Drill bits, reamers

select brand


CERATIZIT

Monobloc drill bit / carbide / for aluminum cutting / for steel - ø 1 - 12 mm | W11xx series

Specialists for depth

Quick processing times
The new drill geometries allow for process security...

Monobloc drill bit / carbide / for aluminum cutting / for steel - ø 1 - 12 mm | W11xx series

Specialists for depth

Quick processing times
The new drill geometries allow for process security in drilling, where the swarf can be removed without the need to peck. This shortens the cycle times and therefore reduces the cost per hole.

Minimal production costs
The high cutting performance enormously increases productivity in comparison to conventional deep-hole drilling with gun drills and reduces production costs.

Insert drilling tool / for non-ferrous metals / for cast iron / for steel - 15 m/min | EcoCut

EcoCut is a multifunctional tool that allows drilling and turning with the use of a single device. It solves problems of insufficient...

Insert drilling tool / for non-ferrous metals / for cast iron / for steel - 15 m/min | EcoCut

EcoCut is a multifunctional tool that allows drilling and turning with the use of a single device. It solves problems of insufficient tool storage, ensures less programming effort and the production of a flat bottom hole.

The stock-keeping costs for the tool and its indexable inserts are also reduced, while users can also benefit from significant tool acquisition cost-savings because of the multifunctionality. Finally, the set-up times are shorter than with most similar products as are the presetting times.

Monobloc drilling tool / tungsten carbide / for non-ferrous metals / for aluminum cutting - ø 4 - 8 mm | EcoCut Mini

1 tool for 4 machining operations - Ø-range from 4 to 8 mm

Save costs and time
EcoCut Mini is suitable for the machining of internal and external...

Monobloc drilling tool / tungsten carbide / for non-ferrous metals / for aluminum cutting - ø 4 - 8 mm | EcoCut Mini

1 tool for 4 machining operations - Ø-range from 4 to 8 mm

Save costs and time
EcoCut Mini is suitable for the machining of internal and external...

Insert drilling tool / with 1 tooth / with internal coolant / thread - 110 m/min | ProfileMaster

In competitive market multi-functioning tools are in demand. Ceretizit's profile master revolutionizes machining process...

Insert drilling tool / with 1 tooth / with internal coolant / thread - 110 m/min | ProfileMaster

In competitive market multi-functioning tools are in demand. Ceretizit's profile master revolutionizes machining process with its chipboosters that prevents chips from getting stuck between tools and helps in better chip evacuation. Advantages include reduction of changing, pre-setting, set-up time and programming effort. Wide range of diameters is available and with 'Master finish' effect that results to shorter machining times and excellent surface quality.

Insert drill bit / for stainless steel / for steel / high feed - 200 m/min | MaxiDrill 900

Our high-performance tool for solid drilling

Maximum productivity
The tool body defies the tremendous stress of high-feed-drilling and its stable construction offers perfect drilling quality even with high cutting parameters....

Insert drill bit / for stainless steel / for steel / high feed - 200 m/min | MaxiDrill 900

Our high-performance tool for solid drilling

Maximum productivity
The tool body defies the tremendous stress of high-feed-drilling and its stable construction offers perfect drilling quality even with high cutting parameters. Moreover, the asymmetric chip flute design ensures ideal chip evacuation.

Maximum performance thanks to the newest tooling technology
The tools controlled deviation makes holes without scoring caused by return movement possible, thereby safeguarding surfaces and cutting edges. Thanks to the tried and tested 'hard & tough' coating, the MaxiDrill 900 maintains an extremely long tool life.

Economic system solutions with patented inserts
Low cost with high productivity with 4 cutting edges per insert, no problem! Both the peripheral and the central cutting edges are designed to have the same geometry, size, and grade, simplifying handling and reducing storage costs.
Garant

Boring tool - ERPLUS

The ERplus by Hoffmann Group is a precise boring system. It is a newly manufactured...

Boring tool - ERPLUS

The ERplus by Hoffmann Group is a precise boring system. It is a newly manufactured clamping concept with taper and face clamping, to perform adequate concentricity with stiffness and high clamping force.

The unit's spindle nose can be attached to an ER collet chuck. It has a spindle range diameter of 9.75 - 101.1 mm.

Modular drill bit - HIPER-DRILL

The Hiper-Drill from Garant is a head drill that offers high performance and precision. It also provides...

Modular drill bit - HIPER-DRILL

The Hiper-Drill from Garant is a head drill that offers high performance and precision. It also provides high concentricity for accurate machining performance.

The head drill is equipped with a Vee insert seating for exact positioning of the cutting tool. It ensures safe clamping through its centric bore. The device guarantees maximum stability during operation due to its shank support.

HSS drill bit / high-speed steel / center

The product has a version with spiral fluted ground from solid and relief ground. It's designed to suit 70m/min vc cutting speed in aluminium with maximum of 350N/mm2 of long chipping...

HSS drill bit / high-speed steel / center

The product has a version with spiral fluted ground from solid and relief ground. It's designed to suit 70m/min vc cutting speed in aluminium with maximum of 350N/mm2 of long chipping aluminium, thermoplastics and thermoset resins, magnesium alloys, soft copper, 45m/min vc cutting speed in aluminium cast alloys less than 10% Silicon with maximum of 600N/mm2 and short chipping aluminium, low alloy copper with maximum of 400N/mm2, 40m/min vc cutting speed in general structural steels with maximum of 500N/mm2 and lastly, 30m/min vc cutting speed in unalloyed quenched and tempered steels with maximum of 750N/mm2, case-hardening steels with maximum of 750N/mm2 and nitriding steels with maximum of 750N/mm2.

HSS drill bit / high-speed steel

This ground jobber drill from Hoffman is engineered with great concentricity and pitch accuracy ground point. It produces a smooth finish and is perfect for production drilling....

HSS drill bit / high-speed steel

This ground jobber drill from Hoffman is engineered with great concentricity and pitch accuracy ground point. It produces a smooth finish and is perfect for production drilling. This unit has a standard helix angle with good core thickness and taper. The sizes range from 16 - 20 mm with shank at 16 mm. It is suitable for use common structural steels up to 500 N/mm2 at 40 m/min. It is suitable for applications that are in need of dealing with drill cuts at 30 m/min in unalloyed and temprered steels with 750 N/mm2, unalloyed case-hardening steels up and nitriding steels, cutting speeds at 25 m/min cutting speed in unalloyed quenced and tempered steels, and tool steels up to 900 N/mm2.

Conical drill bit

This model arrives with a pointed drilling point so prior drilling is not required. Conically boosting cutting corners and thoroughly free ground circumference for a matching cut. With scale in the flutes, and three drive flats in the...

Conical drill bit

This model arrives with a pointed drilling point so prior drilling is not required. Conically boosting cutting corners and thoroughly free ground circumference for a matching cut. With scale in the flutes, and three drive flats in the shank. This unit is burr and chatter mark free and is made of stainless steel (V2A) 0.1 - 1 mm, 0.1 - 2 mm Sheet steel and non-ferrous metals: 0.1 - 5 mm, plastics up to 10 mm.

Adding to this, is is perfectly suited for regular construction steels up to 750 N/mm2, alloy free, tempered and quenched steels up to 750 N/mm2, unalloyed case-hardened steels up to 750 N/mm2, nitriding steels up to 750 N/mm2. ? unalloyed quenched and tempered steels up to 900 N/mm2, alloyed quenched and tempered steels up to 900 N/mm2, nitriding steels up to 900 N/mm2, tool steels up to 900 N/mm2, spheroidal graphite cast iron, tempered cast iron and cast iron and can be utilized with cutting oil.

Wood-burning drill bit - 0650610165

The Würth auger drill bits are designed to deliver precision and efficiency...

Wood-burning drill bit - 0650610165

The Würth auger drill bits are designed to deliver precision and efficiency...
{{item.name}}