+7 (812) 645-08-06
Swivels, rollers
select brand
Stud type track roller
Yoke type track rollers can be single- or double-row units and are fitted on studs. They consist of a needle roller and cage assemblies as well...
Stud type track roller
Yoke type track rollers can be single- or double-row units and are fitted on studs. They consist of a needle roller and cage assemblies as well as thick-walled outer ring that has profiled outside surface or full complement sets of needle or cylindrical rollers. Yoke type track rollers can support high axial loads and radial loads.
These loads can come from skewed running and misalignments and are needed for conveying equipment, slideways and drives. The bearings can come with or without the inner ring and also in sealed and open versions.
These loads can come from skewed running and misalignments and are needed for conveying equipment, slideways and drives. The bearings can come with or without the inner ring and also in sealed and open versions.
Ball roller
These self-retaining track rollers have single or double row units and exceptionally thick-walled outer rings. Axial forces in both directions can be supported...
Ball roller
These self-retaining track rollers have single or double row units and exceptionally thick-walled outer rings. Axial forces in both directions can be supported by these bearings, as well as high radial forces. A crowned or cylindrical external surface is applied to the bearing outer rings of the track rollers.
In instances where there is a misalignment in relation to the raceway, designs with a crowned outside surface are used. Edge stresses must be avoided in these cases. Designed by Schaeffler, the track rollers are supplied with an inner ring, a stud and with a plastic tire on the outer ring.
In instances where there is a misalignment in relation to the raceway, designs with a crowned outside surface are used. Edge stresses must be avoided in these cases. Designed by Schaeffler, the track rollers are supplied with an inner ring, a stud and with a plastic tire on the outer ring.
Maintenance-free rod end - ELGES
The ends of these rods consist of an integral shark housing along with a spherical plain...
Maintenance-free rod end - ELGES
The ends of these rods consist of an integral shark housing along with a spherical plain bearing that requires maintenance. They are ideal for radial loads in certain conditions and unilateral loads under certain conditions. The radial forces are supported by the tensile or compressive direction for transmitting movements and forces at low levels.
Heavy-duty cam follower - ø 35 - 110 mm | PWTR, PWKR
The newly introduced PWKR and PWTR series from the family of Yoke Type and Stud Type Track Rollers are highly efficient with robust bearing supports and a long operating life. The Yoke and Stud type rollers are most...
Heavy-duty cam follower - ø 35 - 110 mm | PWTR, PWKR
The newly introduced PWKR and PWTR series from the family of Yoke Type and Stud Type Track Rollers are highly efficient with robust bearing supports and a long operating life. The Yoke and Stud type rollers are most preferred for transmitting high radial load and guarantee an exceptional performance.
The basic rating life seems to have gone up by almost 30 per cent with the use of optimized raceway of the outer ring and interchangeable materials. Additionally, there is a reduction in the stress levels on the mating track owing to enhanced surface quality which results in robust bearing, high reliability and long operating life.
With the optimized raceway geometry, the life quality is 30 per cent higher static and has a high load carrying capacity. It offers surface quality, resistance to wear and greater acceptable rings.
The basic rating life seems to have gone up by almost 30 per cent with the use of optimized raceway of the outer ring and interchangeable materials. Additionally, there is a reduction in the stress levels on the mating track owing to enhanced surface quality which results in robust bearing, high reliability and long operating life.
With the optimized raceway geometry, the life quality is 30 per cent higher static and has a high load carrying capacity. It offers surface quality, resistance to wear and greater acceptable rings.
Guide roller
The Collision Sensing Terrain Follower is designed to sense the unevenness of surfaces. The machine is manufactured with an advanced and innovative technology that allows machine standoff to be set...
Guide roller
The Collision Sensing Terrain Follower is designed to sense the unevenness of surfaces. The machine is manufactured with an advanced and innovative technology that allows machine standoff to be set initially and continues the operation without any involvement from the operator's side. The machine automatically and constantly maintains the accurate standoff by compensating for any changes in the material's height.
During operation, the Collision Sensing Terrain Follower also senses any potential collisions that could occur and instantly pauses the machine in order to protect it from possible damage. The machine has a simple and compact body design that can be retrofitted to any motorized Z-axis or tilted A-jet cutting head, without requiring any additional programming.
During operation, the Collision Sensing Terrain Follower also senses any potential collisions that could occur and instantly pauses the machine in order to protect it from possible damage. The machine has a simple and compact body design that can be retrofitted to any motorized Z-axis or tilted A-jet cutting head, without requiring any additional programming.