Conveyor monitoring

select brand


ACF

Air compressor station / mobile - 7 bar | CM4

The CM4 series of Air Compressors from ACF employs 2 cylinders, produce up to...

Air compressor station / mobile - 7 bar | CM4

The CM4 series of Air Compressors from ACF employs 2 cylinders, produce up to 330 liters of output every minute, and operate with up to 7 bars of pressure. It is usable for applications concerning Colibri and D50 blasters, painting nd inflating guns, and staplers. In addition, it utilizes a 9-liter air tank.
GAV

Air mini compressor - HUSKY

The mini-spray guns from GAV is an auto-stop mini air-compressor. It offers a 1/8 HP/94W...

Air mini compressor - HUSKY

The mini-spray guns from GAV is an auto-stop mini air-compressor. It offers a 1/8 HP/94W horsepower with a speed of 1720RPM. The compressor has a tank capacity of 2.5L and weighs 6kgs with a 90x150x330mm dimension. It also has a 20L/mln displacement and a noise of 58 decibels. Furthermore, it can withstand a maximum pressure of 5.5kg/cm2 or 78PSI.
HAUG Kompressoren AG

Helium compressor / nitrogen / SF6 / oxygen - 0.5 - 2.2 kW, 10 m³/h | SOG



The SOG range is used for recovery and secondary compression of gases such as helium, SF6, oxygen and nitrogen, as well as for secondary compression (boosting) of compressed air.
SOG compressors have the electric motor in the gas compartment. Power is supplied to the electric motor...

Helium compressor / nitrogen / SF6 / oxygen - 0.5 - 2.2 kW, 10 m³/h | SOG

The SOG range is used for recovery and secondary compression of gases such as helium, SF6, oxygen and nitrogen, as well as for secondary compression (boosting) of compressed air.
SOG compressors have the electric motor in the gas compartment. Power is supplied to the electric motor through a gas-tight connection in the pressure housing. This design has been developed in-house by Haug. and compacts the gas permanently without leaks (leak rate < 0.0001 mbar l/s). This hermetically sealed and completely wear-free drive was first employed by Haug in the SOG compressor in 1990 and can be used for suction pressures up to 20 bar.
There is also a built-in variant of the SOG compressor for OEM applications, without pipework or instrumentation, for integration into an OEM system.
The modular SOG compressor concept allows highly individual and cost-effective adaptation of the compressor configuration to the customer's requirements. This allows the development of technically, commercially and energetically optimum solutions.
The SOG compressor cannot be used for applications in potentially explosive atmospheres, e.g., according to the ATEX directive.
{{item.name}}