+7 (812) 645-08-06
Shielded metal arc welding power supplies (SMAW, MMA)
select brand
MMA welder - max. 130 A, max. ø 3.2 mm | SAXO 1300G
-High impact carry case complete with welding
accessories...
accessories...
MMA welder - max. 130 A, max. ø 3.2 mm | SAXO 1300G
-High impact carry case complete with welding
accessories and mask.
-Powerful and extra light: up to 130 A to weld
rutile, basic, stainless steel and special MMA
electrodes up to 3.2 diameter.
accessories and mask.
-Powerful and extra light: up to 130 A to weld
rutile, basic, stainless steel and special MMA
electrodes up to 3.2 diameter.
MMA welder - max. 160 A, max. ø 4 mm | SAXO 1600G
-Compatible with generators.
-Delivered ready to use...
-Delivered ready to use...
MMA welder - max. 160 A, max. ø 4 mm | SAXO 1600G
-Compatible with generators.
-Delivered ready to use with electrode holder
and earth clamp.
-Powerful: up to 160A to weld rutile, basic,
stainless steel and special MMA electrodes
up to 4.0 diameter
-Delivered ready to use with electrode holder
and earth clamp.
-Powerful: up to 160A to weld rutile, basic,
stainless steel and special MMA electrodes
up to 4.0 diameter
MMA welder - max. 180 A | PRESTO PFC
-Increased duty cycle
(180 A - 20% / 160 A - 30%)
-Increased motor generator
compatibility,...
(180 A - 20% / 160 A - 30%)
-Increased motor generator
compatibility,...
MMA welder - max. 180 A | PRESTO PFC
-Increased duty cycle
(180 A - 20% / 160 A - 30%)
-Increased motor generator
compatibility, due to PFC
controller
-Works with long primary cables
(70 m - 2.5 mm2 section)
-Excellent striking, Hot Start,
Anti Stick
-Welds all Type of electrodes
(except cellulosic)
(180 A - 20% / 160 A - 30%)
-Increased motor generator
compatibility, due to PFC
controller
-Works with long primary cables
(70 m - 2.5 mm2 section)
-Excellent striking, Hot Start,
Anti Stick
-Welds all Type of electrodes
(except cellulosic)
MMA welder - max. 160 A | PRESTO 190 PRO
The PRESTO 190 PRO offers top welding performance with the possibility to
adjust both the Arc Force and Hot Start parameters.
Maximum safety is ensured with the Voltage Reduction Device (VRD) making this
equipment suitable for demanding...
adjust both the Arc Force and Hot Start parameters.
Maximum safety is ensured with the Voltage Reduction Device (VRD) making this
equipment suitable for demanding...
MMA welder - max. 160 A | PRESTO 190 PRO
The PRESTO 190 PRO offers top welding performance with the possibility to
adjust both the Arc Force and Hot Start parameters.
Maximum safety is ensured with the Voltage Reduction Device (VRD) making this
equipment suitable for demanding...
adjust both the Arc Force and Hot Start parameters.
Maximum safety is ensured with the Voltage Reduction Device (VRD) making this
equipment suitable for demanding...
MMA welder - max. 220 A | PRESTO 220 VRD
A complete range of welding sets designed for heavy duty industrial
applications. The inverter technology provides light weight, reduced
dimensions and low power consumption, making the Presto range...
applications. The inverter technology provides light weight, reduced
dimensions and low power consumption, making the Presto range...
MMA welder - max. 220 A | PRESTO 220 VRD
A complete range of welding sets designed for heavy duty industrial
applications. The inverter technology provides light weight, reduced
dimensions and low power consumption, making the Presto range ideal for
every situation where portability, reliability and quality are required.
The VRD isolates the welding power supply
and supplies low voltage (14 V) to the
welding terminals in 0.01 seconds.
This feature allows PRESTO 220 VRD
to be used in all conditions without risk
of electric shock.
TIG LIFT + cycle starting
with slope up and slope
down regulation.
Suitable for all types of MMA electrodes,
including cellulosic.
Remote control plug on front panel.
Excellent arc control with adjustable Hot Start and Arc Force parameters.
applications. The inverter technology provides light weight, reduced
dimensions and low power consumption, making the Presto range ideal for
every situation where portability, reliability and quality are required.
The VRD isolates the welding power supply
and supplies low voltage (14 V) to the
welding terminals in 0.01 seconds.
This feature allows PRESTO 220 VRD
to be used in all conditions without risk
of electric shock.
TIG LIFT + cycle starting
with slope up and slope
down regulation.
Suitable for all types of MMA electrodes,
including cellulosic.
Remote control plug on front panel.
Excellent arc control with adjustable Hot Start and Arc Force parameters.
MMA welder / inverter / single-phase - 130 A | Novastick 1400
The 10-1 Novastick 1400 model, manufactured by Sincosald, is a STICK electrode inverter power...
MMA welder / inverter / single-phase - 130 A | Novastick 1400
The 10-1 Novastick 1400 model, manufactured by Sincosald, is a STICK electrode inverter power source generally equipped with electronic adjustment. This power source has a welding current of about 130 A - 30%. In addition, the feeding system of this device is single-phase feeding 230V.
The dimensions of this device measure 330 x 135 x 230mm.
The dimensions of this device measure 330 x 135 x 230mm.
MMA welder / inverter / single-phase - 150 A | Novastick 1600
The 10-2 Novastick 1600, manufactured by Sincosald, is a STICK electrode inverter power...
MMA welder / inverter / single-phase - 150 A | Novastick 1600
The 10-2 Novastick 1600, manufactured by Sincosald, is a STICK electrode inverter power source generally equipped with electronic adjustment. This power source has a welding current of about 150 A - 30%. In addition, its feeding system is single-phase feeding 230V.
The dimension of this device measures 330 x 135 x 230mm.
The dimension of this device measures 330 x 135 x 230mm.
MMA welder / inverter / single-phase - 160 A | Novastick 1700 G
The 10-4 Novastick 1700 G model, manufactured by Sincosald, is a STICK electrode inverter...
MMA welder / inverter / single-phase - 160 A | Novastick 1700 G
The 10-4 Novastick 1700 G model, manufactured by Sincosald, is a STICK electrode inverter power source generally equipped with electronic adjustment . This power source has a welding current of about 160 A - 20%. In addition, the feeding system of this device is single-phase feeding 230V.
The dimensions of this device measure 330 x 165 x 230mm.
The dimensions of this device measure 330 x 165 x 230mm.
MMA welder / inverter / single-phase - 200 A | Novastick 2000
The 10-5 Novastick 2000 , manufactured by Sincosald, is a STICK electrode inverter power...
MMA welder / inverter / single-phase - 200 A | Novastick 2000
The 10-5 Novastick 2000 , manufactured by Sincosald, is a STICK electrode inverter power source generally equipped with electronic adjustment. This power source has a welding current of about 200 A - 20%. In addition, its feeding system is single-phase feeding 230V.
The dimension of this device measures 330 x 135 x 230mm.
The dimension of this device measures 330 x 135 x 230mm.
MMA welder / inverter / three-phase - 250 A | Novastick 300
The 10-6 Novastick 321 is a STICK electrode inverter power supply...
MMA welder / inverter / three-phase - 250 A | Novastick 300
The 10-6 Novastick 321 is a STICK electrode inverter power supply designed with an electronic adjustment feature. It has a welding current of A 250 to 60% and utilizes 400 V of 3-phase feeding processes. This power source has a diameter of 670 mm x 270 mm x 415 mm.
MMA welder / single-phase / inverter - 10 - 110 A | COTT 135
The COTT models are highly versatile INVERTER welding machines for coated...
MMA welder / single-phase / inverter - 10 - 110 A | COTT 135
Welding of all types of coated electrodes.
Metal constructions in multiple household applications, maintenance and repair.
Main features:
COTT models are INVERTER welding equipment of coated electrodes that stand out for their high versatility and wide range of applications. This range reaches surprising values in terms of its relationship weight-volume-performance, being
useful both for private work, as well as for maintenance in the industry.
3.5 kg, which are extremely compact and portable.
Maximum reliability and resistance thanks to its doublehousing construction.
Ease of use thanks to the INVERTER technology that supplies DC current.
Minimum consumption through its high energy efficiency.
Equipped with Anti-stick, Arc-Force devices and Hot-Start.
Connectable to generators with a wide voltage range.
Metal constructions in multiple household applications, maintenance and repair.
Main features:
COTT models are INVERTER welding equipment of coated electrodes that stand out for their high versatility and wide range of applications. This range reaches surprising values in terms of its relationship weight-volume-performance, being
useful both for private work, as well as for maintenance in the industry.
3.5 kg, which are extremely compact and portable.
Maximum reliability and resistance thanks to its doublehousing construction.
Ease of use thanks to the INVERTER technology that supplies DC current.
Minimum consumption through its high energy efficiency.
Equipped with Anti-stick, Arc-Force devices and Hot-Start.
Connectable to generators with a wide voltage range.
MMA welder / single-phase / inverter - 10 - 130 A | COTT 145
The COTT models are regarded as highly versatile INVERTER welding machines...
MMA welder / single-phase / inverter - 10 - 130 A | COTT 145
The COTT models are regarded as highly versatile INVERTER welding machines for coated electrodes specially designed to meet a wide-range of applications. the ightweight, compact range includes multitude of features making it suitable for smaller-scale tasks and industrial maintenance work.