+7 (812) 645-08-06
Signal conditioners
select brand
Electro-pneumatic signal converter - T 6111
These electromagnetic converters are utilized for measuring and control tasks by converting direct current input signals into pneumatic output signals. They are particularly useful as an intermediate element...
Electro-pneumatic signal converter - T 6111
These electromagnetic converters are utilized for measuring and control tasks by converting direct current input signals into pneumatic output signals. They are particularly useful as an intermediate element between pneumatic controllers and electric measuring devices, or between pneumatic control valves and electric measuring devices.
The converters can be utilized in all types of industrial application, particularly in the field of process engineering. A load-independent 4 to 20 mA or 0 to 20 mA direct current input signal can be accepted by the converters which they then convert into a pneumatic output signal.
By installing various converter modules, wide output pressure ranges can be selected for the Type 6111 i/p Converter. 8 bar is the maximum achievable output pressure.
The converters can be utilized in all types of industrial application, particularly in the field of process engineering. A load-independent 4 to 20 mA or 0 to 20 mA direct current input signal can be accepted by the converters which they then convert into a pneumatic output signal.
By installing various converter modules, wide output pressure ranges can be selected for the Type 6111 i/p Converter. 8 bar is the maximum achievable output pressure.
Transmitter signal converter - 5 - 24 V, 15 bit
This Sensor Signal Broadcaster is manufactured by Bei Sensors. The tool is capable of accepting the standard incremental encoder inputs....
Transmitter signal converter - 5 - 24 V, 15 bit
This Sensor Signal Broadcaster is manufactured by Bei Sensors. The tool is capable of accepting the standard incremental encoder inputs. It can broadcast up to four encoder signals to four independent devices. Each of the broadcast signals are optically isolated so it can eliminate ground loops.
This equipment also allows the integer divide-by to be incorporated with any of the four broadcast signals. In addition, this broadcaster is suitable for use in applications involving driving multiple receivers from a single encoder.
This equipment also allows the integer divide-by to be incorporated with any of the four broadcast signals. In addition, this broadcaster is suitable for use in applications involving driving multiple receivers from a single encoder.
Galvanic isolator / intrinsically safe / analog input - 0 - 20 mA, 1 - 2 channels | 9160 series
Stahl 9160 series are high performance transmitter supply units , up to SIL 2...
Galvanic isolator / intrinsically safe / analog input - 0 - 20 mA, 1 - 2 channels | 9160 series
Stahl 9160 series are high performance transmitter supply units , up to SIL 2 (IEC 61508. The features intrinsically safe input and galvanic isolation between input, output and power supply [Ex ia] IIC.
The 9160 is equipped with open and short circuit monitoring and messaging for input and output option.
The 9160 is equipped with open and short circuit monitoring and messaging for input and output option.
Galvanic isolator / intrinsically safe / analog input - 0 - 20 mA, 1 - 2 channels | 9163 series
Use this item for four-wire HART transmitters, as well as mA sources. The intrinsically safe input and compatibility...
Galvanic isolator / intrinsically safe / analog input - 0 - 20 mA, 1 - 2 channels | 9163 series
Use this item for four-wire HART transmitters, as well as mA sources. The intrinsically safe input and compatibility with one or two channels, as well as the bidirectional transmission of HART signals are important.
Galvanic isolation between output, input and power supply, while the short-circuit and open-circuit messaging and monitoring are other important features, while installation is possible in Zone 2.
Galvanic isolation between output, input and power supply, while the short-circuit and open-circuit messaging and monitoring are other important features, while installation is possible in Zone 2.
Galvanic isolator / intrinsically safe / analog input - 4 - 20 mA, 1 channels | 9164 series
The mA - Isolating Repeater Series 9164 is ideal for integrating 2 wire I/O cards with 4-wire transmitters....
Galvanic isolator / intrinsically safe / analog input - 4 - 20 mA, 1 channels | 9164 series
The mA - Isolating Repeater Series 9164 is ideal for integrating 2 wire I/O cards with 4-wire transmitters. Through this product, it is possible to interconnect active 2-wire inputs and mA sources. 4-wire transmitters can be connected to increased safety protection or intrinsically safe input.
Moreover, the Series 9164 transmits a bidirectional HART signal with 4 ... 20 mA.
Moreover, the Series 9164 transmits a bidirectional HART signal with 4 ... 20 mA.
Galvanic isolator / intrinsically safe / with analog output - 0 - 20 mA, 1 - 2 channels | 9165 series
The Isolating Repeater Field Circuit Ex i Series 9165 isused for control valves l/p transformers...
Galvanic isolator / intrinsically safe / with analog output - 0 - 20 mA, 1 - 2 channels | 9165 series
The Isolating Repeater Field Circuit Ex i Series 9165 isused for control valves l/p transformers or indicators to ensure an essentially secure performance. Additionally, it can be used for SIL 2 (IEC 61508). Its key features include a safe output, a forceful isolation of input, output and power supply, and observation and messaging of the open circuit/ short-circuit.
Galvanic isolator / intrinsically safe / with analog output - 0 - 20 mA | 9167/..-11-00 series
The series 9167 of isolating repeater loop powered field circuits is suitable for HART output signals between 0/4 and...
Galvanic isolator / intrinsically safe / with analog output - 0 - 20 mA | 9167/..-11-00 series
The series 9167 of isolating repeater loop powered field circuits is suitable for HART output signals between 0/4 and 20mA. The intrinsically safe output and galvanic isolation feature between the outputs and inputs are important, while the item can be used without a power supply.
The internal resistance is very low, while the communication signal transmitting of type HART is bidirectional. This item is suitable for use up to SIL 3 (IEC 61508 standards).
The internal resistance is very low, while the communication signal transmitting of type HART is bidirectional. This item is suitable for use up to SIL 3 (IEC 61508 standards).