+7 (812) 645-08-06
Purifiers, desalinators, water softeners...
select brand
Reverse osmosis desalinator -
Babcock Wanson UK has designed a device used for the purification of water when the process has to have reduced levels of salts in water supplies. The demineralization becomes possible through the aid...
Reverse osmosis desalinator -
Babcock Wanson UK has designed a device used for the purification of water when the process has to have reduced levels of salts in water supplies. The demineralization becomes possible through the aid...
Demineralisation plant -
The Babcock Wanson introduces the new "HRW" process that can further purify feed water by demineralising with resin beds or reverse osmosis. It further eliminates the slats and silica using the...
Demineralisation plant -
The Babcock Wanson introduces the new "HRW" process that can further purify feed water by demineralising with resin beds or reverse osmosis. It further eliminates the slats and silica using the cationic and anionic resins (primary chain) along with the mixed beds (final polishing).
The counter-current regeneration offers various benefits related to the use of reproduction reagents and the improvement of the grade of water produced. Its key features include water production with reduced conductivity in a specific duration without any suspension phase. It achieves a water of consistent quality over the duration of the cycle.
Additionally, it is also characterized by a decrease in the size of service and waste water along with the decrease of regeneration cycle time.
The counter-current regeneration offers various benefits related to the use of reproduction reagents and the improvement of the grade of water produced. Its key features include water production with reduced conductivity in a specific duration without any suspension phase. It achieves a water of consistent quality over the duration of the cycle.
Additionally, it is also characterized by a decrease in the size of service and waste water along with the decrease of regeneration cycle time.
Water softener - 0.5 - 3 m³/h | Compact
The Berkoion™ Compact softeners comes with built-in brine tanks that consumes minimal space and can be installed easily. Its simplex, duplex...
Water softener - 0.5 - 3 m³/h | Compact
The Berkoion™ Compact softeners comes with built-in brine tanks that consumes minimal space and can be installed easily. Its simplex, duplex and quadruplex options provides consistent flow of the softened water. Its optimized hydraulic conditions minimize salt usage and provides low cost/l of treated water. Its automated time based regeneration reduces stress on the operators part. Its A series automatically regenerates after 4 days without use. It features comprehensive disinfection in the regeneration process and an electronic display for easy monitoring and operation.
Water softener - 1 - 17 m³/h | Classic Simplex
The BERKOION series of Water Softeners from VEOLIA employs strong materials. They provide...
Water softener - 1 - 17 m³/h | Classic Simplex
The BERKOION series of Water Softeners from VEOLIA employs strong materials. They provide easy and dependable operations that require less maintenance. It is volume or time regulated, and is capable of either semi or fully mechanized regeneration with less operator intervention. The series comes with the BERCORE moder with counter current regeneration.
Water softener - 1.4 - 17 m³/h | Classic Duplex
The Berkoion™ Classic Duplex softeners feature a duplex technology that ensures flow consistency of treated...
Water softener - 1.4 - 17 m³/h | Classic Duplex
The Berkoion™ Classic Duplex softeners feature a duplex technology that ensures flow consistency of treated water. They have a Bercore™ counter current reconstruction that decreases cost ratio of processed water. They also lessen salt utilization and waste. They also enhance the quality of treated water. These softeners offer a guaranteed system with materials that deliver effective, user-friendly, and dependable production.
Water softener - 2.7 - 80 m³/h | High Flow Duplex
Berkoion™ High Flow Duplex softeners are designed using materials that provide excellent operation, convenient maintenance,...
Water softener - 2.7 - 80 m³/h | High Flow Duplex
Berkoion™ High Flow Duplex softeners are designed using materials that provide excellent operation, convenient maintenance, and dependability.
These are equipped with several independent valves that decrease pressure loss up to 50%, a modernized controller with LCD display that incorporates a set of control options, automatic operation, and integration with centralized control systems. These softeners are engineered with duplex structure for spontaneous flow of treated water.
These are equipped with several independent valves that decrease pressure loss up to 50%, a modernized controller with LCD display that incorporates a set of control options, automatic operation, and integration with centralized control systems. These softeners are engineered with duplex structure for spontaneous flow of treated water.
Demineralisation plant - 0.25 - 4 m³/h | Duo Eclipse
The Duo Eclipse™ is a two-stage deionization system that delivers optimum performance in removing almost 98% of salts or dissolved solids in liquids.
It is...
It is...
Demineralisation plant - 0.25 - 4 m³/h | Duo Eclipse
The Duo Eclipse™ is a two-stage deionization system that delivers optimum performance in removing almost 98% of salts or dissolved solids in liquids.
It is equipped with an electronic interface with built-in indicators and a manual override for safe and easy operation as well as accurate and precise results. It is also fitted with high end circuitry that monitors the conductivity and an automatic regeneration, reducing operational cost. It requires no additional equipment for the operation of these equipment.
The Duo Eclipse™can be further optimized by integrating one or two of the available options that suits the specifications of an application.
It is equipped with an electronic interface with built-in indicators and a manual override for safe and easy operation as well as accurate and precise results. It is also fitted with high end circuitry that monitors the conductivity and an automatic regeneration, reducing operational cost. It requires no additional equipment for the operation of these equipment.
The Duo Eclipse™can be further optimized by integrating one or two of the available options that suits the specifications of an application.
Ultra-pure water purification unit for laboratories - 10 - 30 l/h | PURELAB Chorus 2/3
The PURELAB Chorus 3 RO model and Chorus 2 RO/DI model are designed for applications requiring general laboratory...
Ultra-pure water purification unit for laboratories - 10 - 30 l/h | PURELAB Chorus 2/3
The PURELAB Chorus 3 RO model and Chorus 2 RO/DI model are designed for applications requiring general laboratory grade water. They provide reliable solutions with customization to suit consumer requirements. Type II pure water is provided by the Chorus 2, direct from a portable supply of tap water. The Chorus 3 provides primary RO grade Type III water on demand with a broad flow rate range of up to 120 l/hour.
Ultra-pure water purification unit for laboratories - 7.5 - 15 l/h | PURELAB Option S-R 7-15
The PURELAB Option is suitable as a solution for general laboratory applications like general chemistry...
Ultra-pure water purification unit for laboratories - 7.5 - 15 l/h | PURELAB Option S-R 7-15
The PURELAB Option is suitable as a solution for general laboratory applications like general chemistry and electrochemistry. Aside from this, it can also be used in culturing tissue and cells. It has the ability to transport up to 15 lt/hr of Type II water through its unique system producing a reliable water quality. This water purifier features an authentication support and an easy to maintain equipment system.
Ultra-pure water purification unit for laboratories - 30 - 60 l/h | PURELAB Option S-R 30-60
Fitted to cater a broad selection of operations, PURELAB Option can provide type II water of up to 60 liters per hour and up to MΩ-cm...
Ultra-pure water purification unit for laboratories - 30 - 60 l/h | PURELAB Option S-R 30-60
Fitted to cater a broad selection of operations, PURELAB Option can provide type II water of up to 60 liters per hour and up to MΩ-cm for general laboratory use. It has an exceptional recirculating Type II system which ensures water quality at hand. Furthermore, this machine can be easily maintained and serviced with validation support. It is also a huge help for various applications such as feed to ultra pure water systems, reagent make up, buffer and media preparation, general chemistry, electrochemistry, tissue and cell culture.
Water purification unit for medical applications - 200 l/min | MEDICA-R 200
The MEDICA-R200 is a high performing large automated diagnostic analyzers that guarantees maximum output and provides detailed bacterial specification. This system provides...
Water purification unit for medical applications - 200 l/min | MEDICA-R 200
The MEDICA-R200 is a high performing large automated diagnostic analyzers that guarantees maximum output and provides detailed bacterial specification. This system provides CLRW standard (formally CLSI Type 1) pure water making it highly flexible and reliable. It is packed with key benefits such as ability to delivers 21 liters per minute of CLRW standard water, multifunction as it can feed multiple analyzers on a distribution loop and across several laboratories, a bypass loop for continuous supply of compliant water in emergency situations, low running and consumable costs and has single system application makes it easy to project plan and install.
Ultra-pure water purification unit for laboratories - 60 - 120 l/h | CENTRA-R 60-120
The CENTRA has revolutionized the way pure water is produced, stored and distributed. Instead of a traditionally engineered central lab system, comprising of an untidy grouping of components and pipework, a single integrated system...
Ultra-pure water purification unit for laboratories - 60 - 120 l/h | CENTRA-R 60-120
The CENTRA has revolutionized the way pure water is produced, stored and distributed. Instead of a traditionally engineered central lab system, comprising of an untidy grouping of components and pipework, a single integrated system box can be accessed.
The CENTRA-R60 and CENTRA-R120 are complete water purification, storage, control and distribution systems delivering up to 120 liters per hour of water which has been purified using reverse osmosis, UV photo-oxidization, and optional deionization.
It is has a dependable, constant supply of sterilized water using special access regulations, leak analyzer functions and full AV alarms with provisional construction management system (BMS) attachment.
Additionally, it features a bacterial criteria of <1CFU/ml, sustained with an instant and smooth disinfection program for the RO diaphragm and dispensation loop.
The CENTRA-R60 and CENTRA-R120 are complete water purification, storage, control and distribution systems delivering up to 120 liters per hour of water which has been purified using reverse osmosis, UV photo-oxidization, and optional deionization.
It is has a dependable, constant supply of sterilized water using special access regulations, leak analyzer functions and full AV alarms with provisional construction management system (BMS) attachment.
Additionally, it features a bacterial criteria of <1CFU/ml, sustained with an instant and smooth disinfection program for the RO diaphragm and dispensation loop.