+7 (812) 645-08-06
Other forming machines
select brand
Forming press / hydraulic / press / blank - 16 000 - 100 000 kN
Hydraulic press lines are mainly used to manufacture a wide variety of parts in small to medium lot sizes. Depending on the required forming operations, the line typically consists of four to six single presses. The production process is fully automated from the blank to the...
Forming press / hydraulic / press / blank - 16 000 - 100 000 kN
Hydraulic press lines are mainly used to manufacture a wide variety of parts in small to medium lot sizes. Depending on the required forming operations, the line typically consists of four to six single presses. The production process is fully automated from the blank to the finished component. Depending on requirements, automation is provided by conventional robots or Crossbar Robots developed by Schuler.
The control and graphic display for hydraulic press lines offer the operator uniform, user-friendly operation, efficient fault diagnostics and the management of all process and die data for all presses and automation.
Your advantages
Flexibility in the forming process
Ease of maintenance and assembly thanks to block hydraulics
Schulers dynamic cylinder mode switching and ring valve technology increases production rates
Automation for tooling and dies to ensure fast changeovers
Precise slide guiding and rigid press frame
Uniform control concept
User-friendly operation and efficient fault diagnostics
Fast start-up of new die sets
The control and graphic display for hydraulic press lines offer the operator uniform, user-friendly operation, efficient fault diagnostics and the management of all process and die data for all presses and automation.
Your advantages
Flexibility in the forming process
Ease of maintenance and assembly thanks to block hydraulics
Schulers dynamic cylinder mode switching and ring valve technology increases production rates
Automation for tooling and dies to ensure fast changeovers
Precise slide guiding and rigid press frame
Uniform control concept
User-friendly operation and efficient fault diagnostics
Fast start-up of new die sets
Automatic edge-trimming machine - ø 14 - 50 mm | RS 50
Description
Schuler edge lettering and rimming machine RS 50 permit both edge rimming and edge engraving for coin blanks in diameters of 14...
Schuler edge lettering and rimming machine RS 50 permit both edge rimming and edge engraving for coin blanks in diameters of 14...
Automatic edge-trimming machine - ø 14 - 50 mm | RS 50
Description
Schuler edge lettering and rimming machine RS 50 permit both edge rimming and edge engraving for coin blanks in diameters of 14 to 50 mm. As standard equipment, feeding of the machine is full automated by inclined conveyor and feed drum. Manual feeding is also available as an option. This ensures an especially gentle handling for processing, for example, precious metal blanks.
Your advantages
Proven technology for the highest levels of operational reliability
Short changeover times and ease of adjustment
High production rates
Schuler edge lettering and rimming machine RS 50 permit both edge rimming and edge engraving for coin blanks in diameters of 14 to 50 mm. As standard equipment, feeding of the machine is full automated by inclined conveyor and feed drum. Manual feeding is also available as an option. This ensures an especially gentle handling for processing, for example, precious metal blanks.
Your advantages
Proven technology for the highest levels of operational reliability
Short changeover times and ease of adjustment
High production rates
Edge-trimming machine - ø 14 - 50 mm | ST 50 S
Description
Coin blanks in diameters from 14 to 50 mm can be processed on the model ST 50 S for edge rimming. Since two feed...
Coin blanks in diameters from 14 to 50 mm can be processed on the model ST 50 S for edge rimming. Since two feed...
Edge-trimming machine - ø 14 - 50 mm | ST 50 S
Description
Coin blanks in diameters from 14 to 50 mm can be processed on the model ST 50 S for edge rimming. Since two feed drums are used the production output rates are especially high. For example, the processing rate for coin blanks with a diameter of 14 mm is 600,000 blanks per hour while the rate for a 50 mm blank is 225,000 pph.
Your advantages
High level of operational reliability and long service life
Simple changeovers to other denominations
Cost-effective manufacturing
Coin blanks in diameters from 14 to 50 mm can be processed on the model ST 50 S for edge rimming. Since two feed drums are used the production output rates are especially high. For example, the processing rate for coin blanks with a diameter of 14 mm is 600,000 blanks per hour while the rate for a 50 mm blank is 225,000 pph.
Your advantages
High level of operational reliability and long service life
Simple changeovers to other denominations
Cost-effective manufacturing
Edge-trimming machine - max. 2 150 mm
All products manufactured on the blank cutting line require using the appropriate coil width. The edge trimming equipment by Schuler is a really advanced...
Edge-trimming machine - max. 2 150 mm
All products manufactured on the blank cutting line require using the appropriate coil width. The edge trimming equipment by Schuler is a really advanced one and makes it possible to reduce the number of coil sizes, as well as to produce a number of coil widths from the same standard coil.
Next, this equipment is able to trim both sides of the strip in order to achieve the desired width. The created scrap may be coiled up or chopped again, depending on the type of application running, while Schuler offers edge strip choppers, recoilers and coilers for this purpose.
Next, this equipment is able to trim both sides of the strip in order to achieve the desired width. The created scrap may be coiled up or chopped again, depending on the type of application running, while Schuler offers edge strip choppers, recoilers and coilers for this purpose.
Forming press / fine-blanking / hydraulic - 3 200 - 14 000 kN
AG Schuler has worked in cooperation with Feintool, a Swiss company, for the development of this fineblanking press, for which the manufacturers have worked over 30 years....
Forming press / fine-blanking / hydraulic - 3 200 - 14 000 kN
AG Schuler has worked in cooperation with Feintool, a Swiss company, for the development of this fineblanking press, for which the manufacturers have worked over 30 years. The presses are especially designed for coining, bending and forming complex fineblanking parts, with a capacity between 3,200 and 13,000kN.
In addition to this, the presses also allow processing materials with a thickness of up to 16mm. They are noted for extreme precision of the slide guiding over the entire width and length. Other features that users will enjoy include support for special tools that neutralize and absorb forces, as well as the ability to adjust the stroke's height.
In addition to this, the presses also allow processing materials with a thickness of up to 16mm. They are noted for extreme precision of the slide guiding over the entire width and length. Other features that users will enjoy include support for special tools that neutralize and absorb forces, as well as the ability to adjust the stroke's height.
Mold carrier - CFT series
KraussMaffeis CFT series are suitable for use in tilting purposes. These mold carriers contain different quick closing movements and high platen parallelism. This equipment features an easy accessibility...
Mold carrier - CFT series
KraussMaffeis CFT series are suitable for use in tilting purposes. These mold carriers contain different quick closing movements and high platen parallelism. This equipment features an easy accessibility mode allowing maximum flexibility for operation and automation. The CFT series are also equipped with clamping force and clamping-force distribution feature.
The tools strength-optimized frame structure secures an optimal force flow when closing the mold halves. The minimal warpage of the mold fixing platens allows non-inherently rigid molds to be used. In addition, KraussMaffei provide the CFT series with proportional hydraulics as standard, with a combination of process-optimized kinematics that assure a smooth and shock-free sequence of movements.
The tools strength-optimized frame structure secures an optimal force flow when closing the mold halves. The minimal warpage of the mold fixing platens allows non-inherently rigid molds to be used. In addition, KraussMaffei provide the CFT series with proportional hydraulics as standard, with a combination of process-optimized kinematics that assure a smooth and shock-free sequence of movements.
Mold carrier - max. 10 000 kN | SFT series
The SFT series is manufactured by KraussMaffei, and is a mold carrier that is ideal for use with different kinds of elements, and processes as it has peak holding forces and rapid traversing...
Mold carrier - max. 10 000 kN | SFT series
The SFT series is manufactured by KraussMaffei, and is a mold carrier that is ideal for use with different kinds of elements, and processes as it has peak holding forces and rapid traversing times. It is suitable for use in the automotive industry. It also has a high level of positioning precision and versatility as the series utilizes the four-column concept, thus enables it to hold massive molds that is used to make bumpers, spoilers, bodywork components.
The SFT series is integrated with hydraulic locking cylinders to deliver a clamping force of up to 10,000 kN. It also incorporates differential cylinders which guarantees short cycle times and optimum speeds. The design concepts ensures and adequate power flow and high degree of stiffness.
The SFT series is integrated with hydraulic locking cylinders to deliver a clamping force of up to 10,000 kN. It also incorporates differential cylinders which guarantees short cycle times and optimum speeds. The design concepts ensures and adequate power flow and high degree of stiffness.
Mold carrier - e-drive series
Electric mold carriers in KraussMaffeis e-drive series are designed using standardized modules. A fully electric drive concept was also used in the design of the instruments. This setup leads to low...
Mold carrier - e-drive series
Electric mold carriers in KraussMaffeis e-drive series are designed using standardized modules. A fully electric drive concept was also used in the design of the instruments. This setup leads to low investment costs and reduced delivery times, at the same time allowing short assembly and commissioning times. The series is also flexible and easy to handle because users can configure the movements and functions of the mold carriers and molds on the control cabinet.
The e-drive models are powered by the electric drive units. Since power is only consumed when the mold carriers are moving, little noise is produced and little energy is used up. Through the pneumatic clamp force property, the carriers in the series work well in back-foaming instrument panels.
The e-drive models are powered by the electric drive units. Since power is only consumed when the mold carriers are moving, little noise is produced and little energy is used up. Through the pneumatic clamp force property, the carriers in the series work well in back-foaming instrument panels.
Mold carrier - WinCap series
Krauss Maffeis WinCap Series of electric mold carriers are generally utilized for window encapsulation applications. Their clamping forces are pneumatically produced over entire mold fixing areas, while their...
Mold carrier - WinCap series
Krauss Maffeis WinCap Series of electric mold carriers are generally utilized for window encapsulation applications. Their clamping forces are pneumatically produced over entire mold fixing areas, while their overall systems move in parallel to guarantee more immediate traversing times. These devices showcase user-intuitive designs, with each models low and upper halves tilted. They sport integrated lift frames with 3 set positions to that hold varying mold heights, and a wide selection of added units that have been specifically engineered according to various mold features. Magnetic clamping platen mechanisms are also showcased by these carriers.
Model configurations of the WinCap Electric Mold Carriers can be switched from the front and back. They are available in a range of sizes and specific designs.
Model configurations of the WinCap Electric Mold Carriers can be switched from the front and back. They are available in a range of sizes and specific designs.
Dent puller - GYSPOT 2700
The GYSPOT 2700, with its 2600A maximum output is the ideal product for dent pulling...
Dent puller - GYSPOT 2700
The GYSPOT 2700, with its 2600A maximum output is the ideal product for dent pulling and straightening of low thickness car body elements (bonnet, door, roof panel etc.) The product is multifunctional, and effective for many applications. With its low power consumption, it can work on a simple 230V power supply
Dent puller - GYSPOT ALU E FV
The GYSPOT ALU E FV is designed specifically to perform dent pulling on ALUMINIUM. Using M4 studs, this device allows eliminating the bump and impacts (door panel, hood, ...) without stripping.
Dent puller - GYSPOT COMBI 230 E PRO
The Gyspot Combi 230 E Pro is a two-in-one dent pulling machine. It operates on both steel...
Dent puller - GYSPOT COMBI 230 E PRO
The Gyspot Combi 230 E Pro is a two-in-one dent pulling machine. It operates on both steel and aluminum car bodies.
The steel puller allows the user to configure two parameters: the output power and the tool used for the process. The aluminum dent features a microprocessor control and digital display which enables stud detection.
The steel puller allows the user to configure two parameters: the output power and the tool used for the process. The aluminum dent features a microprocessor control and digital display which enables stud detection.
Dent puller - GYSPOT 2600
The Gyspot 2600 features a 2600 A maximum output current. It is designed for dent...
Dent puller - GYSPOT 2600
The Gyspot 2600 features a 2600 A maximum output current. It is designed for dent pulling and straightening of low thickness car body elements, such as the hood.
Three modes are available within the model: the stars and washers welding mode, the wavy wire welding mode, and lastly, the contact shrinking mode.
Three modes are available within the model: the stars and washers welding mode, the wavy wire welding mode, and lastly, the contact shrinking mode.
Dent puller - GYSPOT 3902
The Gyspot 3902 model is manufactured by GYS, and is a dent pulling machine that...
Dent puller - GYSPOT 3902
The Gyspot 3902 model is manufactured by GYS, and is a dent pulling machine that has a voltage rating of 230 V, which consumes power at 3800 A. It is highly suitable for all steel straightening and dent pulling applications, which is easy to utilized due to an automatic gun and user-friendly control panel.