+7 (812) 645-08-06
Blown film extrusion lines
select brand
Blown film extrusion line - max. 400 kg/h
The double bubble extrusion line directs the line works in industries. It ejects the polymers through a circular die and instantly water-quenches them to form a thick primary tube. The Primary tube is then re-heated up to a...
Blown film extrusion line - max. 400 kg/h
The double bubble extrusion line directs the line works in industries. It ejects the polymers through a circular die and instantly water-quenches them to form a thick primary tube. The Primary tube is then re-heated up to a specific temperature and blown for the formation of main bubble of thin film.
It manages non-contact simultaneous orientation due to the air inflated at the time of the start up phase. This air permits the transversal orientation. The machine direction orientation is done at the same time due to variation of speed between the stretching nip roll and the tower nip roll. The bubble is cooled by air and then flattened. Thereafter, the edges are trimmed and two webs rolled up in two reels are acquired. It is plausible to get heat set film like BOPP, BOPA, BOPET and custom products by annealing the product acquired on the biorientation machine.
It manages non-contact simultaneous orientation due to the air inflated at the time of the start up phase. This air permits the transversal orientation. The machine direction orientation is done at the same time due to variation of speed between the stretching nip roll and the tower nip roll. The bubble is cooled by air and then flattened. Thereafter, the edges are trimmed and two webs rolled up in two reels are acquired. It is plausible to get heat set film like BOPP, BOPA, BOPET and custom products by annealing the product acquired on the biorientation machine.
Shrink film extrusion line / blown film - 300 kg/h | S series
The orientation line works using a so called double bubble process. The polymer is extruded through the circular die and is immediately water quenched so as to form a thick primary tube that is...
Shrink film extrusion line / blown film - 300 kg/h | S series
The orientation line works using a so called double bubble process. The polymer is extruded through the circular die and is immediately water quenched so as to form a thick primary tube that is re-heated to a suitable temperature and then blown so as to form the main bubble of thin film. The non-contactsimultaneous orientation which is achieved thanks to the air inflation during the star tup phase. The air allows the transversal orientation as the machine direction orientation is taken simultaneously due to the speed difference between the stretching nip roll and the tower nip roll. The bubble is air cooled and is then flattened. The third bubble is annealed via ovens through the ceramic infra-red heater. The final product can be wound in a tube of fat film.
Blown film extrusion line - 70 - 400 kg/h
GAP's Simultaneox features a polymer extruded through a circular die. It instantly water-quenched to make...
Blown film extrusion line - 70 - 400 kg/h
GAP's Simultaneox features a polymer extruded through a circular die. It instantly water-quenched to make a thick primary tube.
The product is available in different models. They are applicable for shrink barrier film and bags and lid film, lid film and shrink barrier film, shrink barrier film, casing and tubing.
The throughput of the Simultaneox ranges from 70 up to 400 kg/hr.
The product is available in different models. They are applicable for shrink barrier film and bags and lid film, lid film and shrink barrier film, shrink barrier film, casing and tubing.
The throughput of the Simultaneox ranges from 70 up to 400 kg/hr.
Blown film coextrusion line / 3 layers / multilayer
The brand new 3-layer Techno Flex plus series
Undoubtedly, film coextrusion represents the most consolidated technology for the production of standard multipurpose...
Undoubtedly, film coextrusion represents the most consolidated technology for the production of standard multipurpose...
Blown film coextrusion line / 3 layers / multilayer
The brand new 3-layer Techno Flex plus series
Undoubtedly, film coextrusion represents the most consolidated technology for the production of standard multipurpose packaging solutions.
Today, the three-layer coextrusion lines are the preferred option. The standard configuration comprises a central high-capacity extruder, arranged with two smaller extruders intended for the outer layers.
Bandera three-layer coextrusion lines combine top quality and quantity standards.
Pushing on strong customization, Bandera extrusion lines are characterized by production need orientation, top versatility and safety, combined with minimized power consumption.
Undoubtedly, film coextrusion represents the most consolidated technology for the production of standard multipurpose packaging solutions.
Today, the three-layer coextrusion lines are the preferred option. The standard configuration comprises a central high-capacity extruder, arranged with two smaller extruders intended for the outer layers.
Bandera three-layer coextrusion lines combine top quality and quantity standards.
Pushing on strong customization, Bandera extrusion lines are characterized by production need orientation, top versatility and safety, combined with minimized power consumption.
Blown film coextrusion line / 5 layers / multilayer
The 5-layer configuration is perfect for customers looking for high production flexibility to process PE film as well as barrier film.
The 5-layer Techno...
The 5-layer Techno...
Blown film coextrusion line / 5 layers / multilayer
The 5-layer configuration is perfect for customers looking for high production flexibility to process PE film as well as barrier film.
The 5-layer Techno Flex plus extrusion line has been designed for the production of technical film with outstanding top quality mechanical properties.
The 5-layer Techno Flex plus series production range is definitely wide, and comprises, among others:
Film used in top performing converting lines
Film with specific characteristic intended for industrial applications
Barrier film intended for food as well as medical and pharmaceutical applications.
The 5-layer Techno Flex plus extrusion line has been designed for the production of technical film with outstanding top quality mechanical properties.
The 5-layer Techno Flex plus series production range is definitely wide, and comprises, among others:
Film used in top performing converting lines
Film with specific characteristic intended for industrial applications
Barrier film intended for food as well as medical and pharmaceutical applications.
Blown film coextrusion line / 7 layers / multilayer
The brand new 7/9-layer Techno Flex plus series
The 7/9-layer coextrusion lines are intended for customers manufacturing top-notch high-barrier...
The 7/9-layer coextrusion lines are intended for customers manufacturing top-notch high-barrier...
Blown film coextrusion line / 7 layers / multilayer
The brand new 7/9-layer Techno Flex plus series
The 7/9-layer coextrusion lines are intended for customers manufacturing top-notch high-barrier technical film for food, medical, pharmaceutical and several mechanical (e.g. automotive) applications.
The 7/9-layer film have a double and triple barrier, respectively, with an EVOH central layer combined with PA middle layers, thus offering a high performing barrier against gases and water vapour.
Besides, Bandera offers extrusion lines capable of ensuring minimized curling effect in case of asymmetric film structures.
The 7/9-layer coextrusion lines are intended for customers manufacturing top-notch high-barrier technical film for food, medical, pharmaceutical and several mechanical (e.g. automotive) applications.
The 7/9-layer film have a double and triple barrier, respectively, with an EVOH central layer combined with PA middle layers, thus offering a high performing barrier against gases and water vapour.
Besides, Bandera offers extrusion lines capable of ensuring minimized curling effect in case of asymmetric film structures.
Blown film extrusion line - HDB Flex
Initial focusing on offering extrusion lines pursuing excellent mechanical characteristics, weldability, processability and printability, today the market trends require minimized film thickness aimed at maximizing product...
Blown film extrusion line - HDB Flex
Initial focusing on offering extrusion lines pursuing excellent mechanical characteristics, weldability, processability and printability, today the market trends require minimized film thickness aimed at maximizing product capacity.
Bandera has taken on this new challenge finding out specific solutions to meet its customers individual needs, thus confirming once again its outstanding strong customer satisfaction orientation.
Specifically, innovative solutions have been applied in every and each extrusion line section. The most outstanding ones are:
Triple-flow cooling ring, which offers a strongly enhanced production capacity when combined with Bandera design extrusion heads
Specific haul-off units with cutting-edge film cooling system for a better creaseless film surface a solution setting the pace in innovation in HDB film field
Bandera has taken on this new challenge finding out specific solutions to meet its customers individual needs, thus confirming once again its outstanding strong customer satisfaction orientation.
Specifically, innovative solutions have been applied in every and each extrusion line section. The most outstanding ones are:
Triple-flow cooling ring, which offers a strongly enhanced production capacity when combined with Bandera design extrusion heads
Specific haul-off units with cutting-edge film cooling system for a better creaseless film surface a solution setting the pace in innovation in HDB film field
