+7 (812) 645-08-06
Standard parts for mold making: Sprue nozzles
select brand
Injection nozzle / for injection presses
The injection nozzles for chlorine are appropriately combined fittings via which the chlorine...
Injection nozzle / for injection presses
The injection nozzles for chlorine are appropriately combined fittings via which the chlorine solution (hypochloric acid) supplied by the full-vacuum chlorinators is introduced into the water to be treated. The injection nozzle assembly comprises an injection pipe which is screwed into the water pipe, a shutoff valve and a non-return valve.
Valve gating system - E-Drive®
E Drive is the latest electric valve - gating solution that is commercially effective. It is designed for precision molding and multi cavitation applications inside oil free - environments and clean room. Valve pin - plate concept of the device makes use of the whole...
Valve gating system - E-Drive®
E Drive is the latest electric valve - gating solution that is commercially effective. It is designed for precision molding and multi cavitation applications inside oil free - environments and clean room. Valve pin - plate concept of the device makes use of the whole capabilities included in servo technology without compromising the force or speed of the device. Power of the servo motor is transmitted via a timing belt and two - ball screws to the valve - pin plate which can produce accurate linear motion for opening and closing gates. It also has E - drive controller that can be easily used and is capable of providing complete motion control and accurate set-up. Servo feedback - control along with absolute - position encoder makes it unnecessary for readjusting the pin position and also can provide correct position. These are designed to suit the molds with multiple cavity. It is featured with shorter pin close and open times and also with navigation that can be easily controlled. It is ideal to be used with pico, centi and femto nozzles.
Hot runner nozzle - Accu-Line™
The Accu-Line single nozzle system is a mold master that features a durable structure designed for rigorous site application and life cycle testing. It is best known for its heat profile and optimized...
Hot runner nozzle - Accu-Line™
The Accu-Line single nozzle system is a mold master that features a durable structure designed for rigorous site application and life cycle testing. It is best known for its heat profile and optimized gate durability that produce better part quality. The actuator unit is completely unified within the stationary machine platen which minimizes stack height and molding backing plate material up to 2/3s. Furthermore, its in-line design eradicates any mechanical problems with off-center loading valve. Its brushings observe the same design principles as the Master-Series valve gating systems which secures leak protection and increased availability.
Typical applications of this tool include packaging, teltronics, medical equipments and others.
Typical applications of this tool include packaging, teltronics, medical equipments and others.
Valve gating system - Accu-Valve
The Accu-Valve from Mold Masters is a cylindrical valve gating system typically used on specific applications...
Valve gating system - Accu-Valve
The Accu-Valve from Mold Masters is a cylindrical valve gating system typically used on specific applications...
Hot runner nozzle - Femto-Lite™
Femto-Lite, an 11 mm wide hot runner nozzle is used in a variety of applications like small closures, flip-top caps, personal care and multi-material/multi-color products. The product has 19 mm pitch and a flange to...
Hot runner nozzle - Femto-Lite™
Femto-Lite, an 11 mm wide hot runner nozzle is used in a variety of applications like small closures, flip-top caps, personal care and multi-material/multi-color products. The product has 19 mm pitch and a flange to tip heat profile, making it ideal for thermoplastic resins. It is manufactured for users looking for gating and tight pitch designs. The device delivers a highly reliable valve gate solution for different kinds of molds. For the very small valve gate, complete with a large bore and reduced pressure drop, you have 12mm gate access and 6mm flow channel. The flange and pin of 2.5mm is extremely strong and fitted with valve gate seals. The nozzle length varies from 73 to 163mm. The nozzle is ideal for close gate-to-gate spacing, thanks to its 3.5mm runner diameter and 12mm well bore. The tip and sprue gates offer five gating options.
Hot runner nozzle - Master-series®
The Master- Series from Mold- Masters is engineered with an accurate pneumatic or hydraulic actuator gate system that is capable of quality sequential part injection. These...
Hot runner nozzle - Master-series®
The Master- Series from Mold- Masters is engineered with an accurate pneumatic or hydraulic actuator gate system that is capable of quality sequential part injection. These hot runners are equipped with a tested, pre- wired and assembled board that is capable of precise heating.
Using CIC Technology, these hot runners are capable of handling productions with runner sizes up to 18 mm, shots up to 3,500 g. It is designed with nozzles that are 900 mm in length and 16 mm in width making it ideal for a wide variety of applications that caters to the needs of the user. It also has an available option for individual servo valve gate control and pin position indicators.
Using CIC Technology, these hot runners are capable of handling productions with runner sizes up to 18 mm, shots up to 3,500 g. It is designed with nozzles that are 900 mm in length and 16 mm in width making it ideal for a wide variety of applications that caters to the needs of the user. It also has an available option for individual servo valve gate control and pin position indicators.
Hot runner nozzle - Z3210 series
The H7001 series of cold runner components has various models.
Z201 has spru brushng, an Fe-CuNi thermocouple and works at 230 V AC. Type J Z101 works at 230 V AC and has a...
Z201 has spru brushng, an Fe-CuNi thermocouple and works at 230 V AC. Type J Z101 works at 230 V AC and has a...
Hot runner nozzle - Z3210 series
The H7001 series of cold runner components has various models.
Z201 has spru brushng, an Fe-CuNi thermocouple and works at 230 V AC. Type J Z101 works at 230 V AC and has a built-in Fe-CuNi thermocouple for processing thermoplastics. Z101G works at 230 V AC, has an Fe-CuNi thermocouple and is used for pin-pointing gating without any circular marking.
The design is similar to types Z101/...Z101R which work at 230 V AC, have an Fe-CuNi thermocouple and have a nozzle tip which can be shaped as required. These are similar to types Z101/...Z103 which work at 230 V AC, have an Fe-CuNi thermocouple and are used for gating onto the subrunner. This is also suitable for Z107 and similar in design to Z101/...Z3210.
Z201 has spru brushng, an Fe-CuNi thermocouple and works at 230 V AC. Type J Z101 works at 230 V AC and has a built-in Fe-CuNi thermocouple for processing thermoplastics. Z101G works at 230 V AC, has an Fe-CuNi thermocouple and is used for pin-pointing gating without any circular marking.
The design is similar to types Z101/...Z101R which work at 230 V AC, have an Fe-CuNi thermocouple and have a nozzle tip which can be shaped as required. These are similar to types Z101/...Z103 which work at 230 V AC, have an Fe-CuNi thermocouple and are used for gating onto the subrunner. This is also suitable for Z107 and similar in design to Z101/...Z3210.