+7 (812) 645-08-06
Other forming machines
select brand
Electric bending machine / spiral for reinforcing steel bars - PF 32 MON
This three-phase machine is ideal for difficult job situations and fatigue, thanks to its one-block body and excellent mechanical characteristics. The bending...
Electric bending machine / spiral for reinforcing steel bars - PF 32 MON
This three-phase machine is ideal for difficult job situations and fatigue, thanks to its one-block body and excellent mechanical characteristics. The bending disk can be rotated in two ways - clockwise and anti-clockwise. It comes with all the essential characteristics needed for normal bendings. The excellent design of the machine and the modern technology embedded in it promises optimal performance while utilizing low power. Here are some of the accessories used with this machine - tool set for stirrup bending speed variator, double foot pedal, selector panel 9 x 9 and special tooling for spirals
Electric bending machine / spiral for reinforcing steel bars - PF 32 TRI
Tecnor presents PF series bending machines. They have a single-block body to assure of mechanical features, including in challenging job environments and fatigue. They allow clockwise and anticlockwise...
Electric bending machine / spiral for reinforcing steel bars - PF 32 TRI
Tecnor presents PF series bending machines. They have a single-block body to assure of mechanical features, including in challenging job environments and fatigue. They allow clockwise and anticlockwise rotation of the bending disk in the two senses. They come complete with all the key accessories for regular bendings.
They provide high energy saving. The quick machines with reduction gears have been made with advanced technology. As a result, they allow topmost performances with least consumption of power.
For improved ease of use and increased time savings, PF series comes with certain recommended accessories. For stirrup bending, they provide a tool set. Also available are a speed variator, double foot pedal, 9 x 9 selector panel, and unique tooling for spirals.
They provide high energy saving. The quick machines with reduction gears have been made with advanced technology. As a result, they allow topmost performances with least consumption of power.
For improved ease of use and increased time savings, PF series comes with certain recommended accessories. For stirrup bending, they provide a tool set. Also available are a speed variator, double foot pedal, 9 x 9 selector panel, and unique tooling for spirals.
Electric bending machine / spiral for reinforcing steel bars - PF 40 TRI
The PF 40 TRI is ingeniously devised to provide exceptional performances, high productivity and ultimate user satisfaction. The single piece body facilitates ergonomically and mechanically balanced operations, thereby preventing...
Electric bending machine / spiral for reinforcing steel bars - PF 40 TRI
The PF 40 TRI is ingeniously devised to provide exceptional performances, high productivity and ultimate user satisfaction. The single piece body facilitates ergonomically and mechanically balanced operations, thereby preventing operator fatigue even in demanding applications. The bending disc rotates both anti-clockwise and clockwise, which ensures convenience in operations.
The machine provides a quick turnaround time and is equipped with ultra-high tech reduction gears which ensure high caliber performances with minimum consumption of power. The machine is available with a vast choice of accessories which can be integrated to facilitate maximum ease of use and to minimize time, cost and power. Users can choose from speed regulators, 9x9 display panels, dual foot pedals, specialized tools dedicated for spirals and tools for stirrup bending operations.
The machine provides a quick turnaround time and is equipped with ultra-high tech reduction gears which ensure high caliber performances with minimum consumption of power. The machine is available with a vast choice of accessories which can be integrated to facilitate maximum ease of use and to minimize time, cost and power. Users can choose from speed regulators, 9x9 display panels, dual foot pedals, specialized tools dedicated for spirals and tools for stirrup bending operations.
Electric bending machine / spiral for reinforcing steel bars - PG 26 SEIM TRI/MON
TECMOR twisting equipment features disc rotation in a clock-wise or reverse clock manner. It offers yield as well as automated halt post twisting as...
Electric bending machine / spiral for reinforcing steel bars - PG 26 SEIM TRI/MON
TECMOR twisting equipment features disc rotation in a clock-wise or reverse clock manner. It offers yield as well as automated halt post twisting as per the pre-set angle with in a low-profile and instant manner. These quick equipments featuring depletion gears are constructed using advanced mechanism for permitting optimum operations with enormous power savings. A single-chip cast ensures the automated properties even in challenging and stressful tasks.
It also features various accessories such as a tool kit, a 9 x 9 selector console and unique tooling for spirals.
It also features various accessories such as a tool kit, a 9 x 9 selector console and unique tooling for spirals.
Edge-trimming machine - max. 1 500 x 2 mm | 1735, 1736 series
Dimeco Alipresse's 1735 series of knurl edge trimming shears are designed with two pairs...
Edge-trimming machine - max. 1 500 x 2 mm | 1735, 1736 series
Dimeco Alipresse's 1735 series of knurl edge trimming shears are designed with two pairs of 160 mm dia circular knives. These tools has a fixed vertical distance between the knives, and a fine adjustment over the vernier or length shims. In addition, the series features Neoprene driving rings, and a width that can be adjusted equally with crank.
Tube forming machine / for end fittings / CNC - max. ø 50 mm | TUBE-FORM ELE
The tube-form ELE is a range of electric CNC machines. It is designed for combined tube-end operations on tubes with a maximum...
Tube forming machine / for end fittings / CNC - max. ø 50 mm | TUBE-FORM ELE
The tube-form ELE is a range of electric CNC machines. It is designed for combined tube-end operations on tubes with a maximum diameter of 50 mm. All of the machine's movements are programmed and run electrically, thus ensuring the accuracy and consistency of the output. The modular design of the model enables the organization of a smooth process flow.
A maximum of six ram stations are featured in the ELE. It also works with a combination of the ram and rotary tool processes.
A maximum of six ram stations are featured in the ELE. It also works with a combination of the ram and rotary tool processes.
Tube forming machine / for end fittings - AST30
The AST30 is a CNC end-forming machine manufactured by BLM Group. The device is equipped with six working stations, one of which could be rotary applicable...
Tube forming machine / for end fittings - AST30
The AST30 is a CNC end-forming machine manufactured by BLM Group. The device is equipped with six working stations, one of which could be rotary applicable for machining. The six forming stations may be used and configured for end-forming like expansion, reduction, rolling, and doming trimming.
The control unit is capable of programming the axes of the apparatus for total efficiency without the need for manual adjustments. The unit is characterized by its capability for automatic loading and unloading of device, which enhances the quality and consistency of the unit.
The control unit is capable of programming the axes of the apparatus for total efficiency without the need for manual adjustments. The unit is characterized by its capability for automatic loading and unloading of device, which enhances the quality and consistency of the unit.
Tube forming machine / for end fittings / CNC - max. ø 100 mm | AST 80, AST 100, AST 122
CNC tube end-former features a modifiable establishing, operating and rolling tasks for tube with a maximum O.D. of 100mm. The device is equipped with six functional and modifiable tools which can be adjusted as basic forming supplements...
Tube forming machine / for end fittings / CNC - max. ø 100 mm | AST 80, AST 100, AST 122
CNC tube end-former features a modifiable establishing, operating and rolling tasks for tube with a maximum O.D. of 100mm. The device is equipped with six functional and modifiable tools which can be adjusted as basic forming supplements or operating tools. These can also combine using both methodologies on a similar tube-like element. This results in a better productivity of the working cycle, enhances precision, consistency without packing or unpacking along with less cycle spans.
Additionally, the DNC regulation section mechanically adjusts and regulates two axes of the equipment for optimum productivity without any physical modifications. It can be accessed in three different versions including AST80 with an optimum tube OD of 80 mm, up to 12.000 kg punching pressure and AST100 with 100 mm tube O.D. and 18.000 kg punching pressure. It also features AST122 with a punching pressure of 22.000 kg and up to 100 mm of tube OD.
Additionally, the DNC regulation section mechanically adjusts and regulates two axes of the equipment for optimum productivity without any physical modifications. It can be accessed in three different versions including AST80 with an optimum tube OD of 80 mm, up to 12.000 kg punching pressure and AST100 with 100 mm tube O.D. and 18.000 kg punching pressure. It also features AST122 with a punching pressure of 22.000 kg and up to 100 mm of tube OD.
Tube forming machine / for end fittings / with calibration - TUBE-FORM
The Tube-Form is a CNC tube end-forming equipment that comes with a rotary table. The model is also equipped...
Tube forming machine / for end fittings / with calibration - TUBE-FORM
The Tube-Form is a CNC tube end-forming equipment that comes with a rotary table. The model is also equipped with four auto-indexing pre-load stations, and a multi-station. The unit has the capacity to accommodate up to six forming stations and up to two supplementary rotary stations that are intended for rolling and machining processes. Each pre-load station has the capacity to take more than one tube enhancing output.