+7 (812) 645-08-06
Accelerometers, acceleration sensors, shock sensors
select brand
Accelerometer with integrated temperature compensation / low pass / Bessel / 3-pole - NI SCC-ACC01
The SCC-ACC01 from National Instruments 1-channel, signal conditioning accelerometer input module that is...
Accelerometer with integrated temperature compensation / low pass / Bessel / 3-pole - NI SCC-ACC01
The SCC-ACC01 from National Instruments 1-channel, signal conditioning accelerometer input module that is...
Vibration speed sensor - max. 1 kHz | Velomitor® 330505
The 330505 series of Low Frequency Velocity Sensors from GE are used for detecting stator cores and frames,...
Vibration speed sensor - max. 1 kHz | Velomitor® 330505
The 330505 series of Low Frequency Velocity Sensors from GE are used for detecting stator cores and frames, and bearing supports. It can measure vibrations within 0.5 Hertz to 1.0 kilohertz. Moreover, the unit employs a moving coil technology and signal conditioning circuitry that are used by the dual wire design for delivering a voltage output that increases or decreases as the vibration velocity increases or decreases.
Accelerometer - ±196 m/s² ... ±245 m/s², max. 10 kHz | 200150 series
GE's 200150 Accelerometer is originally only valid for integration with the Transducer Interface Module TIM, which is included in the Trendmaster®...
Accelerometer - ±196 m/s² ... ±245 m/s², max. 10 kHz | 200150 series
GE's 200150 Accelerometer is originally only valid for integration with the Transducer Interface Module TIM, which is included in the Trendmaster®...
High-temperature acceleration sensor - max. 785 m/s², max. 400 °C, max. 10 kHz | 330450 HTAS
The 330450 HTAS is used to segregate the sensing element from the signalling conditioning electronics....
High-temperature acceleration sensor - max. 785 m/s², max. 400 °C, max. 10 kHz | 330450 HTAS
The 330450 HTAS is used to segregate the sensing element from the signalling conditioning electronics....
Accelerometer - 490 m/s², max. 15 kHz | 330400, 330425 series
The GE 330400 accelerometer is intended for critical machinery applications where casing...
Accelerometer - 490 m/s², max. 15 kHz | 330400, 330425 series
The GE 330400 accelerometer is intended for critical machinery applications where casing acceleration measurements are required. It is designed to address the requirements of API 670. While the 330425 though its identical but provides a larger amplitude range of 75 g peak and a sensitivity of 25 mV/g peak. Both don't require an external interface module.
Linear velocity transducer - 63.5 mm/s | 190501 Velomitor®
The 190501 Velomitor transducer is a low-frequency version, which is specifically...
Linear velocity transducer - 63.5 mm/s | 190501 Velomitor®
The 190501 Velomitor transducer is a low-frequency version, which is specifically designed to measure the casing vibration velocity on cooling towers and air-cooled heat-exchanger fan assemblies operating as low as 90 rpm. It can measure vibration amplitudes at these frequencies generated by the fan motor and speed reducer.
Acceleration sensor
This line of acceleration sensors are designed with an electrostatic capacitance detection...
Acceleration sensor
This line of acceleration sensors are designed with an electrostatic capacitance detection technology and offer a fast response time. They are RoHS compliant that has a superior offset voltage temperature and feature a compact size which measures 2.283x1.437x1.299 inches without the bracket. Mounting can be done directly on the bracket.