+7 (812) 645-08-06
Other grinding machines
select brand
Gear grinding machine - RZ 60
If the demand for gears and lot sizes increase so much that productivity is the highest priority, the RZ 60 is the perfect choice. This machine is designed for production of precise and quiet planetary gears in automotive transmissions - as well as for mass productions of other small gears.
100 m/s - a Technological Leap
With the RZ 60, Reishauer presents a unique and trend-setting...
100 m/s - a Technological Leap
With the RZ 60, Reishauer presents a unique and trend-setting...
Gear grinding machine - RZ 60
If the demand for gears and lot sizes increase so much that productivity is the highest priority, the RZ 60 is the perfect choice. This machine is designed for production of precise and quiet planetary gears in automotive transmissions - as well as for mass productions of other small gears.
100 m/s - a Technological Leap
With the RZ 60, Reishauer presents a unique and trend-setting high speed technology. An increased maximum grinding speed of 100 m/s allows an increase in productivity more reliably than with high feed rates or number of starts - of course without modifying the micro or macro geometry of the gears or causing any grinding burn. The internationally well-respected GS Certificate for the machine as well as for the grinding wheels made by Reishauer assure the required safety in industrial practice.
10 seconds - Faster than Everything Else
The RZ 60 adapts the basic set-up of the RZ 160 and always geatues a two-workspindle design. Two extremly quick meshing sensors are respnsible for the precise synchronization of grinding wheel and gear. But above all, the architecture of the control unit as well as highly sophisticated software cycles abstaining from all kind of ballast needed for universal gear grinding machines allow for the unique performance of the machine.
In perfect interaction of serveral NC units with Reishauer PrecisionDrive, all procedures are parallelized in order to eliminate secondary times almost completely. This way, een at minimum cycle times of 10 seconds, there is time for spinning of the oil inside the machine. Large grinding wheel width in combination with multiple-rip full profile rolls minimize the share of dressing times.
100 m/s - a Technological Leap
With the RZ 60, Reishauer presents a unique and trend-setting high speed technology. An increased maximum grinding speed of 100 m/s allows an increase in productivity more reliably than with high feed rates or number of starts - of course without modifying the micro or macro geometry of the gears or causing any grinding burn. The internationally well-respected GS Certificate for the machine as well as for the grinding wheels made by Reishauer assure the required safety in industrial practice.
10 seconds - Faster than Everything Else
The RZ 60 adapts the basic set-up of the RZ 160 and always geatues a two-workspindle design. Two extremly quick meshing sensors are respnsible for the precise synchronization of grinding wheel and gear. But above all, the architecture of the control unit as well as highly sophisticated software cycles abstaining from all kind of ballast needed for universal gear grinding machines allow for the unique performance of the machine.
In perfect interaction of serveral NC units with Reishauer PrecisionDrive, all procedures are parallelized in order to eliminate secondary times almost completely. This way, een at minimum cycle times of 10 seconds, there is time for spinning of the oil inside the machine. Large grinding wheel width in combination with multiple-rip full profile rolls minimize the share of dressing times.
Gear grinding machine - RZ 160
The RZ 160 gear grinding machine continues the success of the well-known RZ 150. It adopts the significant successful featues and has been improved at the same time in order to further increase the customer satisfaction.
Modular and Configurable for Your...
Modular and Configurable for Your...
Gear grinding machine - RZ 160
The RZ 160 gear grinding machine continues the success of the well-known RZ 150. It adopts the significant successful featues and has been improved at the same time in order to further increase the customer satisfaction.
Modular and Configurable for Your Production
The RZ 160 provides the possibility to adapt the machine individually to the demands in your particular production. Thus, it is possible to find the best compromise between productivity, flexibility and investment costs.
Among others, the following options are available:
Second workspindle for increase of productivity
Backlash-free high-precision pivoting dressing spindle allows the use of lower cost flexible dressing tools and special technologies
CNC tailstocks for accurately adjustable axial clamping force promotes high repeatability
Profile grinding on main spindle or on Reishauer Profile Grinding Head with integraed high speed spindle
Measuring system with the scanning staylus for short measuring times at high resolution
Modular and Configurable for Your Production
The RZ 160 provides the possibility to adapt the machine individually to the demands in your particular production. Thus, it is possible to find the best compromise between productivity, flexibility and investment costs.
Among others, the following options are available:
Second workspindle for increase of productivity
Backlash-free high-precision pivoting dressing spindle allows the use of lower cost flexible dressing tools and special technologies
CNC tailstocks for accurately adjustable axial clamping force promotes high repeatability
Profile grinding on main spindle or on Reishauer Profile Grinding Head with integraed high speed spindle
Measuring system with the scanning staylus for short measuring times at high resolution
Gear grinding machine - max. ø 260 mm | RZ 260
The RZ 260 is based on established concepts which have been consequently enhanced and improved. The result is a unique gear grinding machine with the highest efficiency and quality for grinding gears with outside diameters up to 260 mm.
Rotating workspindle turret for optimum accessibility during set-up and...
Rotating workspindle turret for optimum accessibility during set-up and...
Gear grinding machine - max. ø 260 mm | RZ 260
The RZ 260 is based on established concepts which have been consequently enhanced and improved. The result is a unique gear grinding machine with the highest efficiency and quality for grinding gears with outside diameters up to 260 mm.
Rotating workspindle turret for optimum accessibility during set-up and loading
Totally enclosed working area to avoid release of oil and oil mist
During grinding, the dresser moves into a protected parking position
Flexibility and Productivity
The RZ 260 is available in four versions. In the basic version, the RZ 260 is equipped with one workspindle. For loading, this is automatically moved into a well-accessible loading position.
For very high productivity demands, the machine can be equipped with two workspindles. In this configuration, the ground gear can be exchanged while another gear is ground on the second spindle.
The machine is equipped with a fixed dressing unit if only a small variety of gears is ground. Different gear geo-metries can be ground using workpiece specific dressing tools.
Maximum flexibility can be reached by using a pivoting dressing unit. With this version, the dressing tools can be used for a larger range of gears.
Rotating workspindle turret for optimum accessibility during set-up and loading
Totally enclosed working area to avoid release of oil and oil mist
During grinding, the dresser moves into a protected parking position
Flexibility and Productivity
The RZ 260 is available in four versions. In the basic version, the RZ 260 is equipped with one workspindle. For loading, this is automatically moved into a well-accessible loading position.
For very high productivity demands, the machine can be equipped with two workspindles. In this configuration, the ground gear can be exchanged while another gear is ground on the second spindle.
The machine is equipped with a fixed dressing unit if only a small variety of gears is ground. Different gear geo-metries can be ground using workpiece specific dressing tools.
Maximum flexibility can be reached by using a pivoting dressing unit. With this version, the dressing tools can be used for a larger range of gears.
Gear grinding machine - ø 550 mm | RZ 550
Within the Reishauer product line, the RZ 550 represents maximum flexibility surpassing the successful RZ 400 now with more than 300 installations...
Gear grinding machine - ø 550 mm | RZ 550
Within the Reishauer product line, the RZ 550 represents maximum flexibility surpassing the successful RZ 400 now with more than 300 installations worldwide. The working range of the new machine has been increased to 550 mm diameter and the machine is capable of grinding gears up to module 10.
Due to the large variety of options, the RZ 550 is easily adapted to the wide ranging needs of different customers and industries. Many of these options can be added to the machine after it has been installed at the customer's plant.
Due to the large variety of options, the RZ 550 is easily adapted to the wide ranging needs of different customers and industries. Many of these options can be added to the machine after it has been installed at the customer's plant.
Gear grinding machine - RZ 1000
The RZ 1000, the largest continuous generating gear grinding machine in the Reishauer product line, is capable of high performance grinding of large gears to highest accuracies.
The RZ 1000 replaces all previous models in this range and possesses...
The RZ 1000 replaces all previous models in this range and possesses...
Gear grinding machine - RZ 1000
The RZ 1000, the largest continuous generating gear grinding machine in the Reishauer product line, is capable of high performance grinding of large gears to highest accuracies.
The RZ 1000 replaces all previous models in this range and possesses enhanced software, which generates machine data parameters that are adapted to the gear being ground.
The RZ 1000 provides highest productivity and flexibility for the entire variety of parts and meets all demands for quick, flexible setup and short changeover time.
A very fast and highly precise generating module in conjunction with a flexible control are the precondition for the perfectly controlled generating grinding process ensuring qualitative and economically optimum results. Due to its versatile configurable concept, the SIEMENS 840D CNC controls affords a comfortable platform for the integration of the REISHAUER solution for the electronic gearbox as well as the REISHAUER operator interface and technology software.
The RZ 1000 replaces all previous models in this range and possesses enhanced software, which generates machine data parameters that are adapted to the gear being ground.
The RZ 1000 provides highest productivity and flexibility for the entire variety of parts and meets all demands for quick, flexible setup and short changeover time.
A very fast and highly precise generating module in conjunction with a flexible control are the precondition for the perfectly controlled generating grinding process ensuring qualitative and economically optimum results. Due to its versatile configurable concept, the SIEMENS 840D CNC controls affords a comfortable platform for the integration of the REISHAUER solution for the electronic gearbox as well as the REISHAUER operator interface and technology software.
Flat part grinding machine / automatic - RFG
You're in the field of
- spinning mills or have a
- carding flat workshop?
We...
- spinning mills or have a
- carding flat workshop?
We...
Flat part grinding machine / automatic - RFG
You're in the field of
- spinning mills or have a
- carding flat workshop?
We are the right people to speak to!
Our Rosink RFG is ideal for the
- precise grinding of the flat wire of all cards!
The Rosink RFG
- is of top quality,
- is easy to operate and
- improves your production quality!
- spinning mills or have a
- carding flat workshop?
We are the right people to speak to!
Our Rosink RFG is ideal for the
- precise grinding of the flat wire of all cards!
The Rosink RFG
- is of top quality,
- is easy to operate and
- improves your production quality!
Gear grinding machine - max. ø 500 mm | GT 500 H
The GT 500 H is designed for profile and generating grinding of spur and helical external gears as well as other profiles that can be generated by hobbing. Purpose built for top-quality, efficient, small, medium and large batch manufacturing of gears and geared shafts, the GT 500 H is a real all-rounder...
Gear grinding machine - max. ø 500 mm | GT 500 H
The GT 500 H is designed for profile and generating grinding of spur and helical external gears as well as other profiles that can be generated by hobbing. Purpose built for top-quality, efficient, small, medium and large batch manufacturing of gears and geared shafts, the GT 500 H is a real all-rounder and a true winner when it comes to prototyping applications. The machine grinds workpieces using the continuous generating grinding method and may mount both dressable and non-dressable worm wheels. Moreover, depending on production requirements, workpieces can also be ground using the profile grinding method (single-indexing method). Again it is possible to mount both dressable and non-dressable grinding wheels and this method may be implemented to grind workpieces singularly or in any preferred combination. Various dressing solutions with dressing rolls are available to dress profile grinding wheels and worm wheels. The centring and measuring unit is naturally fully integrated. Operating costs in terms of energy, coolant and tools are optimised to save you money. Contact us now for more information on this innovative product. We look forward to your inquiries.
Gear grinding machine - max. ø 400 mm | GR 500 H
Based on the structure and axis kinematics of the G 500 H, the GR version of the machine is specifically equipped for the manufacturing of rotors. With it's single grinding spindle it allows its operator to grind small to medium lots with unmatched...
Gear grinding machine - max. ø 400 mm | GR 500 H
Based on the structure and axis kinematics of the G 500 H, the GR version of the machine is specifically equipped for the manufacturing of rotors. With it's single grinding spindle it allows its operator to grind small to medium lots with unmatched quality, making the GR 500 H an optimum prototyping instrument. Equipped with dressable corundum wheels, integrated dressing and measuring units profile deviations can be auto-corrected immediately.
For larger lot manufacturing we recommend the connection of the machine to an external measuring unit allowing for maximum efficiency and best results. With the GR 500 H you receive a specific rotor software package developed under real rotor manu-facturing conditions, reliable and flexible alike.
The specific strength of the GR 500 H shows in the flexible manufacturing with dressable corundum wheels. For surface structure requirements and higher speeds you can employ CBN grinding wheels as well.
For larger lot manufacturing we recommend the connection of the machine to an external measuring unit allowing for maximum efficiency and best results. With the GR 500 H you receive a specific rotor software package developed under real rotor manu-facturing conditions, reliable and flexible alike.
The specific strength of the GR 500 H shows in the flexible manufacturing with dressable corundum wheels. For surface structure requirements and higher speeds you can employ CBN grinding wheels as well.
Gear grinding machine - max. ø 250 mm | G 250
The Samputensili G 250 generating grinding machine is based on the established concepts of the best-selling Samputensili S 250/400 G machine, which have been further enhanced and improved. The result is an innovative, compact and extremely flexible gear hobbing and grinding...
Gear grinding machine - max. ø 250 mm | G 250
The Samputensili G 250 generating grinding machine is based on the established concepts of the best-selling Samputensili S 250/400 G machine, which have been further enhanced and improved. The result is an innovative, compact and extremely flexible gear hobbing and grinding machine.
The Samputensili G 250 has been especially developed for very low cycle times and for top-quality and efficient mass production of gears with outside
diameters up to 250 mm and shafts with lengths up to 500 mm. The G 250 features dual work spindles that eliminate non-productive times almost completely.
Particular attention has been paid to the state-of-the-art solutions that allow a fast tool change, e.g. from hobbing to grinding, guaranteeing an unmatched process versatility.
The machine can equally use form and worm grinding wheels, both in ceramic and in CBN electroplated.
Simple design concepts in terms of tooling and dressing technology, fast automation and amazing user-friendliness are the strengths behind this unique machine.
The Samputensili G 250 has been especially developed for very low cycle times and for top-quality and efficient mass production of gears with outside
diameters up to 250 mm and shafts with lengths up to 500 mm. The G 250 features dual work spindles that eliminate non-productive times almost completely.
Particular attention has been paid to the state-of-the-art solutions that allow a fast tool change, e.g. from hobbing to grinding, guaranteeing an unmatched process versatility.
The machine can equally use form and worm grinding wheels, both in ceramic and in CBN electroplated.
Simple design concepts in terms of tooling and dressing technology, fast automation and amazing user-friendliness are the strengths behind this unique machine.
Gear grinding machine - max. ø 450 mm | G 450
The Samputensili G 450 is an innovative, compact and extremely flexible gear grinding machine. The Samputensili G450 has been especially developed for very low cycle times and for top-quality and efficient...
Gear grinding machine - max. ø 450 mm | G 450
The Samputensili G 450 is an innovative, compact and extremely flexible gear grinding machine. The Samputensili G450 has been especially developed for very low cycle times and for top-quality and efficient mass production of gears with outside diameters up to 450 mm and shafts with lengths up to 550 mm. The machine can equally use form and worm grinding wheels, both in ceramic and in electroplated CBN. Simple design concepts in terms of tooling and dressing technology, fast automation and amazing user-friendliness are the strengths behind this unique machine. The work spindle mounted on a rotating table simplifies the loading/unloading operation as well as the tooling operations. The dressing spindle is mounted on the rotating table as well, but diametrically opposite to the work spindle.
Cylindrical grinding machine / CBN - max. ø 400 mm | GRX 500 H
The GRX is a larger and stronger version of the GR. Its powerful twin spindle and extremely stabile bed design make it a must for the manufacture of very large screws and rotors.
Especially...
Especially...
Cylindrical grinding machine / CBN - max. ø 400 mm | GRX 500 H
The GRX is a larger and stronger version of the GR. Its powerful twin spindle and extremely stabile bed design make it a must for the manufacture of very large screws and rotors.
Especially adapted to grind with CBN, the GRX also makes working with dressable ceramic wheels or even combinations of the two easy. An integrated measuring unit also makes the correction of rotor prototypes and pre-production pieces more straightforward.
For more effi cient handling, you can link the GRX to an external robot device and connect it directly with an external measuring unit.
Like the GR, the GRX comes with a rotor-specifi c software package, developed under real manufacturing conditions.
Especially adapted to grind with CBN, the GRX also makes working with dressable ceramic wheels or even combinations of the two easy. An integrated measuring unit also makes the correction of rotor prototypes and pre-production pieces more straightforward.
For more effi cient handling, you can link the GRX to an external robot device and connect it directly with an external measuring unit.
Like the GR, the GRX comes with a rotor-specifi c software package, developed under real manufacturing conditions.