+7 (812) 645-08-06
Rodless pneumatic cylinders
select brand
Pneumatic cylinder / rodless / magnetically-coupled - Ø 16 - 40 mm | P1Z series
This magnetic linear drive is a new addition to the market, being part of the newest product...
Pneumatic cylinder / rodless / magnetically-coupled - Ø 16 - 40 mm | P1Z series
This magnetic linear drive is a new addition to the market, being part of the newest product range designed and distributed by Origa. What really makes the difference between this model and similar products is the freely rotatable carriage, which offers more flexibility than ever. In addition, you can also opt for a model with two parallel guide rods.
Pneumatic cylinder / rodless - max. 750 N, Ø 25 - 63 mm | OSP-L series
The main advantages of the OSP-L model are the ability to offer one of the lowest leakage rates on the market, as well as the design,...
Pneumatic cylinder / rodless - max. 750 N, Ø 25 - 63 mm | OSP-L series
The main advantages of the OSP-L model are the ability to offer one of the lowest leakage rates on the market, as well as the design, which is proven to be durable. There are various applications you can use this item for, especially those that require maintaining a low leakage rate. The basic model comes with an inner sliding linear guide, but you can adjust the item to the requirements of the application you want to undertake, as the OSP-L can be fitted with external linear ball bearing guides or sliding guides.
Pneumatic actuator / linear / rodless - -40 °C
After the success of the OSP – P actuators, Pneumatic Division Europe – Origa have now come up with OSP-L rodless linear actuators. These new actuators can assure quality output for...
Pneumatic actuator / linear / rodless - -40 °C
After the success of the OSP – P actuators, Pneumatic Division Europe – Origa have now come up with OSP-L rodless linear actuators. These new actuators can assure quality output for...
Pneumatic actuator / linear / rodless / clean-room - DIN, EN, ISO14644-1, ø 16 – 32 mm
This clean room cylinder works in concordance with the latest standards, being certified to DIN EN ISO14644-1....
Pneumatic actuator / linear / rodless / clean-room - DIN, EN, ISO14644-1, ø 16 – 32 mm
This clean room cylinder works in concordance with the latest standards, being certified to DIN EN ISO14644-1. It works perfectly with operations that require a slow, smooth speed, of up to 0.005 m/s. For better results, you can also choose an optional stoke, of up to 1200mm, or even higher on request. The compact design and low maintenance requirements make this item very easy to use and handle for a variety of tasks.
Pneumatic actuator / linear / rodless / explosion-proof - ø 10 - 80 mm, max. 8 bar
From the ORIGA System Plus line comes the ATEX Cylinder that can be used in EX environments. The top...
Pneumatic actuator / linear / rodless / explosion-proof - ø 10 - 80 mm, max. 8 bar
From the ORIGA System Plus line comes the ATEX Cylinder that can be used in EX environments. The top of the line rodless pneumatic cylinders of Pneumatic Division Europe, Origa, belongs to equipment II group under category 2 GD. To continue, the leaflet provides a comprehensive information on using these pneumatic components in A5P060E under "EU Directive 94/9/EG for Pneumatic Components."
Pneumatic cylinder / rodless / double-acting - ø 16 - 63 mm | STD series
Rodless Cylinder Series Std with its superior construction and industry grade materials is certainly an innovation in pneumatic engineering and is a...
Pneumatic cylinder / rodless / double-acting - ø 16 - 63 mm | STD series
Rodless Cylinder Series Std with its superior construction and industry grade materials is certainly an innovation in pneumatic engineering and is a major component in several unique industrial applications. There are different bore sizes, namely 16, 25, 32, 40 and 63 mm. The cylinders are calibrated with extruded anodized aluminium alloy barrel. The strokes vary from 100 to 5700mm. There is an earth magnet configuration to give high strength to the unit. The cylinder comes in a variety of mounting kits and adjustable cushioning. The piston seals themselves are internally lubricated.
Pneumatic cylinder / rodless / with integrated guides - ø 25 - 63 mm
The RODLESS CYLINDER WITH GUIDE “V” is designed specifically to have two opposed V-shaped guide units with two acetalic resin wear-resistant pads slides, which has a tip-up-type carriage-piston rod coupling. The guide units are obtained directly in the anodized...
Pneumatic cylinder / rodless / with integrated guides - ø 25 - 63 mm
The RODLESS CYLINDER WITH GUIDE “V” is designed specifically to have two opposed V-shaped guide units with two acetalic resin wear-resistant pads slides, which has a tip-up-type carriage-piston rod coupling. The guide units are obtained directly in the anodized aluminum cylinder liner. In this way the carriage concentrates on transferring loads axially without being concerned about any support loads and moments in other directions.
The play of the pads is adjusted by side threaded grub screws bringing into use. The wear of pads can be replaced without dismantling the cylinder, which makes the system easy for maintenance. The rodless cylinders exhibit similar features as that of the basic version, which include an integrated adjustable pneumatic cushioning, sensor slots and accessory holding slots.
The most important fact is that you are also provided with separate versions equipped with an adjustable limit switches and hydraulic
decelerators. They can be purchased separately and applied at any time.
The play of the pads is adjusted by side threaded grub screws bringing into use. The wear of pads can be replaced without dismantling the cylinder, which makes the system easy for maintenance. The rodless cylinders exhibit similar features as that of the basic version, which include an integrated adjustable pneumatic cushioning, sensor slots and accessory holding slots.
The most important fact is that you are also provided with separate versions equipped with an adjustable limit switches and hydraulic
decelerators. They can be purchased separately and applied at any time.
Pneumatic actuator / linear / with tube type ball return / rodless - ø 16 - 63 mm
This range of rodless cylinders fitted with ball circulation guides features a high load capacity that is able to act in all permissible directions without the need to first discharge the slide found in the cylinder. These rodless cylinders are...
Pneumatic actuator / linear / with tube type ball return / rodless - ø 16 - 63 mm
This range of rodless cylinders fitted with ball circulation guides features a high load capacity that is able to act in all permissible directions without the need to first discharge the slide found in the cylinder. These rodless cylinders are available in five different bore sizes of 16, 25, 32, 40 and 63mm, and the 63mm model is available in two different styles.
The first version is suitable for intermediate loads while the second is suitable for much heavier loads. These rodless cylinders utilize ball circulation shoe construction with special technology to ensure that they are extremely quiet when the guide slides, and require practically zero maintenance. For instance, the rodless cylinders need to be lubricated once a year or every 2,000km, and it is advised that type two grease containing lithium soap is used. These devices possess very sturdy slide support with multiple holes for fixing loads, in addition to holes for the centering pins.
The first version is suitable for intermediate loads while the second is suitable for much heavier loads. These rodless cylinders utilize ball circulation shoe construction with special technology to ensure that they are extremely quiet when the guide slides, and require practically zero maintenance. For instance, the rodless cylinders need to be lubricated once a year or every 2,000km, and it is advised that type two grease containing lithium soap is used. These devices possess very sturdy slide support with multiple holes for fixing loads, in addition to holes for the centering pins.
Pneumatic cylinder / rodless / with adjustable cushions - ø 25 - 50 mm | PU series
This series PU rodless cylinders has a built in strip to provide for longitudinal tightness. It is also made up of polyurethane (PU) and a harmonic steel wire core. This solution provides great air tightness values. It is specifically best used for high-speed and highly cyclical applications,...
Pneumatic cylinder / rodless / with adjustable cushions - ø 25 - 50 mm | PU series
This series PU rodless cylinders has a built in strip to provide for longitudinal tightness. It is also made up of polyurethane (PU) and a harmonic steel wire core. This solution provides great air tightness values. It is specifically best used for high-speed and highly cyclical applications, even with long strokes.
The external strip provides the necessary protection it needs to avoid foreign bodies to enter. It is built with a harmonic steel. It has an anodised aluminium cylinder liner that is equipped with a T-slot on either side for housing and has the retracting sensors.
It has cylinder control solenoid valves that are able to house the various slots and is tightened using the plates and screws (see General Catalogue page 1-46). Available also are plastic anti-wear guide shoes located on both side of the carriage to provide bigger load capacity. They allow V-slots inside the cylinder liner. Every cylinder has the adjustable pneumatic cushioning. There is a particular version that has hydraulic decelerators + adjustable limit switches. All of this can be purchased in a later stage.
The external strip provides the necessary protection it needs to avoid foreign bodies to enter. It is built with a harmonic steel. It has an anodised aluminium cylinder liner that is equipped with a T-slot on either side for housing and has the retracting sensors.
It has cylinder control solenoid valves that are able to house the various slots and is tightened using the plates and screws (see General Catalogue page 1-46). Available also are plastic anti-wear guide shoes located on both side of the carriage to provide bigger load capacity. They allow V-slots inside the cylinder liner. Every cylinder has the adjustable pneumatic cushioning. There is a particular version that has hydraulic decelerators + adjustable limit switches. All of this can be purchased in a later stage.
Pneumatic cylinder / rodless / magnetically-coupled - ø 16 - 25 mm, 2 - 7 bar
Magnetic-slide rodless pneumatic cylinders are fitted with both a piston and slide with magnets, which runs along the liner mimicking the piston movements. This operation increases efficiency and productivity, but if the axial force exceeds the coupling magnetic force...
Pneumatic cylinder / rodless / magnetically-coupled - ø 16 - 25 mm, 2 - 7 bar
Magnetic-slide rodless pneumatic cylinders are fitted with both a piston and slide with magnets, which runs along the liner mimicking the piston movements. This operation increases efficiency and productivity, but if the axial force exceeds the coupling magnetic force...