+7 (812) 645-08-06
Peripheral line drivers, Bus controllers, Network controllers
select brand
USB interface module - 5 V, max. 100 mA
This module manufactured by BEI Sensors can hold signals from to SSI absolute encoders. It translates the encoder set up to the...
USB interface module - 5 V, max. 100 mA
This module manufactured by BEI Sensors can hold signals from to SSI absolute encoders. It translates the encoder set up to the...
Wireless interface module - 2.4 GHz | SwiftComm
The BEI sensors by SwiftComm are designed from basics as solutions for the wireless requirements of motion control processes. The...
Wireless interface module - 2.4 GHz | SwiftComm
The BEI sensors by SwiftComm are designed from basics as solutions for the wireless requirements of motion control processes. The sensors are capable of delivering a wireless signal over a secured network in real time. Point-to-point frequency hopping protocol is at 2.4GHz, which interfaces directly with an SSI absolute or incremental encoder. Connecting the SwiftComm transmitter to the receiver and encoder allows for the user to apply power and control the system. There are no complicated cabling requirements.
Fieldbus coupler - 4 spurs | 9411/21 series
Zone 1 Ex i Field Device Coupler 4 Spurs is a one of a kind technology which has an LED indication of status and faults on each spur. This highly innovative...
Fieldbus coupler - 4 spurs | 9411/21 series
Zone 1 Ex i Field Device Coupler 4 Spurs is a one of a kind technology which has an LED indication of status and faults on each spur. This highly innovative equipment is part of the Series 9411/21 and has a reduced starting and low short-circuit current that was made possible through power management. For added convenience, this world class technology has a switchable fieldbus-termination on board. This is also highly convenient because it has screw terminals, detachable screw terminals (Ex i Spurs) or spring cage terminals and can connect up to 4 FISCO field devices to the power trunk.
Fieldbus coupler - 8 spurs | 9411/21 series
This device is Zone 1 Ex i Field Device Coupler 8 Spurs in the series of 9411/21. It is able to connect as much as 8 field devices...
Fieldbus coupler - 8 spurs | 9411/21 series
This device is Zone 1 Ex i Field Device Coupler 8 Spurs in the series of 9411/21. It is able to connect as much as 8 field devices that comply with FISCO high-power trunk. It allows for bifurcation between safe field devices (intrinsic) and safe fieldbus (non-intrinsic).There is dedicated protection from short circuit for every spur with reduced start up and low short-circuit current with the aid of power management. There is also a LED signal that clearly indicates the faults and the status.
Fieldbus coupler - 9411/11 series
The Zone 1 Ex e Field Device Couplers are highly recommended for connection of up to 4 or 8 explosion protected (Ex d / Ex m) field devices to a non-intrinsically...
Fieldbus coupler - 9411/11 series
The Zone 1 Ex e Field Device Couplers are highly recommended for connection of up to 4 or 8 explosion protected (Ex d / Ex m) field devices to a non-intrinsically safe / Ex e field bus (high energy trunk). By current limiting during short-circuits, these couplers prevent a feedback effect from spurs on the trunk. These devices decreases starting and low short-circuit current from the trunk through its power management feature. These devices are specifically designed for FOUNDATIONTM fieldbus H1 and Profibus PA. It has a LED indication displaying faults on each spur and a switchable termination on board.
Fieldbus coupler - 9410/34 series
Zone 2 Ex n Field Device Coupler
Series 9410/34
For FOUNDATIONTM fieldbus H1 and Profibus PA (IEC 61158-2)
For...
Series 9410/34
For FOUNDATIONTM fieldbus H1 and Profibus PA (IEC 61158-2)
For...
Fieldbus coupler - 9410/34 series
Zone 2 Ex n Field Device Coupler
Series 9410/34
For FOUNDATIONTM fieldbus H1 and Profibus PA (IEC 61158-2)
For the connection of up to 12 Ex nA / Ex ic / Ex nL field devices
Low start-up current due to power management
Short-circuit monitoring with automatic switch-off of the respective spur and indicator (LED)
Detachable screw terminals with locking screws
Customer-specific enclosures available in different versions
Series 9410/34
For FOUNDATIONTM fieldbus H1 and Profibus PA (IEC 61158-2)
For the connection of up to 12 Ex nA / Ex ic / Ex nL field devices
Low start-up current due to power management
Short-circuit monitoring with automatic switch-off of the respective spur and indicator (LED)
Detachable screw terminals with locking screws
Customer-specific enclosures available in different versions
Fieldbus coupler - 4 spurs | 9411/24 series
The Zone 2 Ex i Field Device Coupler Series 9411/24 allow easy integration of up to 4 intrinsically safe FISCO field devices to the high power trunk. It functions...
Fieldbus coupler - 4 spurs | 9411/24 series
The Zone 2 Ex i Field Device Coupler Series 9411/24 allow easy integration of up to 4 intrinsically safe FISCO field devices to the high power trunk. It functions by ensuring separation of intrinsically safe devices from the non-intrinsically safe field bus to guarantee short-circuit protection for each spur. It reduces and minimizes starting and low short-circuits current from the trunk through its power management feature. It also comes with a switchable field bus-termination on board and Screw terminals or removable screw terminals (Ex i Spurs). It indicates status and shows the faults on each spur on its LED display.
Fieldbus coupler - IP20 | 750 series
Based on the application, it is possible to choose between fieldbus couplers for different methods. The wide range of fieldbus...
Fieldbus coupler - IP20 | 750 series
Based on the application, it is possible to choose between fieldbus couplers for different methods. The wide range of fieldbus couplers available for main fieldbus techniques and commercial Ethernet specifications allows complete, personalized fieldbus I/O techniques to be designed. This allows the program to easily provide individual client specifications without major variations. These aspects reduce managing mistakes and make sure the long-term security of program investment strategies.
D-Sub interface module - 289 series
WAGO Interface Modules are internationally known for its safe and maintenance free-connections. WAGO AUTOMATION has an extensive collection of world class and high performing...
D-Sub interface module - 289 series
WAGO Interface Modules are internationally known for its safe and maintenance free-connections. WAGO AUTOMATION has an extensive collection of world class and high performing interface modules for the most basic types of connectors. These one of a kind, highly exceptional module saves not just space but time as well. It also has a high-density wiring and thanks to the clearly laid out wiring and clear-cut pole marking, this very reliable technology also has quick wiring, commissioning and troubleshooting and makes this very convenient. WAGO boasts of its safe and maintenance free connections and this was accomplished with CAGE Clamp Connectors.
Interface module - 289 series
These WAGO interface modules provide connections that are both safe and maintenance free due to the presence of the CAGE CLAMP® connectors.
At a control level, these modules connect electrical...
At a control level, these modules connect electrical...
Interface module - 289 series
These WAGO interface modules provide connections that are both safe and maintenance free due to the presence of the CAGE CLAMP® connectors.
At a control level, these modules connect electrical...
At a control level, these modules connect electrical...