+7 (812) 645-08-06
Drill bits, reamers
select brand
Carbide drilling tool / high-performance - ø 3 - 10 mm | KUB Drillmax XL
KOMET KUB® Drillmax XL is a high performance drill used for deep holes. The standard tool range is available from 3.0 to 10.0mm diameter for the 20×D range and 3.0 to 8.0mm for the 30×D....
Carbide drilling tool / high-performance - ø 3 - 10 mm | KUB Drillmax XL
KOMET KUB® Drillmax XL is a high performance drill used for deep holes. The standard tool range is available from 3.0 to 10.0mm diameter for the 20×D range and 3.0 to 8.0mm for the 30×D....
Carbide drilling tool - ø 2 - 20 mm | WD-2D, WD-4D series
WD Series of carbide drills, especially WD-2D & WD-4D drills are noted for their versatility and...
Carbide drilling tool - ø 2 - 20 mm | WD-2D, WD-4D series
WD Series of carbide drills, especially WD-2D & WD-4D drills are noted for their versatility and efficiency. Hence, these are called all-rounder drills and are integrated with some special features. The drills are noted for their optimized horning at cutting edges enabling for a low thrust and a stable cutting torque. Though the drills have small chips, they are capable of stable drilling.
High-speed steel drill bit / HSS - ø 1 - 12 mm | Nexus™
The HSS Nexus Drill is a series of drills manufactured by OSG. It is specifically created for use...
High-speed steel drill bit / HSS - ø 1 - 12 mm | Nexus™
The HSS Nexus Drill is a series of drills manufactured by OSG. It is specifically created for use...
Extra length drill bit - ø 1.6 - 12 mm | TDXL series
The TDXL series are top of the line designs by Toko-ton Spirit. This product features...
Extra length drill bit - ø 1.6 - 12 mm | TDXL series
The TDXL series are top of the line designs by Toko-ton Spirit. This product features 4 newly developed design models which are the Flat flute, Low Resistance Thinning, WXL coating and the Compound flute lead design. These units are designed to cater to a variety of applications and production tasks.
Monobloc drill bit / carbide / 2 lips - ø 3 - 12 mm | WDW series
This product of OSG have achieved its quota because of the cutting edge prompted by the fault in the margin. The WDS-3D...
Monobloc drill bit / carbide / 2 lips - ø 3 - 12 mm | WDW series
This product of OSG have achieved its quota because of the cutting edge prompted by the fault in the margin. The WDS-3D...
Carbide drilling tool - ø 5 - 18 mm | TRS-HO series
The OSG TRS-HO-3D/-5D/-10D are high precision carbide drills with equipped with...
Carbide drilling tool - ø 5 - 18 mm | TRS-HO series
The OSG TRS-HO-3D/-5D/-10D are high precision carbide drills with equipped with three flutes for maximum efficiency. The carbide drills are designed for efficiently processing steel and cast iron materials with a minimum rate of 1,000 mm/min and are available in incremental sizes per 0,1 mm for 3D and 5D series.
High-performance drill bit - ø 0.4 - 6 mm | CrazyDrill Steel™
Under the CrazyDrill Steel brand, this small drill with high performance from Mikron offers truly amazing drilling results with outstanding finished holes even at high drilling speeds. Impressive...
High-performance drill bit - ø 0.4 - 6 mm | CrazyDrill Steel™
Under the CrazyDrill Steel brand, this small drill with high performance from Mikron offers truly amazing drilling results with outstanding finished holes even at high drilling speeds. Impressive...
Aluminum cutting drill bit / high-performance - ø 0.4 - 3 mm | CrazyDrill Alu™
This CrazyDrill for aluminum die-castings and wrought alloys has achieved exceptional results.
The main features:
Faster drilling speeds
Higher drill...
The main features:
Faster drilling speeds
Higher drill...
Aluminum cutting drill bit / high-performance - ø 0.4 - 3 mm | CrazyDrill Alu™
This CrazyDrill for aluminum die-castings and wrought alloys has achieved exceptional results.
The main features:
Faster drilling speeds
Higher drill...
The main features:
Faster drilling speeds
Higher drill...
Center drill bit - ø 0.4 - 6 mm | CrazyDrill Pilot™
The CrazyDrill Pilot from Mikron is mainly used for centering and drilling of pilot holes up to 2 x Ø in one operation that ensures high tolerance. Also, it...
Center drill bit - ø 0.4 - 6 mm | CrazyDrill Pilot™
The CrazyDrill Pilot from Mikron is mainly used for centering and drilling of pilot holes up to 2 x Ø in one operation that ensures high tolerance. Also, it...
High-performance drill bit - ø 0.4 - 6 mm | CrazyDrill Crosspilot™
MIKRON CrazyDrill CrossPilot represents a high-performance, cost-effective drill that solves various problems that occur during difficult angled drilling tasks, in applications like transfer...
High-performance drill bit - ø 0.4 - 6 mm | CrazyDrill Crosspilot™
MIKRON CrazyDrill CrossPilot represents a high-performance, cost-effective drill that solves various problems that occur during difficult angled drilling tasks, in applications like transfer...
Drill bit with internal coolant - ø 0.75 - 6 mm | CrazyDrill Cool™
When precision, depth and accuracy are major concerns for applications, operators use CrazyDrill Cool. The device comes in both coated or non-coated version and is highly useful in non-ferrous metal to heat-treated...
Drill bit with internal coolant - ø 0.75 - 6 mm | CrazyDrill Cool™
When precision, depth and accuracy are major concerns for applications, operators use CrazyDrill Cool. The device comes in both coated or non-coated version and is highly useful in non-ferrous metal to heat-treated...