+7 (812) 645-08-06
Cast film extrusion lines
select brand
Cast film coextrusion line
The Cast Film Co-Extrusion Line allows simulation on all types of combinations,...
Cast film coextrusion line
The Cast Film Co-Extrusion Line allows simulation on all types of combinations, and processes in producing multi-layer films. The design of the extruder, adapter, mobile die stand, and the electric controls provide the flexibility required on the tasks. The machine uses die systems. It has a high level of safeness.
Thermoforming film extrusion line / cast film - max. 1 500 kg/h | ThermoFlex
Breyer excels in the crystal clear thermoplastics industry, and has specialized in the extrusion of premium film and sheet qualities. System operators enjoy the special updates which permit them to increase production...
Thermoforming film extrusion line / cast film - max. 1 500 kg/h | ThermoFlex
Breyer excels in the crystal clear thermoplastics industry, and has specialized in the extrusion of premium film and sheet qualities. System operators enjoy the special updates which permit them to increase production and running more quickly. Using Breyer products enable users to quickly and safely increase the production performance.
The ThermoFlex from Breyer Extrusion Lines is suitable for use in thermo-forming film. The tool is capable of rapidly reproducing the modification of film thickness. The device offers a reproducible calender gap positioning and collision alarm die. It also exhibits a wide range of applications, such as safe packing out of PET film, individual packing design and termformed blistered packing. This equipment provides a mart production control that recognizes when the extruder is not running smoothly due to material
The ThermoFlex from Breyer Extrusion Lines is suitable for use in thermo-forming film. The tool is capable of rapidly reproducing the modification of film thickness. The device offers a reproducible calender gap positioning and collision alarm die. It also exhibits a wide range of applications, such as safe packing out of PET film, individual packing design and termformed blistered packing. This equipment provides a mart production control that recognizes when the extruder is not running smoothly due to material
Optical film extrusion line / cast film - max. 700 kg/h | OptiFlex
The Film for optical film extrusion line/cast film is capable of producing a highly-flexible operation. Both sides of this machine are polished, and it is also composed of a mat...
Optical film extrusion line / cast film - max. 700 kg/h | OptiFlex
The Film for optical film extrusion line/cast film is capable of producing a highly-flexible operation. Both sides of this machine are polished, and it is also composed of a mat and a structured film, with optical properties. The product can produce an ultra-thin, low-tension films with high optical quality. It is made based from superior know-how gained from years of utilizing extrusion technology. The manufacturer also utilizes special calendar techniques where tensions are kept to their minimum. The precise and reproducible adjustment of the roll gap, combined with the high stability of the calendar rolls are considered as prerequisite for the ideal production of minimum film thickness.
EVA film extrusion line / cast film / for photovoltaic modules - max. 850 kg/h | CellProtect
The CellProtect is a high quality extrusion unit meant to be used for producing low shrinkage encapsulation...
EVA film extrusion line / cast film / for photovoltaic modules - max. 850 kg/h | CellProtect
The CellProtect is a high quality extrusion unit meant to be used for producing low shrinkage encapsulation films for several solar modules. It provides a fully equipped line of high quality devices and services including the dosing system, extruder, die, process unit and more. It has the ability to enable a higher speed capability and a higher output than the conventional and other competing units.
Cast film extrusion line - max. 90 mm | SE series
Machine with 65mm / 75mm / 90mm main extruder are offered in combination with one or two 40mm / 50mm co-extruders. The extruders are powered by AC motors with frequency drives. The motor and the extruder gearbox are coupled by V-belt giving in smoother operation. The thrust bearing is located inside the gearbox for best lubrication and heat dissipation. The Control Panel for the entire line is free...
Cast film extrusion line - max. 90 mm | SE series
Machine with 65mm / 75mm / 90mm main extruder are offered in combination with one or two 40mm / 50mm co-extruders. The extruders are powered by AC motors with frequency drives. The motor and the extruder gearbox are coupled by V-belt giving in smoother operation. The thrust bearing is located inside the gearbox for best lubrication and heat dissipation. The Control Panel for the entire line is free standing.
Screw:
Several different screw designs are offered. The L/D ratio is 1:30 for all screws and 1:32 for vacuum vented barrels for removing volatile constituents of material. Multipurpose screw design for HIPS, ABS and PP is also offered.
Barrel Heaters:
The barrel is heated using ceramic electric band heaters controlled by closed loop temperature controllers.
T-Die:
The die is coat hanger type of die with horizontal split line. It has adjustable and interchangeable lips for different ranges of sheet thickness. Dies have a flexible lip or choker bar. The sheet width can be adjusted on either side by deckling if needed.
Polishing Roller Stack:
The surface of plastic melt leaving the die is smoothened and cooled by rollers on passing through a 3 roll vertical polishing stack. The top and bottom rollers of the polishing stack are pneumatically movable while the center roller is fixed The surface of roller is hard chrome plated and highly polished to minor finish. The rollers are temperature regulated. The rollers are double-shelled type with spiral circulating channels. All the three rollers have separate temperature control circuits.
Screw:
Several different screw designs are offered. The L/D ratio is 1:30 for all screws and 1:32 for vacuum vented barrels for removing volatile constituents of material. Multipurpose screw design for HIPS, ABS and PP is also offered.
Barrel Heaters:
The barrel is heated using ceramic electric band heaters controlled by closed loop temperature controllers.
T-Die:
The die is coat hanger type of die with horizontal split line. It has adjustable and interchangeable lips for different ranges of sheet thickness. Dies have a flexible lip or choker bar. The sheet width can be adjusted on either side by deckling if needed.
Polishing Roller Stack:
The surface of plastic melt leaving the die is smoothened and cooled by rollers on passing through a 3 roll vertical polishing stack. The top and bottom rollers of the polishing stack are pneumatically movable while the center roller is fixed The surface of roller is hard chrome plated and highly polished to minor finish. The rollers are temperature regulated. The rollers are double-shelled type with spiral circulating channels. All the three rollers have separate temperature control circuits.