+7 (812) 645-08-06
Welding wire feeders
select brand
Welding system wire feeder - max. 15 - 7600 mm/min | CWF series
Cold wire feeders are designed to supply filler metal into the weld puddle during GTAW or PAW. Cold wire feeders provide more accurate wire feed at lower speeds and are specially insulated for the GTAW or...
Welding system wire feeder - max. 15 - 7600 mm/min | CWF series
Cold wire feeders are designed to supply filler metal into the weld puddle during GTAW or PAW. Cold wire feeders provide more accurate wire feed at lower speeds and are specially insulated for the GTAW or PAW environment.
9629 microprocessor control with user friendly software
Can increase weld travel speeds with certain materials
Some applications require wire to avoid cracking in sensitive materials
The addition of wire helps to chill the weld puddle
Adds reinforcement to a butt weld or adds wire to a prepared weld joint
Provides filler material for an overlay or cladding operation
Offers a four-roll feed head with precision motor and tach generator
Feeds wire diameters ranging from .020 to .093 (0.5 to 2.4 mm)
Closed loop speed control is standard
9629 microprocessor control with user friendly software
Can increase weld travel speeds with certain materials
Some applications require wire to avoid cracking in sensitive materials
The addition of wire helps to chill the weld puddle
Adds reinforcement to a butt weld or adds wire to a prepared weld joint
Provides filler material for an overlay or cladding operation
Offers a four-roll feed head with precision motor and tach generator
Feeds wire diameters ranging from .020 to .093 (0.5 to 2.4 mm)
Closed loop speed control is standard
Welding system wire feeder - HWP-50E
The HWP-50E Hot Wire Process is used where high deposition rates, combined with high quality are needed. Used with the GTAW or PAW welding process, the wire is electrically preheated before it enters the weld pool. The system can be used for the surfacing or the joining of ferrous and non ferrous alloys.
Produces...
Produces...
Welding system wire feeder - HWP-50E
The HWP-50E Hot Wire Process is used where high deposition rates, combined with high quality are needed. Used with the GTAW or PAW welding process, the wire is electrically preheated before it enters the weld pool. The system can be used for the surfacing or the joining of ferrous and non ferrous alloys.
Produces high quality welds in either hot wire or cold wire mode
Enhanced control of heat input
Primarily for GTAW and PAW processes to yield deposition rates similar to GMAW
User friendly 9629HW microprocessor control; designed for presetting and sequencing of wire feed speed
Wire feed speed range is 12 to 600 IPM (30 to 1525 CPM) with a speed holding accuracy of 1%
Heavy-duty four roll wire drive unit
Dual-axis wire positioner
Several hot wire torch designs available including narrow groove
Feeds wire sizes from .045” and .062” (1.2 and 1.6 mm)
100% duty cycle, 200 amps at 10 volts AC variable frequency power supply
Current and volt meter
0 to 15 volt open circuit voltage
Easy primary three phase switch over - 380/415/460 volts, 50/60Hz
System includes hot wire power supply, remote control, wire drive, wire feed accessories, wire straightener, standard torch, cables and hoses
Produces high quality welds in either hot wire or cold wire mode
Enhanced control of heat input
Primarily for GTAW and PAW processes to yield deposition rates similar to GMAW
User friendly 9629HW microprocessor control; designed for presetting and sequencing of wire feed speed
Wire feed speed range is 12 to 600 IPM (30 to 1525 CPM) with a speed holding accuracy of 1%
Heavy-duty four roll wire drive unit
Dual-axis wire positioner
Several hot wire torch designs available including narrow groove
Feeds wire sizes from .045” and .062” (1.2 and 1.6 mm)
100% duty cycle, 200 amps at 10 volts AC variable frequency power supply
Current and volt meter
0 to 15 volt open circuit voltage
Easy primary three phase switch over - 380/415/460 volts, 50/60Hz
System includes hot wire power supply, remote control, wire drive, wire feed accessories, wire straightener, standard torch, cables and hoses
Welding system wire feeder - CWF-23E
CWF-23E “Dabber” type wire feeder
Designed to build up weld metal on narrow surfaces while generating relatively little heat input into the parent material
Ideal for build-up or repair of surface areas with narrow cross sections like knife edge type jet engine seals and...
Designed to build up weld metal on narrow surfaces while generating relatively little heat input into the parent material
Ideal for build-up or repair of surface areas with narrow cross sections like knife edge type jet engine seals and...
Welding system wire feeder - CWF-23E
CWF-23E “Dabber” type wire feeder
Designed to build up weld metal on narrow surfaces while generating relatively little heat input into the parent material
Ideal for build-up or repair of surface areas with narrow cross sections like knife edge type jet engine seals and other expensive wear parts. It can be a used for rapid prototyping of seals.
Pulsed current TIG welding reduces the heat input generated by the welding arc and aids in consistent weld bead formation
The filler wire is synchronized with the power supply’s pulse rate. When the current is in high pulse, the wire feeder advances the wire and feeds it into the puddle. The puddle is fluid during high pulse and absorbs the filler wire. When the power supply switches to background current level, the wire retracts and the puddle solidifies to form the build-up. This synchronization assures that only one droplet of filler material is formed and deposited to the part during the current high pulse, creating a smooth and consistent weld build-up.
The CWF-23E “dabber” style wire feed system is designed to be controlled by the 9500 Controller or the Jetstar Computer Controller
Designed to build up weld metal on narrow surfaces while generating relatively little heat input into the parent material
Ideal for build-up or repair of surface areas with narrow cross sections like knife edge type jet engine seals and other expensive wear parts. It can be a used for rapid prototyping of seals.
Pulsed current TIG welding reduces the heat input generated by the welding arc and aids in consistent weld bead formation
The filler wire is synchronized with the power supply’s pulse rate. When the current is in high pulse, the wire feeder advances the wire and feeds it into the puddle. The puddle is fluid during high pulse and absorbs the filler wire. When the power supply switches to background current level, the wire retracts and the puddle solidifies to form the build-up. This synchronization assures that only one droplet of filler material is formed and deposited to the part during the current high pulse, creating a smooth and consistent weld build-up.
The CWF-23E “dabber” style wire feed system is designed to be controlled by the 9500 Controller or the Jetstar Computer Controller
Soldering wire feeder / semi-automatic - 115 - 460 V | Transmig 4HD
Compact Transmig 4RHD (Part No.-706954) is an intelligent...
Soldering wire feeder / semi-automatic - 115 - 460 V | Transmig 4HD
Compact Transmig 4RHD (Part No.-706954) is an intelligent wire feeder that provides exceptional speed control irrespective of changes in line voltage and load on the feed roll, and is ideal for heavy-duty semi-automatic welding.
Welding system wire feeder - 110 V | VAF-4
The VAF-4 is a welding system wire feeder that is specially...
Welding system wire feeder - 110 V | VAF-4
The VAF-4 is a welding system wire feeder that is specially constructed to fit Voltage inter or silicon controlled rectifier MIGs. This welding system is a generated with a maximum power supply of 110 Volts.
Welding system wire feeder - Transmig 2RT
The Transmig 2RT Wirefeeder is made compatible for Euro connection. It is manufactured with an eight pin remote connector. A voltage control and a wire feed speed control are both integrated.
Welding system wire feeder - WeldSkill 4R
The WeldSkill 4R Series manufactured by Cigweld is a welding system wire feeder unit. This device is made with a...
Welding system wire feeder - WeldSkill 4R
The WeldSkill 4R Series manufactured by Cigweld is a welding system wire feeder unit. This device is made with a compact power source, wherein, it can be easily combined with the other models. Additionally, this power source can be combined by the means of plugging and selecting the remote mode.
Moreover, the WeldSkill 4R welding system wire feeder unit is equipped with a spool adaptor, interconnection lead and a shielding gas adaptor.
Moreover, the WeldSkill 4R welding system wire feeder unit is equipped with a spool adaptor, interconnection lead and a shielding gas adaptor.