+7 (812) 645-08-06
Electrical safety barriers
select brand
Zener barrier - 105 x 12.6 x 82 mm | BARRIERAMTL
The Barrieramtl, manufactured by Laumas, is a passive fail-safe...
Zener barrier - 105 x 12.6 x 82 mm | BARRIERAMTL
The Barrieramtl, manufactured by Laumas, is a passive fail-safe zener barrier that has been ATEX II (1) GD approved. It has a dimension of 105mm x 12.6mm x 82mm (L x W x H). Furthermore, it has a modular omega or DIN rail mounting.
Explosion-proof Zener barrier - max. 250 V, -20 °C ... +50 °C | LB800 series
The safe barrier is widely used for metallurgy, chemi-industry,...
Explosion-proof Zener barrier - max. 250 V, -20 °C ... +50 °C | LB800 series
The safe barrier is widely used for metallurgy, chemi-industry, medicine fields which needs to do explosion-proof protection. It could be connected with intrinsic safe version transmitter to form explosion-proof system.
Intrinsically safe electrical safety barrier / sensor - 20 ... +30 VDC | DAT5030 series
The DAT 5030 series tool is galvanic solitary integral security barrier that acts as a corresponding equipment. Its input ranges between 4-20 mA existing rings with active and passive modes along with an auxiliary energy storage...
Intrinsically safe electrical safety barrier / sensor - 20 ... +30 VDC | DAT5030 series
The DAT 5030 series tool is galvanic solitary integral security barrier that acts as a corresponding equipment. Its input ranges between 4-20 mA existing rings with active and passive modes along with an auxiliary energy storage that can be accessed to provide the existing ring while working in harmful spaces (ZONE 0).
The quantity is transformed into an output as a voltage indicator (0-10V or 2-10V) or existing indicator (0-20mA or 4-20mA). Additionally, the input and output value can be positioned using a dip-button situated on the side of the seal. The calibration of the tool is created using a trimmer (ZERO and SPAN) that is accessible on each side of the sealing.
Additionally, the DAT 5030 consists of a three-way correspondence including an input that is 2000 Vac isolated from power supply, output, power supply and output with 1500 Vac isolated between them.
The quantity is transformed into an output as a voltage indicator (0-10V or 2-10V) or existing indicator (0-20mA or 4-20mA). Additionally, the input and output value can be positioned using a dip-button situated on the side of the seal. The calibration of the tool is created using a trimmer (ZERO and SPAN) that is accessible on each side of the sealing.
Additionally, the DAT 5030 consists of a three-way correspondence including an input that is 2000 Vac isolated from power supply, output, power supply and output with 1500 Vac isolated between them.