+7 (812) 645-08-06
Wind turbines
select brand
Vertical-axis wind turbine - 15 - 60 kW
MARIAH turbines are Omni-Directional and do not have to orientate into the wind.
Vertical blades have no time-dependent...
Vertical blades have no time-dependent...
Vertical-axis wind turbine - 15 - 60 kW
MARIAH turbines are Omni-Directional and do not have to orientate into the wind.
Vertical blades have no time-dependent gravity loads, like horizontal propellers. Drive train, generators, operating parts are easily accessible for repair and maintenance.
Simplicity of design, ease of installation, and limited custom parts and components translate to significantly lower purchase and installation costs, lower operating costs, and lower cost of energy produced.
Vertical blades have no time-dependent gravity loads, like horizontal propellers. Drive train, generators, operating parts are easily accessible for repair and maintenance.
Simplicity of design, ease of installation, and limited custom parts and components translate to significantly lower purchase and installation costs, lower operating costs, and lower cost of energy produced.
Vertical-axis wind turbine - 100 - 500 kW
Mariah Energys engineers and designers have designed and built wind turbine systems for the Department of Agriculture, Department of Energy, and private industry for the past 30 years. The technology impact for the total industry...
Vertical-axis wind turbine - 100 - 500 kW
Mariah Energys engineers and designers have designed and built wind turbine systems for the Department of Agriculture, Department of Energy, and private industry for the past 30 years. The technology impact for the total industry has been enormous, and today, the Mariah Energy Development Corporation continues to upgrade technology designs into its cost effective high performance wind turbine systems with many new innovations made possible by mechanical, electronic, and computer technologies not previously available.
Mariahs ongoing objective is to introduce practical though innovative commercial wind energy systems into the marketplace through ongoing R&D, design and development leading to the most cost effective and efficient wind energy systems possible in the industry. Consequently Mariahs vertical axis wind turbines are the most economical and energy efficient systems available today.
Mariahs ongoing objective is to introduce practical though innovative commercial wind energy systems into the marketplace through ongoing R&D, design and development leading to the most cost effective and efficient wind energy systems possible in the industry. Consequently Mariahs vertical axis wind turbines are the most economical and energy efficient systems available today.
Vertical-axis wind turbine - 2 500 kW
MARIAHs continuing focus on improving existing vertical axis wind turbine technology developed by the companys predecessors has led to a highly efficient system deliverable at lower cost, easier to...
Vertical-axis wind turbine - 2 500 kW
MARIAHs continuing focus on improving existing vertical axis wind turbine technology developed by the companys predecessors has led to a highly efficient system deliverable at lower cost, easier to maintain and less costly to operate than current horizontal axis wind turbines. The newest commercial system is scheduled for introduction in 2012, and is capable of producing up to 2.5 megawatts of power. Like the Mid Range systems, the 2.5 Mw turbine utilizes a new aerodynamic three-blade configuration, mounted on a new, heavy duty, easy to install tower.
The companys proprietary new design significantly improves wind turbine performance and efficiency beyond virtually all current horizontal axis wind turbines, using numerous breakthrough innovations unique to the industry:
The companys proprietary new design significantly improves wind turbine performance and efficiency beyond virtually all current horizontal axis wind turbines, using numerous breakthrough innovations unique to the industry:
Low-power wind turbine - 600 W | e160i
Available in 12, 24, 48 and 200 Vdc
* COMPLETE SOLUTION FOR SMALL POWER REQUIREMENTS
* Charging batteries
* Power the national...
* COMPLETE SOLUTION FOR SMALL POWER REQUIREMENTS
* Charging batteries
* Power the national...
Low-power wind turbine - 600 W | e160i
Available in 12, 24, 48 and 200 Vdc
* COMPLETE SOLUTION FOR SMALL POWER REQUIREMENTS
* Charging batteries
* Power the national grid
* Boost hybrid systems for increased energy efficiency
The e160i is compact and virtually silent as it generates energy. Rotation speed is controlled by rotor turbulence, which accounts for the 6 blade design and its quiet efficiency that can save fuel costs and replaces noisy generators. The e160i is installed around the world powering public lighting, railway switching and radio towers as well as educating children.
* COMPLETE SOLUTION FOR SMALL POWER REQUIREMENTS
* Charging batteries
* Power the national grid
* Boost hybrid systems for increased energy efficiency
The e160i is compact and virtually silent as it generates energy. Rotation speed is controlled by rotor turbulence, which accounts for the 6 blade design and its quiet efficiency that can save fuel costs and replaces noisy generators. The e160i is installed around the world powering public lighting, railway switching and radio towers as well as educating children.
Small wind turbine - 800 W | e230i
e230i (800W)
Available in 12, 24, 48, 110 and 200 Vdc
* OFF-GRID ELECTRICITY SUPPLY
* Charging batteries
* Power water pumps
* Supply the national...
Available in 12, 24, 48, 110 and 200 Vdc
* OFF-GRID ELECTRICITY SUPPLY
* Charging batteries
* Power water pumps
* Supply the national...
Small wind turbine - 800 W | e230i
e230i (800W)
Available in 12, 24, 48, 110 and 200 Vdc
* OFF-GRID ELECTRICITY SUPPLY
* Charging batteries
* Power water pumps
* Supply the national grid
* Boost hybrid systems for increased energy efficiency
The e230i is a distinctive 3 blade turbine that has a low start up torque, increasing its efficiency. The axial flux permanent magnet brushless alternator is powered by an optimised three blade rotor, with patented pitch control. The e230i maintains rated output in excess wind speeds, optimising the potential power output and energy yield.
The e230i is used predominantly on farms and rural installations for power where there is no grid connection available.
Available in 12, 24, 48, 110 and 200 Vdc
* OFF-GRID ELECTRICITY SUPPLY
* Charging batteries
* Power water pumps
* Supply the national grid
* Boost hybrid systems for increased energy efficiency
The e230i is a distinctive 3 blade turbine that has a low start up torque, increasing its efficiency. The axial flux permanent magnet brushless alternator is powered by an optimised three blade rotor, with patented pitch control. The e230i maintains rated output in excess wind speeds, optimising the potential power output and energy yield.
The e230i is used predominantly on farms and rural installations for power where there is no grid connection available.
Small wind turbine - 1 000 W | e300i
e300i (1 kW)
Available in 12, 24, 48, 110 and 200 Vdc
* ALL SPECIFIC ELECTRICAL NEEDS
* Charging batteries
* Power water pumps
* Use for resistance heating
...
Available in 12, 24, 48, 110 and 200 Vdc
* ALL SPECIFIC ELECTRICAL NEEDS
* Charging batteries
* Power water pumps
* Use for resistance heating
...
Small wind turbine - 1 000 W | e300i
e300i (1 kW)
Available in 12, 24, 48, 110 and 200 Vdc
* ALL SPECIFIC ELECTRICAL NEEDS
* Charging batteries
* Power water pumps
* Use for resistance heating
* Power the national grid
* Boost hybrid systems for increased energy efficiency
The e300i is the next generation of small wind turbine. It is a low starting machine allowing it to generate electricity at relatively low wind speeds. The high performance three blade rotor with pitch control powers a twin axial flux permanent magnet brushless alternator, with good heat management. The e300i maintains its rated output in excess wind speeds, optimising the potential power output and energy yield. More usable power generated, stored and used. The e300i powers telecoms sites around the world
Available in 12, 24, 48, 110 and 200 Vdc
* ALL SPECIFIC ELECTRICAL NEEDS
* Charging batteries
* Power water pumps
* Use for resistance heating
* Power the national grid
* Boost hybrid systems for increased energy efficiency
The e300i is the next generation of small wind turbine. It is a low starting machine allowing it to generate electricity at relatively low wind speeds. The high performance three blade rotor with pitch control powers a twin axial flux permanent magnet brushless alternator, with good heat management. The e300i maintains its rated output in excess wind speeds, optimising the potential power output and energy yield. More usable power generated, stored and used. The e300i powers telecoms sites around the world
Small wind turbine - 3 500 W | e400n
E400N (3.5 kW)
Available in 48*, 110 200 and 300Vdc
* Charge batteries
* Power water pumps
* Use for resistance heating
* Telecommunication sites
...
Available in 48*, 110 200 and 300Vdc
* Charge batteries
* Power water pumps
* Use for resistance heating
* Telecommunication sites
...
Small wind turbine - 3 500 W | e400n
E400N (3.5 kW)
Available in 48*, 110 200 and 300Vdc
* Charge batteries
* Power water pumps
* Use for resistance heating
* Telecommunication sites
* Power the national grid
* Wind solution for hybrid installations
The e400i is the latest development in the Kestrel range. The completely new 120 pole single axial flux direct drive alternator incorporates three main shaft bearings for long service life. The e400i maintains rated output in excess wind speeds using Kestrel patented blade pitch control. The e400i therefore gives an optimum energy harvest with no cut out wind speed. This Kestrel, like the other models optimises low wind and stays in complete control whether loaded or unloaded during excessive wind speeds.
Available in 48*, 110 200 and 300Vdc
* Charge batteries
* Power water pumps
* Use for resistance heating
* Telecommunication sites
* Power the national grid
* Wind solution for hybrid installations
The e400i is the latest development in the Kestrel range. The completely new 120 pole single axial flux direct drive alternator incorporates three main shaft bearings for long service life. The e400i maintains rated output in excess wind speeds using Kestrel patented blade pitch control. The e400i therefore gives an optimum energy harvest with no cut out wind speed. This Kestrel, like the other models optimises low wind and stays in complete control whether loaded or unloaded during excessive wind speeds.
Wind turbine - 3.5 kW | e400nb
The Kestrel e400nb is fitted with a mechanical band brake that will stop the Kestrel...
Wind turbine - 3.5 kW | e400nb
The Kestrel e400nb is fitted with a mechanical band brake that will stop the Kestrel safely in any wind condition. The brake is activated by a simple manual operation at the base of the tower.
Note: The same wind turbine is available in selected countries without the mechanical brake and is designated the e400n.
Note: The same wind turbine is available in selected countries without the mechanical brake and is designated the e400n.
Small wind turbine - 350 W | Superwind 350
The Superwind 350 is a small wind generator for professional use, which even under extreme conditions works autonomously and automaticly. It is often used on sites where there is no grid...
Small wind turbine - 350 W | Superwind 350
The Superwind 350 is a small wind generator for professional use, which even under extreme conditions works autonomously and automaticly. It is often used on sites where there is no grid available. The electric power generated by Superwind charges batteries and can be used directly for 12V- or 24 V-appliances. There are many industrial appliances on these voltage levels like measurement systems, transmitters or navigational aids. But there are also quite a number of high-quality energy-saving appliances available, such as energy saving lamps, refrigerators, deep-freezers, water pumps, ventilators, consumer electronics, TV, radio and navigation equipment, etc. Appliances for 230 V or 110 V can be supplied by an optional inverter.