+7 (812) 645-08-06
Other gearboxes
select brand
Right-angle crown gear reducer - i= 4:1 - 113:1 | EtaCrown®
EtaCrown® angle gearhead is embedded with a very sophisticated technology, making it outstanding and efficient. Hence it is noted for delivering more power output, efficiency, productivity, torque and cost savings....
Right-angle crown gear reducer - i= 4:1 - 113:1 | EtaCrown®
EtaCrown® angle gearhead is embedded with a very sophisticated technology, making it outstanding and efficient. Hence it is noted for delivering more power output, efficiency, productivity, torque and cost savings....
Right-angle crown gear reducer - EtaCrown® Plus
EtaCrown Plus is a compact drive unit manufactured by Zeitlauf. This tool is characterized by its high performance density, and a...
Right-angle crown gear reducer - EtaCrown® Plus
EtaCrown Plus is a compact drive unit manufactured by Zeitlauf. This tool is characterized by its high performance density, and a compact bevel gearhead. Its crown and planetary gear combination enables quality operation of the unit. This tool continues the success of the EtaCrown gearhead series with its enhancement, and provides improved technology when it comes to energy efficiency, safety, and environmental direction. Another feature of the device is its double strength in redefined dimension performance.
Vehicle gear reducer / transmission - HT600/3000
HT 600/3000 gearbox for combined drive systems is designed for vehicles...
Vehicle gear reducer / transmission - HT600/3000
HT 600/3000 gearbox for combined drive systems is designed for vehicles with a drive train of maximum 19 to 32 tons.
Torque-mechanical transmission -
Torque-hydrostatic drive -
Drive ratio-hydraulic motor/output -
Power-pump outputs -
Torque-mechanical transmission -
Torque-hydrostatic drive -
Drive ratio-hydraulic motor/output -
Power-pump outputs -
Transmission gear reducer / for vehicles - HT380/3000
HT 380/3000 gearbox for combined drive systems is designed for vehicles...
Transmission gear reducer / for vehicles - HT380/3000
HT 380/3000 gearbox for combined drive systems is designed for vehicles with a drive train of maximum 19 to 26 tons.
Torque-mechanical transmission -
Torque-hydrostatic drive -
Drive ratio-hydraulic motor/output -
Power-pump outputs -
Torque-mechanical transmission -
Torque-hydrostatic drive -
Drive ratio-hydraulic motor/output -
Power-pump outputs -
Vehicle gear reducer - RPM15/3000
RPM15/3000 gearbox for combined drive systems is designed for vehicles with a drive train of...
Vehicle gear reducer - RPM15/3000
RPM15/3000 gearbox for combined drive systems is designed for vehicles with a drive train of...
Harmonic gear reducer / precision - i= 50:1 - 160:1, 23 - 841 Nm | CobaltLine®-CP series
CobaltLine®-CP Series Units are available in six sizes with gear ratios of 50, 80, 100, 120 and 160:1 offering repeatable peak torques from 23 to 841 Nm.
The precision output bearing with high tilting capacity often allows direct attachment of heavy payloads without the need for further support, thereby...
The precision output bearing with high tilting capacity often allows direct attachment of heavy payloads without the need for further support, thereby...
Harmonic gear reducer / precision - i= 50:1 - 160:1, 23 - 841 Nm | CobaltLine®-CP series
CobaltLine®-CP Series Units are available in six sizes with gear ratios of 50, 80, 100, 120 and 160:1 offering repeatable peak torques from 23 to 841 Nm.
The precision output bearing with high tilting capacity often allows direct attachment of heavy payloads without the need for further support, thereby...
The precision output bearing with high tilting capacity often allows direct attachment of heavy payloads without the need for further support, thereby...
Harmonic gear reducer / hollow-shaft - i= 50:1 - 160:1, 23 - 841 Nm | CobaltLine®-2UH series
Maximum torque capacity with extended temperature range
CobaltLine®-2UH Series Units are available in six sizes with gear ratios of 50, 80, 100, 120 and 160:1 offering repeatable...
CobaltLine®-2UH Series Units are available in six sizes with gear ratios of 50, 80, 100, 120 and 160:1 offering repeatable...
Harmonic gear reducer / hollow-shaft - i= 50:1 - 160:1, 23 - 841 Nm | CobaltLine®-2UH series
Maximum torque capacity with extended temperature range
CobaltLine®-2UH Series Units are available in six sizes with gear ratios of 50, 80, 100, 120 and 160:1 offering repeatable...
CobaltLine®-2UH Series Units are available in six sizes with gear ratios of 50, 80, 100, 120 and 160:1 offering repeatable...
Harmonic gear reducer / hollow-shaft - i= 50:1 - 160:1, 23 - 3 419 Nm | CSG-2UH series
Increased torque range
CSG-2UH Series Units are available in ten sizes with gear ratios of 50, 80, 100, 120 and 160:1 offering repeatable peak torques from 23 to 3419 Nm.
The...
CSG-2UH Series Units are available in ten sizes with gear ratios of 50, 80, 100, 120 and 160:1 offering repeatable peak torques from 23 to 3419 Nm.
The...
Harmonic gear reducer / hollow-shaft - i= 50:1 - 160:1, 23 - 3 419 Nm | CSG-2UH series
Increased torque range
CSG-2UH Series Units are available in ten sizes with gear ratios of 50, 80, 100, 120 and 160:1 offering repeatable peak torques from 23 to 3419 Nm.
The output bearing with high tilting rigidity enables the direct introduction of high payloads without further support and thus permits simple and space saving designs.
Standard servo motors can be attached in a compact manner. The Units cover a wide torque range and feature long service life, confirmed by many years of successful service. Unit and motor together form a compact and lightweight system capable of quickly withstanding high loads. Due to the Units positioning accuracy, stable machine characteristics with short cycle times are guaranteed.
CSG-2UH Series Units are available in ten sizes with gear ratios of 50, 80, 100, 120 and 160:1 offering repeatable peak torques from 23 to 3419 Nm.
The output bearing with high tilting rigidity enables the direct introduction of high payloads without further support and thus permits simple and space saving designs.
Standard servo motors can be attached in a compact manner. The Units cover a wide torque range and feature long service life, confirmed by many years of successful service. Unit and motor together form a compact and lightweight system capable of quickly withstanding high loads. Due to the Units positioning accuracy, stable machine characteristics with short cycle times are guaranteed.
Harmonic gear reducer / precision - i= 50:1 - 160:1, 5.4 - 745 Nm | CPU-S series
Increased precision output bearing and flexible connectivity
The CPU Series Units are available in nine sizes with gear ratios of 30, 50, 80, 100, 120 and 160:1 offering repeatable peak torques from 9 to 1840 Nm.
The precision output bearing with high tilting capacity often allows direct attachment...
The CPU Series Units are available in nine sizes with gear ratios of 30, 50, 80, 100, 120 and 160:1 offering repeatable peak torques from 9 to 1840 Nm.
The precision output bearing with high tilting capacity often allows direct attachment...
Harmonic gear reducer / precision - i= 50:1 - 160:1, 5.4 - 745 Nm | CPU-S series
Increased precision output bearing and flexible connectivity
The CPU Series Units are available in nine sizes with gear ratios of 30, 50, 80, 100, 120 and 160:1 offering repeatable peak torques from 9 to 1840 Nm.
The precision output bearing with high tilting capacity often allows direct attachment of heavy payloads without the need for further support, thereby providing simple and space saving design installations.
The CPU Series is available in three versions: the CPU-M Unit for direct mounting of any servo motor, the CPU-H Unit with hollow shaft to feed through supply lines for further drive systems and the CPU-S Unit with stainless steel input shaft enabling flexible integration into your design.
If required, the Units are available as specific configurations tailored to your application, or with particularly high corrosion protection. The high capacity output bearing with maximum tilting rigidity and precision means that the Units can quickly and easily absorb high payloads and feature long service life. The Units are fully sealed and thus ideally suited for use in harsh ambient conditions. The Units accurate positioning guarantees stable machine characteristics with short cycle times guaranteed.
The CPU Series Units are available in nine sizes with gear ratios of 30, 50, 80, 100, 120 and 160:1 offering repeatable peak torques from 9 to 1840 Nm.
The precision output bearing with high tilting capacity often allows direct attachment of heavy payloads without the need for further support, thereby providing simple and space saving design installations.
The CPU Series is available in three versions: the CPU-M Unit for direct mounting of any servo motor, the CPU-H Unit with hollow shaft to feed through supply lines for further drive systems and the CPU-S Unit with stainless steel input shaft enabling flexible integration into your design.
If required, the Units are available as specific configurations tailored to your application, or with particularly high corrosion protection. The high capacity output bearing with maximum tilting rigidity and precision means that the Units can quickly and easily absorb high payloads and feature long service life. The Units are fully sealed and thus ideally suited for use in harsh ambient conditions. The Units accurate positioning guarantees stable machine characteristics with short cycle times guaranteed.
Harmonic gear reducer / hollow-shaft - i= 30:1 - 160:1, 9 - 1 840 Nm | HFUC-2UH series
The standard series
HFUC-2UH Series Units are available in thirteen sizes with gear ratios of 30, 50, 80, 100, 120 and 160:1 offering repeatable peak torques from 9 to 9180 Nm.
The output bearing with high tilting...
HFUC-2UH Series Units are available in thirteen sizes with gear ratios of 30, 50, 80, 100, 120 and 160:1 offering repeatable peak torques from 9 to 9180 Nm.
The output bearing with high tilting...
Harmonic gear reducer / hollow-shaft - i= 30:1 - 160:1, 9 - 1 840 Nm | HFUC-2UH series
The standard series
HFUC-2UH Series Units are available in thirteen sizes with gear ratios of 30, 50, 80, 100, 120 and 160:1 offering repeatable peak torques from 9 to 9180 Nm.
The output bearing with high tilting...
HFUC-2UH Series Units are available in thirteen sizes with gear ratios of 30, 50, 80, 100, 120 and 160:1 offering repeatable peak torques from 9 to 9180 Nm.
The output bearing with high tilting...