+7 (812) 645-08-06
MOSFET, IGBT and TRIAC module drivers
select brand
Gate driver
Isolated Half Bridge Driver Chip Set
Evaluation Boards
3 Phase Gate Driver
Remove sub family filter
Evaluation Boards
3 Phase Gate Driver
Remove sub family filter
MOSFET gate driver - 4.5 - 35 V | IXDN609
Features
Wide Operating Voltage Range: 4.5 to 35V
(Inputs and Outputs)
...
Wide Operating Voltage Range: 4.5 to 35V
(Inputs and Outputs)
...
MOSFET gate driver - 4.5 - 35 V | IXDN609
Features
Wide Operating Voltage Range: 4.5 to 35V
(Inputs and Outputs)
...
Wide Operating Voltage Range: 4.5 to 35V
(Inputs and Outputs)
...
MOSFET gate driver - Si82xx series
Silicon Labs' ISOdriver products offer ultra-fast propagation delays for better timing margins, rock-solid...
MOSFET gate driver - Si82xx series
Silicon Labs' ISOdriver products offer ultra-fast propagation delays for better timing margins, rock-solid...
Gate driver - 12 - 40 V, 5 - 10 A | ZXGD Series
The ZXGD3001E6 is a high-speed non-inverting single MOSFET gate driver capable of driving up to 9A into a MOSFET or IGBT gate capacitive load from supply voltages up to 12V. With typical propagation delay times down to...
Gate driver - 12 - 40 V, 5 - 10 A | ZXGD Series
The ZXGD3001E6 is a high-speed non-inverting single MOSFET gate driver capable of driving up to 9A into a MOSFET or IGBT gate capacitive load from supply voltages up to 12V. With typical propagation delay times down to 3ns and rise/fall times down to 11ns this device ensures rapid switching of the power MOSFET or IGBT to minimize power losses and distortion in high current fast switching applications. The ZXGD3001E6 is inherently rugged to latch-up and shoot-through, and its wide supply voltage range allows full enhancement to minimize on-losses of the power MOSFET or IGBT.
12V operating voltage range
9 Amps peak output current
Fast switching emitter-follower configuration
3ns propagation delay time
11ns rise/fall time, 1000pF load
Low input current requirement
4.2A(source)/2.2A(sink) output current from 10mA input
12V operating voltage range
9 Amps peak output current
Fast switching emitter-follower configuration
3ns propagation delay time
11ns rise/fall time, 1000pF load
Low input current requirement
4.2A(source)/2.2A(sink) output current from 10mA input