+7 (812) 645-08-06
Hydraulic pumps
select brand
Hydraulic pump / manual - 50 MPa (7 250 psi) | TMJL 50
Hydraulic pump TMJL 50, 50 MPa - (7,250 psi) is designed for low pressure side of the SKF OK connectors, but it is equally appropriate to use with the pressure requirement of 50 MPa (7,250 psi). A 3,000...
Hydraulic pump / manual - 50 MPa (7 250 psi) | TMJL 50
Hydraulic pump TMJL 50, 50 MPa - (7,250 psi) is designed for low pressure side of the SKF OK connectors, but it is equally appropriate to use with the pressure requirement of 50 MPa (7,250 psi). A 3,000...
Hydraulic pump / manual - 100 MPa (14 500 psi) | 729124
Hydraulic pump 729124 100 MPa (14500 psi) can be used with hydraulic nuts equal or smaller than HMV 54E. It can also be used in the applications where mounting and dismounting bearings and components are needed with a maximum...
Hydraulic pump / manual - 100 MPa (14 500 psi) | 729124
Hydraulic pump 729124 100 MPa (14500 psi) can be used with hydraulic nuts equal or smaller than HMV 54E. It can also be used in the applications where mounting and dismounting bearings and components are needed with a maximum pressure of 100 MPa (14500 psi).
This pump comes with a 150 cm (59 in) pressure hose, pressure gauge, matting nipple and quick coupling. It is filled with the LHMF 300 SKF Mounting Fluid and an additional liter of the fluid comes as a reserve. If the quick coupling or the nipple can’t be used (like with AOH sleeves) we have a specially designed version of this pump named 729124 A.
It has an oil container with a capacity of 250 cubic centimeters (15 cubic inches), an extra liter of mounting fluid, and it is packed in a protective case. One stroke of this pump delivers 0.5 cubic centimeters of fluid. It has 3.5 kilograms in weight.
This pump comes with a 150 cm (59 in) pressure hose, pressure gauge, matting nipple and quick coupling. It is filled with the LHMF 300 SKF Mounting Fluid and an additional liter of the fluid comes as a reserve. If the quick coupling or the nipple can’t be used (like with AOH sleeves) we have a specially designed version of this pump named 729124 A.
It has an oil container with a capacity of 250 cubic centimeters (15 cubic inches), an extra liter of mounting fluid, and it is packed in a protective case. One stroke of this pump delivers 0.5 cubic centimeters of fluid. It has 3.5 kilograms in weight.
Hydraulic pump / manual - TMJL 100
The SKF TMJL 100 is a Hydraulic pump that is used for mounting and dismounting bearings or components. It is applicable for oil injecting operations that needs up to 100 MPa (14...
Hydraulic pump / manual - TMJL 100
The SKF TMJL 100 is a Hydraulic pump that is used for mounting and dismounting bearings or components. It is applicable for oil injecting operations that needs up to 100 MPa (14 500 psi) of pressure. The pump is integrated with an an oil container with the capacity to hold up to 800 cm3 of fluid. It also has a 3000 mm pressure hose, quick connect coupling, mating nipple, and a pressure gauge that is all compacted in a sturdy protective case. The pump is filled with SKF mounting fluid LHMF 300 and is supplied with an extra litre of fluid. This device is suitable for use with hydraulic nuts smaller than or equal to HMV 92E in size. It may also be coupled with the SKF hydraulic assisted pullers TMHP series.
Hydraulic pump / manual - 150 MPa (21 750 psi) | 728619 E
The 728619E two-stage hydraulic pump is ideal for use with the SKF Supergrip bolts. It is also suitable for mounting and dismounting of components or bearings that require...
Hydraulic pump / manual - 150 MPa (21 750 psi) | 728619 E
The 728619E two-stage hydraulic pump is ideal for use with the SKF Supergrip bolts. It is also suitable for mounting and dismounting of components or bearings that require...
Mounting pump / dismounting / manual / oil pressure - 300 - 400 MPa (43 500 - 58 000 psi) | 226400 E series
The 226400 range of oil injectors is designed for a wide range of applications. Specifically, they are used for installing and uninstalling railway wheels, fly wheels, couplings, bearings, gear wheels,...
Mounting pump / dismounting / manual / oil pressure - 300 - 400 MPa (43 500 - 58 000 psi) | 226400 E series
The 226400 range of oil injectors is designed for a wide range of applications. Specifically, they are used for installing and uninstalling railway wheels, fly wheels, couplings, bearings, gear wheels, ship propellers and the like. An oil reservoir in a carrying case facilitates to supply the injector. The unit may either be attached to an adapter block and become a floor standing model, or be directly installed onto a workpiece. When used as a standing system, it becomes more ideal for use with pressure gauges and high pressure pipes.
This range offers either 300 MPa (43,500 psi) or 400 MPa (58,000) models. Additional features and enhancements, such as an adapter block, connecting nipple units, pressure gauges and high pressure pipes, are available for selection.
This range offers either 300 MPa (43,500 psi) or 400 MPa (58,000) models. Additional features and enhancements, such as an adapter block, connecting nipple units, pressure gauges and high pressure pipes, are available for selection.
Hydraulic pump / manual - max. 1000 bar
The PUMP1000-0,7L range of single stage hand pumps are capable of producing...
Hydraulic pump / manual - max. 1000 bar
The PUMP1000-0,7L range of single stage hand pumps are capable of producing up to 1,000 bar (14,504 psi) of pressure. The pump system is equipped with an oil container with 0.7 liter (0.18 gallons) of container volume. As an added enhancement, a digital manometer may be provided with the pump model.
Hydraulic pump / manual / two-speed - 30 - 1000 bar
The twin stage pumps, have a high conveyance rate up to 50 bars and after that they switch naturally to the high weight stage. This gives...
Hydraulic pump / manual / two-speed - 30 - 1000 bar
The twin stage pumps, have a high conveyance rate up to 50 bars and after that they switch naturally to the high weight stage. This gives a high work rate. With an expanded oil prerequisite, the twin stage pumps are accessible with a 8 l oil compartment. In those situations where the sort of establishment of the connector or withdrawal sleeve obliges a different oil supply, a two-way valve is accessible.
For pumps with an oil weight of 1000 bars and a connector, advanced manometers are likewise accessible as additional attachments.
For pumps with an oil weight of 1000 bars and a connector, advanced manometers are likewise accessible as additional attachments.
Hydraulic pump / high-pressure / manual - max. 1000 bar
The PUMP1000-4L-CONTROL hand pump is a perfect device to generate pressure because the rolling bearings use hydraulic nut to drive against their tapering base. In the first phase, the bearing moves...
Hydraulic pump / high-pressure / manual - max. 1000 bar
The PUMP1000-4L-CONTROL hand pump is a perfect device to generate pressure because the rolling bearings use hydraulic nut to drive against their tapering base. In the first phase, the bearing moves smoothly on the tapered base, and then the hydraulic nut is screwed against the shaft to connect the hand pump. The hand pump works to get the appropriate pressure required to reach the starting position. The pump also drives bearing at the compulsory drive-up distance to achieve the final position.
The operations of PUMP1000-4L-CONTROL can be easily understand with the user manual that contains a table to display the required number of strokes to get the required drive-up distance of the bearing. The distance is calculated with the help of software Mounting Manager.
The operations of PUMP1000-4L-CONTROL can be easily understand with the user manual that contains a table to display the required number of strokes to get the required drive-up distance of the bearing. The distance is calculated with the help of software Mounting Manager.
Mounting pump / dismounting / manual / oil pressure - max. 2500 bar
The high pressure pump, is suitable for the mounting and getting off of moving head for shaft measurements up to 250 mm. Because of the high oil weight accessible, the...
Mounting pump / dismounting / manual / oil pressure - max. 2500 bar
The high pressure pump, is suitable for the mounting and getting off of moving head for shaft measurements up to 250 mm. Because of the high oil weight accessible, the pump can additionally be utilized to stretch and mount overwhelming shaft couplings and apparatuses by method for the water driven technique.
The high pressure pump might be associated specifically or by a method for thick-walled connectors. It can additionally be associated by method for a pump holder and a 2 m long adaptable high pressure channel. The oil weight for this situation should not surpass 2 500 bars. It is recommended to operate the pump together with a manometer.
The high pressure pump might be associated specifically or by a method for thick-walled connectors. It can additionally be associated by method for a pump holder and a 2 m long adaptable high pressure channel. The oil weight for this situation should not surpass 2 500 bars. It is recommended to operate the pump together with a manometer.