Surge protection devices: type 2 surge arresters

select brand


CITEL

Low-voltage surge arrester / type 2 / type 3 / with housing - MSB10 series

CITEL Parafounders offer Hard-wired AC surge protectors designed for various applications. The surge protector is used for the protection of a single phase input and it is recommended to use...

Low-voltage surge arrester / type 2 / type 3 / with housing - MSB10 series

CITEL Parafounders offer Hard-wired AC surge protectors designed for various applications. The surge protector is used for the protection of a single phase input and it is recommended to use on the board or in the utility box in mounted position. MSB10 series has everything for you.
The MSB10 features corresponding connection to the AC line and it can be mounted on the wall or plate with the help of self adhesive tape. MSB10C has an enclosure cap and detachable protection circuit. You can connect it through the screw terminal with wall mounting features. MSB10V requires screw terminal for connection and wall mounting quality. It features a compact plastic enclosure, disconnection signals and has compliance with the IEC 61643-1 standards.

Type 3 surge arrester / type 2 / DIN rail / for LED lighting - Imax 10kA / 230-277V single phase / MLPC1 series

The MLPC range is a comprehensive series of AC surge protectors dedicated to LED lighting system. The MLPC are very compact to be integrated into luminaires and are available 2 modes of connection (screw terminal or spring).

Single-phase surge arrester / type 2 / type 3 / ultracompact - 230V / 24Vac-24Vdc / MSB6 series

MSB6 hard-wire AC surge protector unit is specially designed to protect a single-phase input....

Single-phase surge arrester / type 2 / type 3 / ultracompact - 230V / 24Vac-24Vdc / MSB6 series

MSB6 hard-wire AC surge protector unit is specially designed to protect a single-phase input. The device can be mounted on a board or in a utility box. The included LED indicates if the surge protection circuit is operating correctly. The ultra compact unit features an internal AC outlet. The end life of the unit is indicated by a buzzer

AC surge arrester / three-phase / type 2 / thermoplastic - max. 10 kA, 440 V, IP20 | DS10 series

The DS10 Type 2 AC power surge protectors are designed for primary protection of single-phase and three-phase...

AC surge arrester / three-phase / type 2 / thermoplastic - max. 10 kA, 440 V, IP20 | DS10 series

The DS10 Type 2 AC power surge protectors are designed for primary protection of single-phase and three-phase network at the basic electrical panel. These tools can provide a normal mode. They are also offered in one and single phase, 3-phase and 3-phase+neutral editions. These devices are can plug module by phase. It also has optionally available remote signalling. It is made in compliance to IEC61643-1 and EN61643-11.

AC surge arrester / single-phase / common mode / CEI - max. 15 kA, 440 V, IP20 | DS215 series

The DS215 or the Single Phase AC Surge Protector is a tightly-packed high quality device specifically used for protecting the single...

AC surge arrester / single-phase / common mode / CEI - max. 15 kA, 440 V, IP20 | DS215 series

The DS215 or the Single Phase AC Surge Protector is a tightly-packed high quality device specifically used for protecting the single phase networks unto the main switchboard. It is available for a 230V or 120V AC network with several distribution systems such as the TN, TT and IT. This quality device has an easy-to-use and a fast maintenance capability with different unique features including a pluggable module, remote signaling contact, common mode based on the compliance with NF EN 61643-411 and IEC 61643-1.
DIGITAL ELECTRIC ETI

Type 2 surge arrester - ETITEC A series

ETITEC surge arresters protect electrical installations and devices against overvoltage effects which may occur in switching overvoltages and atmospheric discharges. The ZnO non-linear varistor is the main part of the surge arrester while its main characteristic...

Type 2 surge arrester - ETITEC A series

ETITEC surge arresters protect electrical installations and devices against overvoltage effects which may occur in switching overvoltages and atmospheric discharges. The ZnO non-linear varistor is the main part of the surge arrester while its main characteristic is ohmic non-linearity which strongly depends on the applied voltage at the clamps.

Each arrester has a modular construction and a special feature of an interchanging varistor part and visual signalization for varistor thermical failure. When failure occurs, the signalization is performed with a red flag. The models which feature the RC mark are supplied with auxiliary contacts for signalization.

ETITEC A are surge arresters suitable for outdoor mounting. Group A overvoltage protection complies with VDE class C and the protection corresponds to the IEC category II. Capable of discharging enormous pulse currents, protection is provided on power lines. Thermal protection will be activated in cases of permanent arrester damage.

Type 2 surge arrester - ETITEC B series

ETITEC B is surge arrester for indoor provision. Group B overvoltage security is in accordance VDE class B, C. This assurance relates to IEC class I, II. The security is made on the principle dissemination box, as the...

Type 2 surge arrester - ETITEC B series

ETITEC B is surge arrester for indoor provision. Group B overvoltage security is in accordance VDE class B, C. This assurance relates to IEC class I, II. The security is made on the principle dissemination box, as the first level of assurance against lightning strikes, incomplete immediate, roundabout barometrical releases and prompted surges.

The essential packaging stays in the top cap settling DIN rail. ETITEC B 230/100g is an overvoltage arrester for assurance against fractional immediate and circuitous climatic releases. It is utilized as a galvanic partition between N-PE conductor in TT frameworks. Preferences: - sign window of defective gadget - two module system. In the event of lasting arrestor harm, warm security is actuated which signalizes broken arrester. Subsequently just the varistor overvoltage embed must be supplanted.

Type 2 surge arrester / DIN rail - ETITEC C series

The ETITEC C is surge arrester intended for indoor applications. The C 255/20 G is an overvoltage arrester with a gas discharge tube for protection against indirect lightning strikes, and it is used as a galvanic separation between N-PE conductor...

Type 2 surge arrester / DIN rail - ETITEC C series

The ETITEC C is surge arrester intended for indoor applications. The C 255/20 G is an overvoltage arrester with a gas discharge tube for protection against indirect lightning strikes, and it is used as a galvanic separation between N-PE conductor in TT network systems. Features an indication window for when the device develops a fault, has remote signalisation, and mounting on top hat fixing DIN rail. The Group C surge protection is in accordance with VDE class C, and this protection corresponds to IEC category II. The protection is made on the subdistribution box, as the second level of protection against overvoltage indirect lightning strikes. In case of permanent arrestor damage, the thermal protection is activated which indicates a faulty arrester. Please note that the first number of designation 1+0, 2+0, 3+1 etc. indicates the number of varistors. The second one indicates the following- number 0 indicates there is no gas discharge tube, number 1 indicates there is.

Type 2 surge arrester / for photovoltaic applications - 20 kA, 100 - 1 000 V | ETITEC C-PV series

The ETI ETITEC C-PV series is an array of Type-2 surge arresters...

Type 2 surge arrester / for photovoltaic applications - 20 kA, 100 - 1 000 V | ETITEC C-PV series

The ETI ETITEC C-PV series is an array of Type-2 surge arresters that is engineered to protect photovoltaic systems from indirect discharge. These units are integrated with two to three varistor stages that is protected by a thermal-disconnection device.

Type 2 surge arrester - ETITEC Series C

The ETITEC S C is a surge arrester designed to be used indoors. This product complies with the VDE class C and its protection suits the IEC category II. The potection happens on the subdistribution...

Type 2 surge arrester - ETITEC Series C

The ETITEC S C is a surge arrester designed to be used indoors. This product complies with the VDE class C and its protection suits the IEC category II. The potection happens on the subdistribution box, as the second level of protection that counters overvoltage, indirect lightning strikes.It is equipped with a current limiter, a high performing GDT and a thermal control function or CGT that prolong the life of SPD's and safeguard the MOV.

In an instance of indefinite arrester damage, its thermal protection will be activated and it indicates faulty arrester. It can limit current for long time span with minimal degradation. Its thermal disconnection mechanism is improved and It offers a service warranty of 7 years.
{{item.name}}