+7 (812) 645-08-06
Standard parts for mold making: Sprue nozzles
select brand
Needle valve single nozzle
The needle valve single nozzle is a unit manufactured by HRS Flow. It is screws on various systems...
Needle valve single nozzle
The needle valve single nozzle is a unit manufactured by HRS Flow. It is screws on various systems such as point of injection systems.
It is applicable on areas of application such as polymers where molding cycle is reduced.
It has a uniform temperature profile along the entire length of the nozzle and it has high mechanical strength of the base.
It is applicable on areas of application such as polymers where molding cycle is reduced.
It has a uniform temperature profile along the entire length of the nozzle and it has high mechanical strength of the base.
Hot runner single nozzle
The Hot runner single nozzle, manufactured by HRSflow®, is utilized as a single valve...
Hot runner single nozzle
The Hot runner single nozzle, manufactured by HRSflow®, is utilized as a single valve...
Hot runner nozzle - MT Standard
The MT - Multitech Standard is considered as the most commonly used device which has...
Hot runner nozzle - MT Standard
The MT - Multitech Standard is considered as the most commonly used device which has the ability to function in a wide variety of applications and tasks. It consists of 3 nozzle sizes including the MT22, MT29 and MT39. The MT22 is built with an integral channel feature while the external unit is used in the MT29 and MT39 models.
Hot runner nozzle - MTF - Multitech Fast
The Multitech Fast product line is ideally used in dealing with applications that...
Hot runner nozzle - MTF - Multitech Fast
The Multitech Fast product line is ideally used in dealing with applications that are concerned with operating at fast cycle times below 8 seconds. This unit allows operators to deal with such processes without compromising the quality of the molded product. It is also engineered to provide fast color changes.
Hot runner nozzle - MTV - Multitech Valve Gate
The MTV - Multitech Valve Gate manufactured by HRS flow is a hot runner...
Hot runner nozzle - MTV - Multitech Valve Gate
The MTV - Multitech Valve Gate manufactured by HRS flow is a hot runner nozzle which is designed for all types of applications. This may includes operation coming from medical up to technical fields. It comes with a con injector and a pneumatic pin that is located on its plate.
Sprue nozzle for multiple injection
More recent technologies for the more environmentally compatible use of large engines include gas and dual-fuel operation. The internal gas mixture formation from gas injection at 250 bar in combination with a diesel oil pilot...
Sprue nozzle for multiple injection
More recent technologies for the more environmentally compatible use of large engines include gas and dual-fuel operation. The internal gas mixture formation from gas injection at 250 bar in combination with a diesel oil pilot injection gives the high-pressure gas engine a high specific cylinder output. Full performance can alternatively be obtained by liquid fuel operation. This process is made possible by injection systems using the L'Orange’s unique multi-needle nozzle. Dual-fuel engines working with external gas mixture formation, according to the Otto principle, are more flexible in terms of fuel utilisation and result in even lower emissions. This type of injection is used in mobile applications (e. g. LNG tanker) and power plants with a changing gas supply. The end-user can choose to run on more economical, eco-friendly gas, alternatively to change over to liquid fuel during operation
Injection nozzle / for injection presses - DN series
Double sealing for plastic material (leakproof).
Easier use and maintenance.
Easier machined nozzle seat.
Easier use and maintenance.
Easier machined nozzle seat.
Injection nozzle / for injection presses - F series
The thermocouple is positioned close to the tip zone for a better
detection...
detection...
Injection nozzle / for injection presses - F series
The thermocouple is positioned close to the tip zone for a better
detection of the temperature of injected plastic material.
• Plastic material sealing is located close to the tip zone to reduce
the material stagnation.
• Available also screwed nozzle solution.
detection of the temperature of injected plastic material.
• Plastic material sealing is located close to the tip zone to reduce
the material stagnation.
• Available also screwed nozzle solution.
Injection nozzle / for injection presses - F1, FM-1 series
Minimized injection point.
• Suitable for moulding plastic materials which leave threads.
• Heater cable exit position is adjustable (FM-1).
• Suitable for moulding plastic materials which leave threads.
• Heater cable exit position is adjustable (FM-1).
Injection nozzle / for injection presses - F1B, FM-1B series
Internal part injection.
• Suitable for fast cycle requirements.
• Heater cable exit position is adjustable (FM-1B).
• Suitable for fast cycle requirements.
• Heater cable exit position is adjustable (FM-1B).
Injection nozzle / for injection presses - F2, F2P series
Injection point visible on the part depending on the injection...
Injection nozzle / for injection presses - F2, F2P series
Injection point visible on the part depending on the injection hole
diameter.
• Suitable for injection on sprue or for thick wall parts (over 4 mm).
• Injection point control at restart of the moulding cycle (F2P).
diameter.
• Suitable for injection on sprue or for thick wall parts (over 4 mm).
• Injection point control at restart of the moulding cycle (F2P).