+7 (812) 645-08-06
Bonded abrasives, grinding wheels
select brand
Diamond grinding wheel
Diamond grinding wheels are used for machining short-chipping materials such as ceramic, glass, stone, carbide, concrete, hard plastic,...
Diamond grinding wheel
Diamond grinding wheels are used for machining short-chipping materials such as ceramic, glass, stone, carbide, concrete, hard plastic, carbide/steel composite etc. The units are sensitive to heat and they produce a chemical reaction to iron within the normal machining temperature range thus restricting the use of diamond to non-ferrous materials. The wheels work at a density of 3.62 g/cm; hardness: 7000 Knoop, 10 Mohs; and maximum heat resistance of 650 degrees C. If the wrong grit type is used for machining the result is unsatisfactory.
CBN grinding wheel
The CBN grinding wheel model is manufactured by Weiss, and has a small hardness for all materials of HRC 45 including tool steel,...
CBN grinding wheel
The CBN grinding wheel model is manufactured by Weiss, and has a small hardness for all materials of HRC 45 including tool steel,...
Diamond dressing wheel
The unit is manufactured by Weiss Ag, and is a turning diamond dressing tool that has been specifically developed to be used in a...
Diamond dressing wheel
The unit is manufactured by Weiss Ag, and is a turning diamond dressing tool that has been specifically developed to be used in a number of operations. These operations includes dressing of both resin-bond and vitrified CBN-type and diamond grinding wheels. It can also be used in circular grinding equipment. The unit is used to clamp in between center points.
The model has a rated grinding wheel speed that ranges from 25 m/s up to 30 m/s. It also has a rated dresser shaft speed of up to 150 U/min.
The model has a rated grinding wheel speed that ranges from 25 m/s up to 30 m/s. It also has a rated dresser shaft speed of up to 150 U/min.
Corundum grinding wheel
These corundrum grinding wheels are ideally used for applications such as surface, circular,...
Corundum grinding wheel
These corundrum grinding wheels are ideally used for applications such as surface, circular, tool, tooth flank, and thread grinding. It is also compatible with other spring end grinding and special grinding processes. The tools are also produces in a variety of dimensions and sizes which are shaped to meet the customer's requirements.
Grinding wheel / silicon carbide
WEISS presents silicon carbide grinding wheels. They are used in several applications like surface grinding,...
Grinding wheel / silicon carbide
WEISS presents silicon carbide grinding wheels. They are used in several applications like surface grinding, circular grinding, tool grinding, tooth flank grinding, and thread grinding. They are ideal for spring end grinding as well as other special grinding techniques.
The wheels help in manufacturing of grinding tools in all shapes and sizes. The shape and compound are adjusted to suit the application.
The wheels help in manufacturing of grinding tools in all shapes and sizes. The shape and compound are adjusted to suit the application.
Diamond honing tool - ø 6.35 - 25 mm | Single Stroke Honing®
Sunnen Products Company offers the high production helix Single Stroke Honing® tool, suited for medium and high production bore sizing. The design of Sunnen's high production helix electroplated diamond Single...
Diamond honing tool - ø 6.35 - 25 mm | Single Stroke Honing®
Sunnen Products Company offers the high production helix Single Stroke Honing® tool, suited for medium and high production bore sizing. The design of Sunnen's high production helix electroplated diamond Single...
Diamond honing tool - max. ø 52.2 mm | Single Stroke®
The Single Stroke Honing® Tools only require D8 400 grit diamond finishing sleeves and D5 220 grit diamond roughing sleeves for most applications. Many of the...
Diamond honing tool - max. ø 52.2 mm | Single Stroke®
The Single Stroke Honing® Tools only require D8 400 grit diamond finishing sleeves and D5 220 grit diamond roughing sleeves for most applications. Many of the...
Diamond honing tool - max. ø 63.25 - 63.75 mm | CGT, CRT
The CGT and CRT tools are plated diamond and coarse-grained for prolonged life. They can...
Diamond honing tool - max. ø 63.25 - 63.75 mm | CGT, CRT
The CGT and CRT tools are plated diamond and coarse-grained for prolonged life. They can size and finish numerous parts within 50 millionth of an inch size variation if used in the Sunnen CGM-1000, CGM-5000, KGM-1000 and KGM-5000. These tools cover a scope of .215'' to 1.260'' and tools larger that 1.260'' and smaller than .215'' are in stock.
Diamond honing tool - max. ø 88 - 90 mm | SRT
The SRT series from Sunnen is a production rod reconditioning tool that is especially...
Diamond honing tool - max. ø 88 - 90 mm | SRT
The SRT series from Sunnen is a production rod reconditioning tool that is especially designed with a size range from 33/37 mm up to 88/90 mm. It is capable of sizing and finishing various connecting roads with the help of the ML-3500 and EC-3500.
These expandable honing tools are also superabrasive to ensure durability.
These expandable honing tools are also superabrasive to ensure durability.
Honing tool
The External Honing manufactured by Sunnen is a tool that is utilized in removing the "cloverleaf" center-less grind...
Honing tool
The External Honing manufactured by Sunnen is a tool that is utilized in removing the "cloverleaf" center-less grind pattern and chatter marks. It is suggested for any component including hardened steel, carbide, ceramic and glass. The unit is suitable for low production, tool room, salvage, and maintenance requisitions. The unit is faster, cleaner, and more reliable than lapping. It has I.D range for sizing and finishing of 3 mm- 115 mm and an external hone with I.D. range of 3 mm- 70 mm.
Grinding wheel / diamond resin bonded
These metal and resin bonded tools are ideally used for applications that are concerned...
Grinding wheel / diamond resin bonded
These metal and resin bonded tools are ideally used for applications that are concerned with bevelling machines like straight line, contouring, manual or CNC units. The range of high quality resin-bonded grinding wheels manufactured by Pomdi are usable for systems that utilize straight line machines which are for quality bevel production.
Edging wheel for glass
Cup type or peripheral grinding wheels used in this kind of manufacture. Just as with beveling, metal and resin-bonded grinding wheels are utilized. Straight-line, variable-angle edging machines and bilateral edging...
Edging wheel for glass
Cup type or peripheral grinding wheels used in this kind of manufacture. Just as with beveling, metal and resin-bonded grinding wheels are utilized. Straight-line, variable-angle edging machines and bilateral edging machines use cup wheels. POMDI offers 4 types of cup grinding wheels:
The mitre grinding wheels have an extremely thick diamond layer and are used in position 1 on variable-angle machines. L & M grinding wheels are a leading products because of their particularly high-performance grinding wheels and they are used to work all types of glass types including monolithic and laminated.
The continuous grinding wheels are the standard metal-bonded and continuous-rim wheels. The resin grinding wheels come in both flat and turbo versions and they are used in machines intended to attain the highest finish quality.
The mitre grinding wheels have an extremely thick diamond layer and are used in position 1 on variable-angle machines. L & M grinding wheels are a leading products because of their particularly high-performance grinding wheels and they are used to work all types of glass types including monolithic and laminated.
The continuous grinding wheels are the standard metal-bonded and continuous-rim wheels. The resin grinding wheels come in both flat and turbo versions and they are used in machines intended to attain the highest finish quality.
Diamond grinding wheel / glass / for the automotive industry
The Prismatic is specifically made to be used for bevelling interior rear-view...
Diamond grinding wheel / glass / for the automotive industry
The Prismatic is specifically made to be used for bevelling interior rear-view mirrors. It is a high quality cup grinding wheel unit which is ideally built with 9- tool sets which comprises of a 4 metal- bonded and 5 resin- bonded grinding wheels which is mainly used for very specific purposes.
Metal binder grinding wheel / flat glass -
This grinding wheel is developed by Pomdi. It is a peripheral metal bonded grinding wheel...
Metal binder grinding wheel / flat glass -
This grinding wheel is developed by Pomdi. It is a peripheral metal bonded grinding wheel with metal bonded layers. This enables working at high feed speeds, high peripheral velocity and with extraordinary profile resistance to be able to deliver a sanded edge finish. In addition, this type of grinding wheel comes with a very thick diamond layer.
Low-profile wheel grinding wheel / vacuum-brazed
Pomdi - Herramientas De Diamante SA offers low-profile grinding wheels. These grinding...
Low-profile wheel grinding wheel / vacuum-brazed
Pomdi - Herramientas De Diamante SA offers low-profile grinding wheels. These grinding wheels are vacuum brazed, and are used to produce curves on mineral (glass), CR39, polycarbonate and Trivex lenses. Modern equipment uses PCD cutters or PCD tools to mill organic lenses. These tools have high level of accuracy and robustness.