+7 (812) 645-08-06
Inclinometers, tilt sensors
select brand
1-axis tilt sensor - max. 48 V, IP67 | N1 series
The N1 Series of single axis tilt switch from Elobau are capable of handling...
1-axis tilt sensor - max. 48 V, IP67 | N1 series
The N1 Series of single axis tilt switch from Elobau are capable of handling...
1-axis tilt sensor - max. 30 VDC, 24 mA | N3 series
The equipment is delivered with an adjusted zero-situation. This can again be set by the user with an infrared hand transmitter. That makes this sensor suitable for constructionally unfavorable installation positions. In order to reduce the...
1-axis tilt sensor - max. 30 VDC, 24 mA | N3 series
The equipment is delivered with an adjusted zero-situation. This can again be set by the user with an infrared hand transmitter. That makes this sensor suitable for constructionally unfavorable installation positions. In order to reduce the...
2-axis tilt sensor / MEMS - max. 30 V, IP67 | N2 series
The N2 Biaxial Tilt switch from Elobau is engineered with a support for a pair...
2-axis tilt sensor / MEMS - max. 30 V, IP67 | N2 series
The N2 Biaxial Tilt switch from Elobau is engineered with a support for a pair of analog outputs and switching points for all tilt directions, and two pairs of relay and electronic outputs. Moreover, any combination provides redundancy over the entire range of the number of outputs that are admissible.
2-axis tilt sensor / MEMS - 30 VDC, 32 mA | N4 series
Lifting lamp stracker id the powerful and useful equipment to use. It is quite difficult...
2-axis tilt sensor / MEMS - 30 VDC, 32 mA | N4 series
Lifting lamp stracker id the powerful and useful equipment to use. It is quite difficult to maintain and install. It has mercury free switches and after installing it is being handle and use perfectly by the experts. The signals are available to use and check voltage. Digital rays are one of the special features of the lifting lamps.
Digital inclinometer - DXI 100
The Jewell DXI-100/200 Series single or dual digital inclinometer is designed to be used in several applications. The device uses analog closed loop sensor technology for precise measurement. It gives digital output and the resolution...
Digital inclinometer - DXI 100
The Jewell DXI-100/200 Series single or dual digital inclinometer is designed to be used in several applications. The device uses analog closed loop sensor technology for precise measurement. It gives digital output and the resolution...
Inclinometer / twin shaft / digital - DXI 200
The Jewell DXI-100/200 Series single or dual digital inclinometers are designed for use in measuring jewels. The device uses an analog closed loop sensor technology for giving precise measurement. It gives an digital output and...
Inclinometer / twin shaft / digital - DXI 200
The Jewell DXI-100/200 Series single or dual digital inclinometers are designed for use in measuring jewels. The device uses an analog closed loop sensor technology for giving precise measurement. It gives an digital output and...
Inertial inclinometer - ±1.0° ... ±90° | LSO Series
The Jewell LSOC/LSOP Series is a fluid damped, flexure suspension, servo inclinometer with an accurate inertial grade sensing instrument. It has a high resolution and a low hysteresis of less than 0.0005% of the full range output....
Inertial inclinometer - ±1.0° ... ±90° | LSO Series
The Jewell LSOC/LSOP Series is a fluid damped, flexure suspension, servo inclinometer with an accurate inertial grade sensing instrument. It has a high resolution and a low hysteresis of less than 0.0005% of the full range output....
1-axis servo-inclinometer - LSO-C/P-L Series
The JEWELL INSTRUMENTS LSOC/LSOP "L" series inclinometers feature a 4 to 20 mA output, high resolution and low hysteresis less than 0.0005% of full range output, robust design that can withstand...
1-axis servo-inclinometer - LSO-C/P-L Series
The JEWELL INSTRUMENTS LSOC/LSOP "L" series inclinometers feature a 4 to 20 mA output, high resolution and low hysteresis less than 0.0005% of full range output, robust design that can withstand shocks in excess of 1,500 g and vibrations over 35 grms, reaction on slopes less than 0.000006"/ft, high precision closed-loop force balanced sensor technology, and low white noise spectral density over 0.15 μV/Sq Root Hz. They are recommended for use in shock and vibration-present environments, such as steel processing, paving, grading, mining, tunneling, overturn detection, monitoring of dams, columns, bridges, for automated train controls, rail leveling and grinding or rail bed analysis, or for military applications, with measurement of angular tilt during high stresses and vibrations.
Inertial inclinometer - LSR Series
This transducer is designed for measuring horizontal angle or vertical deviation that has virtually infinite resolution. The device is rugged and sensitive at the same time. The Jewell LSR Series device is suitable for applications where space is a constraint....
Inertial inclinometer - LSR Series
This transducer is designed for measuring horizontal angle or vertical deviation that has virtually infinite resolution. The device is rugged and sensitive at the same time. The Jewell LSR Series device is suitable for applications where space is a constraint....
Inclinometer - ± 0.1%, IP68 | IS40
IS40 is an inclinometer that allows two-dimensional inclinations to be measured. There are...
Inclinometer - ± 0.1%, IP68 | IS40
IS40 is an inclinometer that allows two-dimensional inclinations to be measured. There are several versions available for the measuring ranges of 10, 45 and 60 degrees, while the compact and robust construction makes the sensor ideal for measuring angles in harsh environments. Finally, customers can use this device with various applications in the industry.
CANopen inclinometer - ± 10° - ± 60°, IP68, CANopen | IS60
The inclinometer IS60 permits 2-dimensional inclinations to be
measured. Versions...
measured. Versions...
CANopen inclinometer - ± 10° - ± 60°, IP68, CANopen | IS60
The inclinometer IS60 permits 2-dimensional inclinations to be
measured. Versions...
measured. Versions...