+7 (812) 645-08-06
MOSFET, IGBT and TRIAC module drivers
select brand
Gate driver - BAP-1551
Includes all power supplied needed to drive a half-bridge circuit
Short circuit and...
Short circuit and...
Gate driver - BAP-1551
Includes all power supplied needed to drive a half-bridge circuit
Short circuit and over current protection
Over voltage and under voltage lockout protection
Over temperature protection
DC link voltage sensing
Full set of protection and sensing information available from I/O connector
Built in dead-time generation
Short circuit and over current protection
Over voltage and under voltage lockout protection
Over temperature protection
DC link voltage sensing
Full set of protection and sensing information available from I/O connector
Built in dead-time generation
Gate driver - BAP-1491
Includes Four Individual SCR Gate Drivers
Single 24VDC Input
Opto-Isolated Customer Interface
SCR Short Circuit Detection Option
On-Board Snubber Option
Rugged Design (Mil-STD Shock & Vibe)
60 or 400 Hz Operation
Single 24VDC Input
Opto-Isolated Customer Interface
SCR Short Circuit Detection Option
On-Board Snubber Option
Rugged Design (Mil-STD Shock & Vibe)
60 or 400 Hz Operation
Gate driver - AP-1318
The AP-1318 provides a complete, tested, fast time-to-market solution for companies...
Gate driver - AP-1318
The AP-1318 provides a complete, tested, fast time-to-market solution for companies that need to control and interface to High Voltage IGBT modules.
A transformer coupled DC-DC converter provides 5000V isolation while developing only 10pf leakage capacitance between primary and secondary.
A transformer coupled DC-DC converter provides 5000V isolation while developing only 10pf leakage capacitance between primary and secondary.
SCR gate driver - BAP-1289
Drive Mutiple Devices in Series Stack or Parallel Configuration
Complete Electrical Isolation
Fiber-Optic Customer Interface
User-Definable...
Complete Electrical Isolation
Fiber-Optic Customer Interface
User-Definable...
SCR gate driver - BAP-1289
Drive Mutiple Devices in Series Stack or Parallel Configuration
Complete Electrical Isolation
Fiber-Optic Customer Interface
User-Definable Fiber-Optic Output
15 A Peak Gate Current
10 A/uS dI/dT Gate Current
Pulse Transformer Isolation
High Voltage Corona Resistant > 15Kv
High Open Circuit Gate Voltage
On-Board Power Supply Included
APPLICATIONS
Series SCR Stacks
Parallel SCR Arrays
AC Transfer Switches
Medium to High Voltage Power Supply
Rectifiers for High Energy Physics
Pulsed Power Systems
Complete Electrical Isolation
Fiber-Optic Customer Interface
User-Definable Fiber-Optic Output
15 A Peak Gate Current
10 A/uS dI/dT Gate Current
Pulse Transformer Isolation
High Voltage Corona Resistant > 15Kv
High Open Circuit Gate Voltage
On-Board Power Supply Included
APPLICATIONS
Series SCR Stacks
Parallel SCR Arrays
AC Transfer Switches
Medium to High Voltage Power Supply
Rectifiers for High Energy Physics
Pulsed Power Systems
SCR gate driver - BAP-3012
The BAP-3012 provides complete SCR firing control for industrial/commercial power supplies of any power level, delivering hard firing gate drive power to control larger SCRs...
SCR gate driver - BAP-3012
The BAP-3012 provides complete SCR firing control for industrial/commercial power supplies of any power level, delivering hard firing gate drive power to control larger SCRs from 16mm to 100mm.
The BAP3012 allows the user to take advantage of the benefits inherent to 12 pulse converters. These topologies provide very low output voltage ripple and minimize input harmonic distortion. However, to fully take advantage of dual bridge topologies, the current outputs of each bridge must be properly balanced.
Without the BAP-3012, slight mismatches (.5%) in transformer secondary voltages may result in current imbalances between paralleled bridges as high as 20%.
The BAP3012 allows the user to take advantage of the benefits inherent to 12 pulse converters. These topologies provide very low output voltage ripple and minimize input harmonic distortion. However, to fully take advantage of dual bridge topologies, the current outputs of each bridge must be properly balanced.
Without the BAP-3012, slight mismatches (.5%) in transformer secondary voltages may result in current imbalances between paralleled bridges as high as 20%.
Gate driver - 0.5 - 2.5 A | 5962, ACPL, HCPL series
Avago offers high reliability products ideal for driving power IGBTs...
Gate driver - 0.5 - 2.5 A | 5962, ACPL, HCPL series
Avago offers high reliability products ideal for driving power IGBTs and MOSFETs used in motor control inverter applications. The high high output/Vcc operating voltage range of the output stage provides the drive voltages required by gate controlled devices.