+7 (812) 645-08-06
Signal conditioners
select brand
Signal converter
This item is suitable for sensor and absolute encoders connection with the use of a SSI interface, being able...
Signal converter
This item is suitable for sensor and absolute encoders connection with the use of a SSI interface, being able to convert both SSI and serial data into a parallel format. In addition, the parallel output of 25 bit and the RS232 interface is suitable for serial readouts of sensor information.
Finally, the slave or SSI:Master operation modes are both possible, which increases the compatibility of this item.
Finally, the slave or SSI:Master operation modes are both possible, which increases the compatibility of this item.
Signal converter - 0 - 10 V, 4 - 20 mA | KF series
The KF series of signal converters is designed to receive signals from a variety...
Signal converter - 0 - 10 V, 4 - 20 mA | KF series
The KF series of signal converters is designed to receive signals from a variety of measurement instruments normally located in high hazard environments such as temperature sensors and potentiometers as well as load cells. These signals are then processed and transformed into 0/4 to 20 mA or 0/2 to 10 V signals.
Signal conditioner - max. 5 V, max. 20 mA | K series
Practicality will always be one of the top considerations in buying products. Pepperl-Fuchs has now come up with the K-System -...
Signal conditioner - max. 5 V, max. 20 mA | K series
Practicality will always be one of the top considerations in buying products. Pepperl-Fuchs has now come up with the K-System - the number one choice in signal conditioner products.
K-System is an economical and trusted product used in the transmission between the control system and field devices. The whole system is identified by application-oriented solutions, whether large scale system integration or a single isolating module. Modules are DIN-Rail mounted and powered by the Power Rail.
K-System is an economical and trusted product used in the transmission between the control system and field devices. The whole system is identified by application-oriented solutions, whether large scale system integration or a single isolating module. Modules are DIN-Rail mounted and powered by the Power Rail.
Signal converter - max. 30 VDC | KF series
Pepperl-Fuchs K-system Signal Converters are ideal for converting signals received from instruments in hazardous...
Signal converter - max. 30 VDC | KF series
Pepperl-Fuchs K-system Signal Converters are ideal for converting signals received from instruments in hazardous areas (temperature sensors, potentiometers or load cells). The converters condition the signals into easier interpreted 0/4...20mA or 02...10V signals. The K-system signal converters are all equipped with system features of the K-system isolated barriers, including the power supply and collective error message via Power Rail.
Multiplexer - max. 32 VDC, 100 mA | KFD0 series
The Pepperl+Fuchs K-System HART Multiplexer is a master as well as a slave system. Additional...
Multiplexer - max. 32 VDC, 100 mA | KFD0 series
The Pepperl+Fuchs K-System HART Multiplexer is a master as well as a slave system. Additional slaves can be connected to the master up to 15 and support another 16 channels. As a complete system, it can drive up to 256 HART field devices, allowing 7936 field devices to be addressed simultaneously through one RS485 with 31 K-System HART Multiplexers.
Signal conditioner sensor / transport - max. 10 kHz | E-852 PISeca™
The E-852 Analog Sensor Electronics by Pieso Nano Positioning ensures an outstanding long-term stability and minimum noise. It is ideal for PISeca™ single-electrode capacitive position...
Signal conditioner sensor / transport - max. 10 kHz | E-852 PISeca™
The E-852 Analog Sensor Electronics by Pieso Nano Positioning ensures an outstanding long-term stability and minimum noise. It is ideal for PISeca™ single-electrode capacitive position sensor. Sensor installation is very simple. It offers a system for capacitive displacement measurement with versatile exceptional solutions for best linearity and resolution. The adjustable bandwidth setting of this device enables the user to adjust the system to different applications. Two versions of the product are currently available, the E-852.10 that provides a standard sensor cable length of 1 m, and the E-852.10A1 that offers an external signal amplifier to enable longer distances between sensor and signal conditioner up to 10 m.
Electro-pneumatic signal converter - ANTLIA
US.3 is a convenient and affordable ultrasound regulator instrument that is used...
Electro-pneumatic signal converter - ANTLIA
US.3 is a convenient and affordable ultrasound regulator instrument that is used in rewinding applications. It can also be utilized for open loop torque control which is fully equipped with a brake, clutch or motor. It also provides precise results and is deemed to be the perfect solution for reel sheet cutters.