+7 (812) 645-08-06
Hot runner systems
select brand
Prewired hot runner system for sequential injection molding
The flow hot runner system is manufactured by HRS, and is available in broad range of typology to...
Prewired hot runner system for sequential injection molding
The flow hot runner system is manufactured by HRS, and is available in broad range of typology to meet the request of any requisition. It is a nozzle screw that assures to prevent any potential problem from plastic material leakage in the event of installation error. The system is also heated by tabular heaters, which are especially intended to obtain excellent temperature control.
Hot-half for large parts / integrated
The Hot Half is specifically made up of a single manifold and with the necessary plates for the...
Hot-half for large parts / integrated
The Hot Half is specifically made up of a single manifold and with the necessary plates for the production of the injection. This machine does not require the user to process different machine clearances for the hot runner system. Both the electrical and the pneumatic wiring are provided in accordance to the user's preference. In addition, proper warer circuits are also provided.
Hot-half for stack mold
The Stack Mold is a especially constructed injection unit which has the ability to escalate the production process while ensuring...
Hot-half for stack mold
The Stack Mold is a especially constructed injection unit which has the ability to escalate the production process while ensuring the quality and standards of the manufactured component. It enables the operators to multiply production from the exact injection press. The stack molding system also allows an increase in the production process and reduction in the cost. The HRSflow injection system is also built to be used for sandwich mold which guarantees a lengthened power and stability.
Hot runner system - Diamond Lux line
The diamond lux line is a unit manufactured by HRS. It is a hot runner system intended for the thermal...
Hot runner system - Diamond Lux line
The diamond lux line is a unit manufactured by HRS. It is a hot runner system intended for the thermal...
Hot runner nozzle heating element - max. 30W/cm2 | NHDC
The NHDC Series manufactured by Fepa is a hot runner and nozzle heating element. This device...
Hot runner nozzle heating element - max. 30W/cm2 | NHDC
The NHDC Series manufactured by Fepa is a hot runner and nozzle heating element. This device is applicable for a wide range of applications like injection of molding machines, extruders, hot runner system nozzles and press nozzles.
Moreover, the NHDC hot runner and nozzle heating element has a maximum power voltage of max. 30W/cm2.
Moreover, the NHDC hot runner and nozzle heating element has a maximum power voltage of max. 30W/cm2.
Hot runner nozzle heating element - 230 V | NH2
These NH2 Heaters are the ideal solution for applications...
Hot runner nozzle heating element - 230 V | NH2
These NH2 Heaters are the ideal solution for applications where tight overall dimensions are a primary requirement. It is applicable in injection machines nozzles and hot runner systems.
Hot runner nozzle heating element - hotslot®
With hotslot®, which is based on the proven principle of hotspring® coil heaters, hotset offers an excellent heating...
Hot runner nozzle heating element - hotslot®
With hotslot®, which is based on the proven principle of hotspring® coil heaters, hotset offers an excellent heating...
Hot runner nozzle heating element - hotcast®
hotset offers a wide product range for applications in the casting industry (e. g. hot chamber casting).
The hotcast® Sealed Nozzle Heater (type GMH) based...
The hotcast® Sealed Nozzle Heater (type GMH) based...
Hot runner nozzle heating element - hotcast®
hotset offers a wide product range for applications in the casting industry (e. g. hot chamber casting).
The hotcast® Sealed Nozzle Heater (type GMH) based...
The hotcast® Sealed Nozzle Heater (type GMH) based...