+7 (812) 645-08-06
Mills
select brand
Louvered mill - 200 - 450 mm | RSP20 series
Reduced energy usage
High quality regrind
Easy cleaning and maintenance operations
Integrated soundproofing
High quality regrind
Easy cleaning and maintenance operations
Integrated soundproofing
Fine cutting mill - SecoMy®
Cutting Mills of the type SecoMy® are high speed cutting mills with high-frequency cutting strokes for the fine-grinding of cuttable materials. Application areas include materials that must be finely ground by means...
Fine cutting mill - SecoMy®
Cutting Mills of the type SecoMy® are high speed cutting mills with high-frequency cutting strokes for the fine-grinding of cuttable materials. Application areas include materials that must be finely ground by means...
Fine cutting mill - SecoMy® S
Fine Cutting Mills of the type SecoMy® S are high speed cutting mills with high-frequency cutting strokes for the fine-grinding of cuttable materials. In contrast to classic cutting mills, final finenesses of up to 45 μm...
Fine cutting mill - SecoMy® S
Fine Cutting Mills of the type SecoMy® S are high speed cutting mills with high-frequency cutting strokes for the fine-grinding of cuttable materials. In contrast to classic cutting mills, final finenesses of up to 45 μm...
Steam jet mill - s-Jet®
This innovative steam jet mill is capable of fine grinding all kinds of dry products with any hardness and virtually no contamination.
Through this specialized milling...
Through this specialized milling...
Steam jet mill - s-Jet®
This innovative steam jet mill is capable of fine grinding all kinds of dry products with any hardness and virtually no contamination.
Through this specialized milling concept, product grinding is entirely autogenous. Steam jets alone create the grinding energy. No tool wear occurs!
An integrated dynamic air classifier in the housing can be infinitely adjusted to the desired fineness. This guarantees exact adjustment of the grinding parameters and reproducible product quality.
Even the hardest of products poses no problem for this machine. In addition, moist products can be ground and dried simultaneously without any additional pre-drying process for inlet.
Through this specialized milling concept, product grinding is entirely autogenous. Steam jets alone create the grinding energy. No tool wear occurs!
An integrated dynamic air classifier in the housing can be infinitely adjusted to the desired fineness. This guarantees exact adjustment of the grinding parameters and reproducible product quality.
Even the hardest of products poses no problem for this machine. In addition, moist products can be ground and dried simultaneously without any additional pre-drying process for inlet.
Steam jet mill / compact / laboratory - s-Jet® 25
The new s-Jet® 25 is a small and compact laboratory unit and the logical complement to the proven new stem jet mill s-Jet® series.
This System is a combination of spiral jet mill and integrated dynamic air classifier. High finenesses can be obtained with this mill, independent of the load in the air jets. During the development of this plant great care was taken to create...
This System is a combination of spiral jet mill and integrated dynamic air classifier. High finenesses can be obtained with this mill, independent of the load in the air jets. During the development of this plant great care was taken to create...
Steam jet mill / compact / laboratory - s-Jet® 25
The new s-Jet® 25 is a small and compact laboratory unit and the logical complement to the proven new stem jet mill s-Jet® series.
This System is a combination of spiral jet mill and integrated dynamic air classifier. High finenesses can be obtained with this mill, independent of the load in the air jets. During the development of this plant great care was taken to create...
This System is a combination of spiral jet mill and integrated dynamic air classifier. High finenesses can be obtained with this mill, independent of the load in the air jets. During the development of this plant great care was taken to create...
Knife mill / for cocoa nibs / fine cutting - System Tango®
The compact Tango® process plant, designed as a skid, provides an optimum precutting of cocoa nibs to a mass of a particle size smaller than 75 µm. Thanks to the efficient precutting process finest cocoa mass will be achieved...
Knife mill / for cocoa nibs / fine cutting - System Tango®
The compact Tango® process plant, designed as a skid, provides an optimum precutting of cocoa nibs to a mass of a particle size smaller than 75 µm. Thanks to the efficient precutting process finest cocoa mass will be achieved...
The pharmaceutical industry mill - 600 kg/h | RFG 150 DA
The RFG 150 DA by Alexanderwerk is a mill designed for pharmaceutical industry. For this specific...
The pharmaceutical industry mill - 600 kg/h | RFG 150 DA
The RFG 150 DA by Alexanderwerk is a mill designed for pharmaceutical industry. For this specific unit, it comes with a UM universal drive motor which has an integrated quick release coupling through its variety slip-on attachments. It can be used with grater / shredders, moist granulators or mixers. Also an option, it can have a wash-in-place design.
The pharmaceutical industry mill - max. 4 500 kg/h | RFG 250 D, 250 DL, 250 DDL
The RFG250 series rotor fine granulators features maximum throughputs of 1,500 kg/hr (type: D), 3,000 kg/hr (type DL) and 4,500 kg/hr (type DDL). These three versions provide a pre-set series...
The pharmaceutical industry mill - max. 4 500 kg/h | RFG 250 D, 250 DL, 250 DDL
The RFG250 series rotor fine granulators features maximum throughputs of 1,500 kg/hr (type: D), 3,000 kg/hr (type DL) and 4,500 kg/hr (type DDL). These three versions provide a pre-set series of dynamic equipments for pulverization and decreasing the volume of dry of slightly damp components.
The pulverization process using the rotor fine granulators involves automated powdering of the component for manufacturing fragments of a specific particle volume. Generally, the rotor fine pulverization process does not manufacture any excess-size fragment beyond the legal limit. On the other hand, this kind of volume depletion can lower the fine elements in the final product as rotor fine pulverization is a very smooth process.
The pulverization process using the rotor fine granulators involves automated powdering of the component for manufacturing fragments of a specific particle volume. Generally, the rotor fine pulverization process does not manufacture any excess-size fragment beyond the legal limit. On the other hand, this kind of volume depletion can lower the fine elements in the final product as rotor fine pulverization is a very smooth process.
Roller mill / for the chemical industry - max. 1 500 kg/h | PGS 165
The PGS 165 is manufactured by Alexanderwerk. This grating and shredding machine...
Roller mill / for the chemical industry - max. 1 500 kg/h | PGS 165
The PGS 165 is manufactured by Alexanderwerk. This grating and shredding machine is designed for inline installation, but can also work as s mobile unit. It has a cylinder diameter of 165 mm, and can produce throughput rates up to 1,000 kg/hr. Alexanderwerk's PGS 165 is made from stainless steel 1.4404.
Roller mill / for the chemical industry - max. 1 000 kg/h | PGS 165 A
The PGS 165 A by Alexanderwerk is a roller mill which is designed for chemical industry. For this...
Roller mill / for the chemical industry - max. 1 000 kg/h | PGS 165 A
The PGS 165 A by Alexanderwerk is a roller mill which is designed for chemical industry. For this specific unit, it can function as a detouchable unit which is suited for universal drive motor of the UM series. It comes with an integral drive coupling enabling it to do direct attachment of different process unit to the UM. Also, it can come different version for specific application.
Roller mill / for the chemical industry - max. 4 000 kg/h | PGS 300
The PGS 300 is a flexible grater/shredder which is manufactured by Alexanderwerk. The shredder can process material at a throughput rate between...
Roller mill / for the chemical industry - max. 4 000 kg/h | PGS 300
The PGS 300 is a flexible grater/shredder which is manufactured by Alexanderwerk. The shredder can process material at a throughput rate between 1,000 and 4,000 kg/hr depending on the material and the working cylinder.
The model is made of a stainless steel 1.4404 material. A gas-tight gearbox design is also included in the machine. This gearbox, which is a one-piece construction, is made from stainless steel.
Optional functions are also available, such as pharma execution, water-cooling of the drive shaft, and a Wash In Place (WIP) design.
The model is made of a stainless steel 1.4404 material. A gas-tight gearbox design is also included in the machine. This gearbox, which is a one-piece construction, is made from stainless steel.
Optional functions are also available, such as pharma execution, water-cooling of the drive shaft, and a Wash In Place (WIP) design.