV applications, confirming to EN-50539-11.
Type 2 surge arrester / for photovoltaic applications / modular - 40 kA | PSM PV series
The CPT CIRPROTEC surge protection devices of the PSM PV series are made for discharging induced transient overvoltages (Type 2 / Class II), IEC 61643-1 compliant. They are mostly used as second stage...
Type 2 surge arrester / for photovoltaic applications / modular - 40 kA | PSM PV series
The CPT CIRPROTEC surge protection devices of the PSM PV series are made for discharging induced transient overvoltages (Type 2 / Class II), IEC 61643-1 compliant. They are mostly used as second stage protection of various distribution panels (Type 1), or as first stage surge defenses in residential and commercial applications without possibility of direct lightning strike. They feature a 40 kA discharge current with a 8/20 μs waveform, and are mainly used for 600 and 1,000 V DC networks, mostly for photovoltaic PV installation, EN 50539-11 compliant. They also contain durability indicators, a reversible chassis for allowing of cable entry, as well as mechanically polarized cartridges. They are available in models for rigid or flexible cables, or for fork type comb busbar.
Single-phase surge arrester / type 2 - 20 - 40 kA | PSM1 series
The PSM1 series of Type 2 surge protective devices is suitable for the second stage of...
Single-phase surge arrester / type 2 - 20 - 40 kA | PSM1 series
The PSM1 series of Type 2 surge protective devices is suitable for the second stage of protection in supply distribution panels in which Type 1 protection devices are installed, or for the first stage of protection in residential, commercial or other applications not exposed to direct strikes and with no external lightning protection system.
Transient voltage and lightning protection surge arrester / type 2 - 15 - 40 kA | CS1 series
The CS1 is the range of devices for discharging...
Transient voltage and lightning protection surge arrester / type 2 - 15 - 40 kA | CS1 series
The CS1 is the range of devices for discharging induced transient overvoltages in one-phase TT and TN-S elecrical power networks, in accordance with IEC 61643-1. DIN rail monobloc format.
Type 2 surge arrester / for photovoltaic applications - 40 kA | CS23 series
The CS 23 series from Ciprotec is a set of surge protection devices that are especially...
Type 2 surge arrester / for photovoltaic applications - 40 kA | CS23 series
The CS 23 series from Ciprotec is a set of surge protection devices that are especially designed with a Y structure that contains two modules made for DC type 2 protection.
These protectors are ideal for differential and common mode safeguarding against over-voltage within photovoltaic power plants that have maximum voltage up to 1000 V.
These protectors are ideal for differential and common mode safeguarding against over-voltage within photovoltaic power plants that have maximum voltage up to 1000 V.