+7 (812) 645-08-06
Swivels, rollers
select brand
Male rod end
Ball joints are indispensable tools in a wide variety of applications, especially those that are in the mechanical...
Male rod end
Ball joints are indispensable tools in a wide variety of applications, especially those that are in the mechanical industry. For general use, steel or stainless steel ball joints are advisable. They are particularly suitable for continuously changing thrust as well as shock loads in radial and axial plane. There are different kinds of ball joints, such ones with female thread and ones with threaded stud, among others.
Aluminium clevis
The GN 751 fork joints manufactured by Ganter-Griff comprise either a DIN 71752 fork head with an SL-shaft protection or KL-shaft protection. These shafts are constructed with spring sheet metal and is toughened with zinc plate. Its framework material is made of black encrusted aluminum that is wear-free and durable.
Fork joint
Material: Steel
Surface: Galvanised
Design: With cotter pins
DIN: 71751
Form: A
Nominal diameter: 16 mm
Bolt diameter: 16 mm
Width: 32 mm
Slot width: 16 mm
Surface: Galvanised
Design: With cotter pins
DIN: 71751
Form: A
Nominal diameter: 16 mm
Bolt diameter: 16 mm
Width: 32 mm
Slot width: 16 mm
Right-angle ball joint - 026820510
DIN 71802 steel galvanised shape-A angle-joint is designed to change the...
Right-angle ball joint - 026820510
DIN 71802 steel galvanised shape-A angle-joint is designed to change the direction of pressure applied to the object. When used in a machine, this joint allows energy to move in a non-linear path. It features a thread type x nominal diameter of 5mm and length tenon from collar of 10.2mm.
Ball joint
Line 8 profiles can be interconnected at any chosen point by Ball Joint 8. It can either be screwed into the profile groove or into the end face of the profile. Ball joints can be used to connect and stabilize...
Ball joint
Line 8 profiles can be interconnected at any chosen point by Ball Joint 8. It can either be screwed into the profile groove or into the end face of the profile. Ball joints can be used to connect and stabilize diagonals or for lightweight adjustment devices. In order to facilitate rapid manual adjustments, Ball joint 8 is also available with a clamp lever.
When using Ball joint 8, it is necessary to select two ball ends which are suitable for the profile. When connecting to profiles 8 with right-angled cross-sections, ball end 40x40 can be used. When connecting to Profiles 8 D40 with a round cross-section, ball end D40 can be used.
The central securing screw M8 has a maximum tightening torque of 25 Nm, The permissible loading moments for Ball Joint 8 are 2 Nm (deflection MB) and 3 Nm (torsion T).
When using Ball joint 8, it is necessary to select two ball ends which are suitable for the profile. When connecting to profiles 8 with right-angled cross-sections, ball end 40x40 can be used. When connecting to Profiles 8 D40 with a round cross-section, ball end D40 can be used.
The central securing screw M8 has a maximum tightening torque of 25 Nm, The permissible loading moments for Ball Joint 8 are 2 Nm (deflection MB) and 3 Nm (torsion T).