+7 (812) 645-08-06
Shielded metal arc welding power supplies (SMAW, MMA)
select brand
MMA welder / TIG / single-phase / DC - 5 - 155A | Invertec® V155-S
The auto reconnect input power for this model is 120/230V and is one of the most important features of this product. The weight is impressive, being less than 15lbs...
MMA welder / TIG / single-phase / DC - 5 - 155A | Invertec® V155-S
The auto reconnect input power for this model is 120/230V and is one of the most important features of this product. The weight is impressive, being less than 15lbs (6.8kg), while the Touch Start TIG DC operation is intuitive and allows for the easy striking of the arc without tungsten contamination or high frequency.
The Auto Adaptive Arc Force technology ensures minimal electrode sticking in the puddle, without any compromises in terms of stability of the arc or increased spatter. Finally, the item is ideal for use with popular Lincoln electrodes, including Fleetweld 35, 37 and 180, as well as the 7018 MR series from Excalibur.
The Auto Adaptive Arc Force technology ensures minimal electrode sticking in the puddle, without any compromises in terms of stability of the arc or increased spatter. Finally, the item is ideal for use with popular Lincoln electrodes, including Fleetweld 35, 37 and 180, as well as the 7018 MR series from Excalibur.
MMA welder / AC / single-phase / DC - 40 - 225 A | AC225
There are numerous features associated with the use of this stick welder. The item is easy to operate, supporting a full range between...
MMA welder / AC / single-phase / DC - 40 - 225 A | AC225
There are numerous features associated with the use of this stick welder. The item is easy to operate, supporting a full range between 40 and 225amp, changeable using a selector switch. The smooth arc that is part of the design makes the item easy to weld, while the 225amp AC output is enough for diameters of 4.8mm, along with general purpose mild steel electrodes.
The item is easy to install and comes with attached input power cables. The UL listing and CSA approval, along with the NEMA rating are other advantages.
The item is easy to install and comes with attached input power cables. The UL listing and CSA approval, along with the NEMA rating are other advantages.
MMA welder / single-phase / DC / AC - 30 - 225 A | AC/DC 225/125
The AC/DC 225/125 is a stick welder manufactured by Lincoln Electric. Its key...
MMA welder / single-phase / DC / AC - 30 - 225 A | AC/DC 225/125
The AC/DC 225/125 is a stick welder manufactured by Lincoln Electric. Its key features include a front mounted AC/DC polarity switch that provides a simple operation; a smooth arc that allows a convenient welding of different electrodes; a 125 amp DC output; a 225 amp AC output; and a CSA approval.
MMA welder / TIG / three-phase / single-phase - 5 - 275 A | Invertec® V275-S
Invertec® V275-S is a power source that was designed for construction site rigors. The item is rated IP23S and is equipped with various weather-resistant features. The power source supports the Stick and TIG...
MMA welder / TIG / three-phase / single-phase - 5 - 275 A | Invertec® V275-S
Invertec® V275-S is a power source that was designed for construction site rigors. The item is rated IP23S and is equipped with various weather-resistant features. The power source supports the Stick and TIG...
MMA welder / TIG / three-phase / single-phase - 5 - 275 A | Invertec® V275-S (Tweco)
The INVERTEC® V275-S Stick Welder (TWECO)introduced by Donaldson features changing arc force that ensures a soft or crisp...
MMA welder / TIG / three-phase / single-phase - 5 - 275 A | Invertec® V275-S (Tweco)
The INVERTEC® V275-S Stick Welder (TWECO)introduced by Donaldson features changing arc force that ensures a soft or crisp...
Submerged welder / arc - 350 - 1 250 A | Subarc series
Miller Subarc AC/DC Series are three-phase squarewave AC/DC power sources with high output. They supply...
Submerged welder / arc - 350 - 1 250 A | Subarc series
Miller Subarc AC/DC Series are three-phase squarewave AC/DC power sources with high output. They supply AC or DC welding power in standalone or multi-arc designs.
They are ideal for prolonged, uninterrupted welds for making pipe, thin cladding overlays within huge pressure vessels, or thick structural weldments. They provide superior depositing, penetrating and heat input control.
They are ideal for prolonged, uninterrupted welds for making pipe, thin cladding overlays within huge pressure vessels, or thick structural weldments. They provide superior depositing, penetrating and heat input control.
MMA welder / single-phase / inverter - 10 - 130 A | MINIARC 3.2Gi
Oerlikon MINIARC series of power sources has been developed for welding with MMA electrodes. It is suitable for maintenance and repair for both industrial...
MMA welder / single-phase / inverter - 10 - 130 A | MINIARC 3.2Gi
Oerlikon MINIARC series of power sources has been developed for welding with MMA electrodes. It is suitable for maintenance and repair for both industrial and lighter requirement. It uses inverter technology, which results in lower weight and dimensions thereby increasing flexibility. It has PCB protection, which has been developed specifically for generator use.
It has Inverter Power Microcontroller or IPM inside. This simplifies welding with MMA electrodes in every position. The IPM technology makes striking easier with Hot Star, and simplifies control of Arc stability with Arc Force.
It has Inverter Power Microcontroller or IPM inside. This simplifies welding with MMA electrodes in every position. The IPM technology makes striking easier with Hot Star, and simplifies control of Arc stability with Arc Force.
MMA welder / inverter / single-phase - 180 A | CITOARC HPF
The MMA Welding Set has a high duty cycle at 180 A - 20% / 160 A - 40%. It is compatible to a motor generator because it is equipped with a HPF controller. It can...
MMA welder / inverter / single-phase - 180 A | CITOARC HPF
The MMA Welding Set has a high duty cycle at 180 A - 20% / 160 A - 40%. It is compatible to a motor generator because it is equipped with a HPF controller. It can use with really long cables with maximum length of 70 m - 2.5 mm2 section. It has a lower consumption and higher reliability. It is equipped with a fitted Shuko plug and uses a domestic plug with 15 A fuse. The number of components is lessened to lower the risk of defects. It has a modular technology and the quality of the components are controlled at the source. It has a robust frame for increased protection. The thermal sensor of the module allows improved monitoring.
MMA welder - 5 - 160 A | CITOARC 1900 EXPERT
The CITOARC 1900 EXPERT is suitable for comprehensive amounts of work loads, and welding MMA electrodes like cellulosic....
MMA welder - 5 - 160 A | CITOARC 1900 EXPERT
The CITOARC 1900 EXPERT is suitable for comprehensive amounts of work loads, and welding MMA electrodes like cellulosic. It is equipped with Voltage Reduction Device (VRD), and makes it adaptable to operate in difficult areas such as shipyards, petrochemical plants and mining.
This machine is designed to adjust and operate Hot Start and Arc Force controls, with the integration of a microprocessor. It has a strong arc, despite of a decreasing power supply.
This machine is designed to adjust and operate Hot Start and Arc Force controls, with the integration of a microprocessor. It has a strong arc, despite of a decreasing power supply.
MMA welder - 5 - 220 A | CITOARC 2200i
The CITOARC range is a series of welding sets which are specifically constructed for various industrial applications. It is built through its inverter...
MMA welder - 5 - 220 A | CITOARC 2200i
The CITOARC range is a series of welding sets which are specifically constructed for various industrial applications. It is built through its inverter technology which allows it to produce low energy consumption. This is attained through isolating the welding power supply, allowing it to provide a voltage rate of 14 V to its welding stations within the span of 0.1 s.
The series offers light weight machines which are all integrated with minimized dimensions. These machines are all ideal and suitable for all kinds of MMA electrodes which encompasses the cellulosic.
The series offers light weight machines which are all integrated with minimized dimensions. These machines are all ideal and suitable for all kinds of MMA electrodes which encompasses the cellulosic.
MMA welder / TIG / MIG - max. 10 - 630 A | CITOROD XT series
The CITOROD XT range introduced by Oerlikon is a heavy duty tool suitable for welding...
MMA welder / TIG / MIG - max. 10 - 630 A | CITOROD XT series
The CITOROD XT range introduced by Oerlikon is a heavy duty tool suitable for welding...