+7 (812) 645-08-06
Bearing units
select brand
Ball bearing bearing unit - 20 - 100 mm | Sealmaster®
The Sealmaster Gold Mounted Ball Bearings from EMERSON, employ wide outer race insert bearings, land riding metallic retainers, and black oxide coated bearing steels which have an exclusive...
Ball bearing bearing unit - 20 - 100 mm | Sealmaster®
The Sealmaster Gold Mounted Ball Bearings from EMERSON, employ wide outer race insert bearings, land riding metallic retainers, and black oxide coated bearing steels which have an exclusive...
Ball bearing bearing unit - 20 - 60 mm | Browning®
The browning mounted ball bearings are designed with multiple housing styles, materials and configurations and features an extended inner race insert bearing with ball riding nylon retainer....
Ball bearing bearing unit - 20 - 60 mm | Browning®
The browning mounted ball bearings are designed with multiple housing styles, materials and configurations and features an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet which helps prevention of outer rotation and is available with a setscrew, eccentric, or exclusive BOA concentric locking collar. The contact seal, with a black oxide treated flinger, ensure a good balance between prevention of contaminant entry and grease loss with reduced friction as well. Based on your performance, the bearings are available in inch and metric bore with a wide range of cast iron, stamped steel or rubber mount housings or with industry-specific solutions as illustrated on the following pages.
Ball bearing bearing unit / corrosion-resistant - 1" - 2 7/16" | SKWEZLOC®
The Sealmaster material handling bearings has several housing styles including flanges, take up, pillow block or hanger. It has a bore diameter size that ranges...
Ball bearing bearing unit / corrosion-resistant - 1" - 2 7/16" | SKWEZLOC®
The Sealmaster material handling bearings has several housing styles including flanges, take up, pillow block or hanger. It has a bore diameter size that ranges...
Tapered roller bearing unit - 1 3⁄16" - 5" | Browning® E920 series
The Browning E920 series consists of resilient and non-expanding housings that has Type E mounting dimensions and...
Tapered roller bearing unit - 1 3⁄16" - 5" | Browning® E920 series
The Browning E920 series consists of resilient and non-expanding housings that has Type E mounting dimensions and limited misalignment. It is equipped with several features including a collar mount system, a contact seal and heavy duty tapered roller bearings along with one-piece cast iron housing.
The E920 series contains setscrew locking collars that maintain the balance between pollutant entry, grease redemption and abrasion.
The E920 series contains setscrew locking collars that maintain the balance between pollutant entry, grease redemption and abrasion.
Tapered roller bearing unit - 35 - 125 mm | Sealmaster® RPB
The Sealmaster® RPB mounted tapered roller bearings are the improved and upgraded version of the competitive type E bearings that are dimensionally interchangeable. They contain heavy-duty tapered...
Tapered roller bearing unit - 35 - 125 mm | Sealmaster® RPB
The Sealmaster® RPB mounted tapered roller bearings are the improved and upgraded version of the competitive type E bearings that are dimensionally interchangeable. They contain heavy-duty tapered...
Stainless steel pillow block
Material: Housing from two-part sheets: Stainless steel 1.4305 (X5CrNi18-10, AISI 304). Rolling...
Stainless steel pillow block
Material: Housing from two-part sheets: Stainless steel 1.4305 (X5CrNi18-10, AISI 304). Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C).
The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews.
Lubricated for life at normal operating conditions. Re-lubricating is not possible.
The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews.
Lubricated for life at normal operating conditions. Re-lubricating is not possible.
Linear bearing unit / ball bearing - KB-1 ISO Serie 1
Linear bearings from reliable brand in good quality at low price. These linear bearings can be fitted...
Linear bearing unit / ball bearing - KB-1 ISO Serie 1
Linear bearings from reliable brand in good quality at low price. These linear bearings can be fitted...
Linear bearing unit / ball bearing / aluminium - KG-3 ISO Serie 3
Material: Material: Housing made from extruded aluminium with a closed linear...
Linear bearing unit / ball bearing / aluminium - KG-3 ISO Serie 3
Material: Material: Housing made from extruded aluminium with a closed linear bearing of the ISO Series 3
from reliable brand in good quality at low price. Self-aligning capability that accommodates tilting.
All bearings are lubricated ready-to-install. Recommended shaft tolerance h6.
from reliable brand in good quality at low price. Self-aligning capability that accommodates tilting.
All bearings are lubricated ready-to-install. Recommended shaft tolerance h6.
Linear bearing unit / ball bearing / aluminium / closed-structure - KGT-3 ISO Series 3
Material: Material: Housing made from extruded aluminium with two closed linear...
Linear bearing unit / ball bearing / aluminium / closed-structure - KGT-3 ISO Series 3
Material: Material: Housing made from extruded aluminium with two closed linear bearings of the ISO Series 3
from reliable brand in good quality at low price. Self-aligning capability that accommodates tilting.
All bearings are lubricated ready-to-install. Recommended shaft tolerance h6.
from reliable brand in good quality at low price. Self-aligning capability that accommodates tilting.
All bearings are lubricated ready-to-install. Recommended shaft tolerance h6.
Ball bushing pillow block / for guide rods - Ø10 - 40 mm
The unit is a shaft bearing that is integrated with either ball bearings, bearings made of brass,...
Ball bushing pillow block / for guide rods - Ø10 - 40 mm
The unit is a shaft bearing that is integrated with either ball bearings, bearings made of brass,...
Stainless steel bearing unit / for guide rods - Ø12 - 25 mm
The shaft bearings for guide rods from Ø12 to Ø25 are well equipped with ball bearings or polymer...
Stainless steel bearing unit / for guide rods - Ø12 - 25 mm
The shaft bearings for guide rods from Ø12 to Ø25 are well equipped with ball bearings or polymer...
Ball bushing pillow block / aluminium - Ø12 - 25 mm
This bearing block has aluminium housing with 4 ball bearings which are protected...
Ball bushing pillow block / aluminium - Ø12 - 25 mm
This bearing block has aluminium housing with 4 ball bearings which are protected by wiper seals. In the case of dusty environment additional wipers in NBR or PUR are available. The block comes in 4 sizes for rods 01, 16, 20 and 25. It permits realization linear tables with 2 rods, or crossed tables XY with 2 blocks.