+7 (812) 645-08-06
Laser beam profilers
select brand
Laser beam profiler camera
The PHOTONIS Charged Particle Beam Profiler merges a PHOTONIS Advanced Performance sensor with a built in camera. The camera offers a monochrome image output with high resolution for measurement of charged components. The APD which...
Laser beam profiler camera
The PHOTONIS Charged Particle Beam Profiler merges a PHOTONIS Advanced Performance sensor with a built in camera. The camera offers a monochrome image output with high resolution for measurement of charged components. The APD which follows the camera can be regulated by specifying an exclusive micro-channel plate, varying on the operation to be captured. The MCP is then incorporate in the APD and merged with the camera to form a fully operational turnkey system which is well-suited for Charged Particle Beam Profiling.
The Micro-channel plate will be indicated at time of order depending on the utilization. The sturdy camera offers high-resolution monochrome images which outputs 380 TV lines in EIA format. The following frame-capturing imaging package is a half-size PCI slot with four combined video inputs. The software interface can capture frames in various formats like TIFF, BMP or TARGA.
The Micro-channel plate will be indicated at time of order depending on the utilization. The sturdy camera offers high-resolution monochrome images which outputs 380 TV lines in EIA format. The following frame-capturing imaging package is a half-size PCI slot with four combined video inputs. The software interface can capture frames in various formats like TIFF, BMP or TARGA.
Laser beam aligner
The MAT/MAR is a laser beam aligner. Its MAT active device transmitter modules enable the straight coupling into fibers terminated with E-2000 connectors....
Laser beam aligner
The MAT/MAR is a laser beam aligner. Its MAT active device transmitter modules enable the straight coupling into fibers terminated with E-2000 connectors. The MAR receivers work the reverse receiving function. These types are specifically constructed to feature a high degree of optical stability over different environment and mechanical-stress conditions. It is designed with robust construction that enables reliable and repeatable operation over 1000cycles of mate/demate.
Both these types also offer positive latching mechanism, spring-loaded shutters for eye-safety and compact footprint.
Both these types also offer positive latching mechanism, spring-loaded shutters for eye-safety and compact footprint.
Photodiode receiver -
The balanced photodiode receiver, manufactured by Sacher Lasertechnik, is a fast optical...
Photodiode receiver -
The balanced photodiode receiver, manufactured by Sacher Lasertechnik, is a fast optical detector. The detector consist of two photodiodes with a different amplifier. The device compares two correlated optical signals. The result of this enables the device to eliminate all noise from a spectroscopic analysis. The detector has a good signal response.
Photodiode receiver - 20 MHz
The photodiode receiver, manufactured by Sacher Lasertechnik Group, is a quick optical detector....
Photodiode receiver - 20 MHz
The photodiode receiver, manufactured by Sacher Lasertechnik Group, is a quick optical detector. It has a quick photodiode along with a trans-impedance or voltage-to-current amplifier.
The device is made to detect small amplitude power changes of laser radiation. It works on wavelengths 400nm - 1100nm for Si Photo Diode and 1000nm - 1800nm for GaAs Photo Diode.
The device is made to detect small amplitude power changes of laser radiation. It works on wavelengths 400nm - 1100nm for Si Photo Diode and 1000nm - 1800nm for GaAs Photo Diode.