+7 (812) 645-08-06
Balancing machines
select brand
Centering tester for spindles - DIACATOR
For centrical alignment of bores on rotary machine tools
...
...
Centering tester for spindles - DIACATOR
For centrical alignment of bores on rotary machine tools
Bores from 1.5 mm to 340 mm/ 0.06“ to 13.4“
External diameter from 5 mm to 110 mm/0.2“ to 4.3“
Chucking possible for collet chuck, jaw chuck, inside morse taper
Bores from 1.5 mm to 340 mm/ 0.06“ to 13.4“
External diameter from 5 mm to 110 mm/0.2“ to 4.3“
Chucking possible for collet chuck, jaw chuck, inside morse taper
Rim run-out reducer machine
The Fontijne Grotnes Run out reducer is designed to improve the quality of the wheels....
Rim run-out reducer machine
The Fontijne Grotnes Run out reducer is designed to improve the quality of the wheels. The Run out reducer calibrate wheels coming from a assembly line, resulting in an improvement of axial and radial run-out of the wheels. A run-out reduction of 40-50% can be achieved, which results in a significant decrease of not approved wheels.
Balancing machine - 300 - 1 100 rpm, max. ø 340 mm | TD 1002
Haimer Modular Balancing System offers a perfect solution for the growing needs of advanced equipment for accomplishing better cutting sizes in a cost-effective manner. The need for such tools have resulted in the popularity of tools and...
Balancing machine - 300 - 1 100 rpm, max. ø 340 mm | TD 1002
Haimer Modular Balancing System offers a perfect solution for the growing needs of advanced equipment for accomplishing better cutting sizes in a cost-effective manner. The need for such tools have resulted in the popularity of tools and grippers as the higher spindle pace make the impacts of the unevenness more obvious. It leads to impacts such as abrasions, poor surface coating and a short durability.
However, Haimer Modular Balancing System eliminates these problems and offer a highly accurate device that can optimize the ability of equipment tools for pace, cutting size and a surface coating. Owing to the fact that balancing presents lesser vibrations, it lowers the chances of spindle corrosion and decreases the downtime while enhancing process safety.
Moreover, HAIMER provides an extensive device for the balancing of tool handlers, grating wheels and huge rotors with maximum diameters of 800 mm.
However, Haimer Modular Balancing System eliminates these problems and offer a highly accurate device that can optimize the ability of equipment tools for pace, cutting size and a surface coating. Owing to the fact that balancing presents lesser vibrations, it lowers the chances of spindle corrosion and decreases the downtime while enhancing process safety.
Moreover, HAIMER provides an extensive device for the balancing of tool handlers, grating wheels and huge rotors with maximum diameters of 800 mm.
Tools balancing machine - TD 2009 Economic
The TD 2009 economic unit is ideally used for dealing with the measurement...
Tools balancing machine - TD 2009 Economic
The TD 2009 economic unit is ideally used for dealing with the measurement and compensation of unbalances in a static plane. It is a suitable solution for balancing short tool holders and tools. Moreover, this unit is fitted with a keyboard and a screen that makes operations easy and accessible.
Tools balancing machine - TD 2009 Economic Plus
The TD 2009 economic plus is a unit that is ideally used for measuring discrepancies between 2 dynamic...
Tools balancing machine - TD 2009 Economic Plus
The TD 2009 economic plus is a unit that is ideally used for measuring discrepancies between 2 dynamic planes. This device is engineered with drawers that are capable of holding accessories. It is also fitted with a laser marking system, and an optical indexing system that provides operators with quick and error free operations. In addition, the unit has threaded bored for balancing with screws.
Tools balancing machine - TD 2009 Comfort
The TD2009 Comfort by Haimer is a tool balancing machine which is used for keeping the balancing time of an operation as...
Tools balancing machine - TD 2009 Comfort
The TD2009 Comfort by Haimer is a tool balancing machine which is used for keeping the balancing time of an operation as short as possible. This machine is equipped with a PC, keyboard, mouse and a monitor. The screen is used for fast input of data and configuration through its graphical user interface. Also, it is supported with a software which enables it to correct balancing the milling program. It uses a common practice in correcting unbalance function within a system.
Tools balancing machine - TD 2009 Comfort Plus
The TD Comfort Plus 2009 is a unit manufactured by Haimer company. It is a modular balancing system that has an...
Tools balancing machine - TD 2009 Comfort Plus
The TD Comfort Plus 2009 is a unit manufactured by Haimer company. It is a modular balancing system that has an advantage on graphics. It is an effective tool on balancing processes with its integrated PC that is applicable on storage for the user's balancing needs. Only the high-precision balancing of tools and tool holders can make the complete capacity of the machines tool with regards to speed, cutting volume and produced surface finish.