+7 (812) 645-08-06
Other valves
select brand
Pneumatically-actuated valve / stainless steel - MaxAir series
This 2-way solenoid valve is pilot-acting. With a body constructed from stainless steel, and a stainless steel...
Pneumatically-actuated valve / stainless steel - MaxAir series
This 2-way solenoid valve is pilot-acting. With a body constructed from stainless steel, and a stainless steel stem and viton diaphragms, its valves are normally closed (NC) and are internally piloted. The solenoid valve is ideal for use with water, air, beverage dispensing, lightweight oil, most chemical liquids and non flammable liquid gases. For ease of electrical connection, the 30mm coil connects with many options.
Steam pressure regulator - max. 6 000 psig | 44-5800 series
The 44-5800 regulator provides advanced heat transfer technology, with a superior tolerance to high ambient temperatures and voltage spikes.
Applications for sampling systems, liquid petroleum...
Applications for sampling systems, liquid petroleum...
Steam pressure regulator - max. 6 000 psig | 44-5800 series
The 44-5800 regulator provides advanced heat transfer technology, with a superior tolerance to high ambient temperatures and voltage spikes.
Applications for sampling systems, liquid petroleum analyzer, and petrochemical/refinery analyzer.
Utilized worldwide for 90-125 VAC / 190-230 VAC, 50/60 Hz.
Features? 4-20 mA analog output for data acquisition and remote temperature monitoring and a single turn control dial. ATEX, CSA and IECEX Certification to T4 Rating. ? NACE MR0175/ISO 15156
LCD temperature display and panel mounting are both available as options. The option of a version with a heating capacity up to 400 watts is also available for applications requiring a faster response to flow variations.
?
Applications for sampling systems, liquid petroleum analyzer, and petrochemical/refinery analyzer.
Utilized worldwide for 90-125 VAC / 190-230 VAC, 50/60 Hz.
Features? 4-20 mA analog output for data acquisition and remote temperature monitoring and a single turn control dial. ATEX, CSA and IECEX Certification to T4 Rating. ? NACE MR0175/ISO 15156
LCD temperature display and panel mounting are both available as options. The option of a version with a heating capacity up to 400 watts is also available for applications requiring a faster response to flow variations.
?
Changeover valve - max. 3 000 psig | NA-4 series
The TESCOM NA-4 Series Changeover System is designed for continuous and interruption-free supply of carrier and calibration gases. It it is commonly used in petrochemical analyzer...
Changeover valve - max. 3 000 psig | NA-4 series
The TESCOM NA-4 Series Changeover System is designed for continuous and interruption-free supply of carrier and calibration gases. It it is commonly used in petrochemical analyzer sampling systems, medical gas delivery, and laboratories as well as welding gas applications. It can be provided standalone or as part of a full system with CGA connections, hoses, check valves, purge valves, pressure switches and alarms.
This unit can handle up to 16 cylinders and includes stainless steel regulators and valves, with a choice of the shut-off valve type and location. It can be equipped with a low pressure or high pressure line regulator and an optional remote mount annunciator.
This unit can handle up to 16 cylinders and includes stainless steel regulators and valves, with a choice of the shut-off valve type and location. It can be equipped with a low pressure or high pressure line regulator and an optional remote mount annunciator.
High-pressure valve - DN 10, PN 300
These high pressure valves are often used in laboratory gas supply lines, where...
High-pressure valve - DN 10, PN 300
These high pressure valves are often used in laboratory gas supply lines, where high purity is an imperative (5.0 purity gas applications).
The full metal design provides the purity. They are also used in systems with high flow rates. These valves are commonly used in panel solutions and main lines.
The full metal design provides the purity. They are also used in systems with high flow rates. These valves are commonly used in panel solutions and main lines.
Double block valve / drain - max. 10 000 psig | VK series
Providing control pressures of 6000 and 10,000 psig or 414 and 690 bar, the TESCOM VK Series are block and bleed manifold systems. These devices were created similar...
Double block valve / drain - max. 10 000 psig | VK series
Providing control pressures of 6000 and 10,000 psig or 414 and 690 bar, the TESCOM VK Series are block and bleed manifold systems. These devices were created similar to the VJ series that is also made by TESCOM. This machine was crafted for purging functions and not only has a greater cycle life, but also a reduced operating torque. Present on this device is a metallic built-in stop and the feature to additionally permit downstream pressures to bleed to zero. With this machine, repairing and constructing processes can be done on pressurized lines. There are several different material options from which to choose on this product.
Manually-operated valve / in-line - DN 16 ISO-KF - DN 40 ISO-KF
Pfeiffer Vacuum manually actuated inline valves, made of stainless steel housing...
Manually-operated valve / in-line - DN 16 ISO-KF - DN 40 ISO-KF
Pfeiffer Vacuum manually actuated inline valves, made of stainless steel housing material feature help in visually indicating open and closed positions. The valves have a service life of 10000 operating cycles.
The valves are available in 3 models - DVC 016 SX, DVC 025 SX, DVC 040 SX.
The valves are available in 3 models - DVC 016 SX, DVC 025 SX, DVC 040 SX.
Pneumatic valve / in-line - DN 16 ISO-KF - DN 40 ISO-KF
Inline normally closed pneumatically actuated valves have an integrated position indicator (PI) within the same...
Pneumatic valve / in-line - DN 16 ISO-KF - DN 40 ISO-KF
Inline normally closed pneumatically actuated valves have an integrated position indicator (PI) within the same housing.
Made of a very robust stainless steel housing with sealed bellows feed-through, they allow for up to 10 million operating cycles requiring minimum simple maintenance very efficiently. These valves does not get affected by contamination and are thus suitable for hardcore industrial applications.
Made of a very robust stainless steel housing with sealed bellows feed-through, they allow for up to 10 million operating cycles requiring minimum simple maintenance very efficiently. These valves does not get affected by contamination and are thus suitable for hardcore industrial applications.
Vent valve / manually-operated
These stainless steel venting valves are used for the manual venting of small...
Vent valve / manually-operated
These stainless steel venting valves are used for the manual venting of small vacuum systems. Made of high quality FKM (valve seal), these can be used for industrial applications that require repetitive cycles. The HA models with aluminum housing and the HX line with SS housing are manually actuated.