+7 (812) 645-08-06
Current measuring devices
select brand
Rogowski coil - 8 mm | MFC150
The MFC150 from Algodue is a rogowski coil that is ideal to measure currents from...
Rogowski coil - 8 mm | MFC150
The MFC150 from Algodue is a rogowski coil that is ideal to measure currents from mA to hundreds of kA. This device is high-linearity and it has high dynamic range. It is high-efficient with huge size or awkward shaped conductors or in places with restrict access. The coil ensures protection from open-circuited secondary.
Current transducer - 8 Hz - 100 kHz | RPS50
The RPS50 Series, manufactured by Algodue Elettronica, is a multi-scale single Rogowski...
Current transducer - 8 Hz - 100 kHz | RPS50
The RPS50 Series, manufactured by Algodue Elettronica, is a multi-scale single Rogowski...
Current transducer - 1000 A | FCA3000
The FCA3000 is a 3-channel Rogowski coil inputs designed with 3 true RMS DC outputs and...
Current transducer - 1000 A | FCA3000
The FCA3000 is a 3-channel Rogowski coil inputs designed with 3 true RMS DC outputs and 1 DC output for channel summary. It is applicable for three-stage systems and has a standard 3,000 A complete scale value. The full scale can be customized up to hundreds of kA. Furthermore, this device comes available with compact 9 DIN module sizes.
Rogowski coil - 12 mm | MFC190
The MFC190 is a 12mm flexible rogowski coil. The coil has an output value of 0,333V/kA 50Hz. It uses a calibrated...
Rogowski coil - 12 mm | MFC190
The MFC190 is a 12mm flexible rogowski coil. The coil has an output value of 0,333V/kA 50Hz. It uses a calibrated coil. The series can be customized such as various coil colors, standard or customized junction box, etc.
The series uses top technology. The bayonet connector is designed and enhanced to regulate calibration. The measurement uniformity can be done at any position of the conductor in the coil.
The series uses top technology. The bayonet connector is designed and enhanced to regulate calibration. The measurement uniformity can be done at any position of the conductor in the coil.
Residual current monitoring system - max. 0.5 A, max. 2 000 Hz | LINETRAXX® RCMA420 series
The RCMA420 are a series of AC/DC reactive waste current monitor systems where easy DC error or waste current are consistently higher than zero. This can...
Residual current monitoring system - max. 0.5 A, max. 2 000 Hz | LINETRAXX® RCMA420 series
The RCMA420 are a series of AC/DC reactive waste current monitor systems where easy DC error or waste current are consistently higher than zero. This can happen in specific load consisting six-pulse correctioners or single way correctioner with smoothing like converters, battery chargers, building site tools with frequency-regulated drives.
The pre-indication stage permits to differentiate across pre-indication and alarm. The tool almost relies on the load current as well as the minimum voltage of the system owing to the fact that the values are evaluated using current transformer.
The pre-indication stage permits to differentiate across pre-indication and alarm. The tool almost relies on the load current as well as the minimum voltage of the system owing to the fact that the values are evaluated using current transformer.
Residual current monitoring system - max. 3 A, max. 2 000 Hz | LINETRAXX® RCMA423 series
The RCMA423 are a series of AC/DC reactive waste current monitor systems where easy DC error or waste current are consistently higher than zero. This can happen in...
Residual current monitoring system - max. 3 A, max. 2 000 Hz | LINETRAXX® RCMA423 series
The RCMA423 are a series of AC/DC reactive waste current monitor systems where easy DC error or waste current are consistently higher than zero. This can happen in...
Residual current monitoring system - max. 125 A, max. 2 000 Hz | LINETRAXX® RCMS series
The RCMS system, manufactured by Bender, is a residual current evaluator that can sense error, residual and operating currents in earthed power supplies through the associated measuring current transformers. The...
Residual current monitoring system - max. 125 A, max. 2 000 Hz | LINETRAXX® RCMS series
The RCMS system, manufactured by Bender, is a residual current evaluator that can sense error, residual and operating currents in earthed power supplies through the associated measuring current transformers. The maximum V of the system to be monitored comes in accordance to the nominal insulation voltage of the measuring current transformers used in case of busbar systems, or on the cables or conductors that are routed through.
Measuring of the alternate and direct current is mandatory for the closed W-AB system measuring current transformers. Six W-AB system measuring current transformers need one AN420 power supply unit.
The transformers such as W, WR, and WS, are utilized for alternating and pulsating currents. They can also be used in any combination with the measuring channels of the evaluators.
Measuring of the alternate and direct current is mandatory for the closed W-AB system measuring current transformers. Six W-AB system measuring current transformers need one AN420 power supply unit.
The transformers such as W, WR, and WS, are utilized for alternating and pulsating currents. They can also be used in any combination with the measuring channels of the evaluators.
Current probe / clamp - CP2000 series
The CP 2000 Series, manufactured by Circutor, is a portable power analyzer equipped...
Current probe / clamp - CP2000 series
The CP 2000 Series, manufactured by Circutor, is a portable power analyzer equipped with clamp for an easy operation. It has a measuring range of 2000/200 A, nominal frequency from 48 to 65 Hz, and maximum plate of 125 x 5 mm. This is used in applications involving motor drives, transformers, and power supplies.
Current probe / clamp - 100 A | CP-100
The CP-100 Series, manufactured by Circutor, is a portable three-phase power analyzer...
Current probe / clamp - 100 A | CP-100
The CP-100 Series, manufactured by Circutor, is a portable three-phase power analyzer and monophasic equipped with clamp for easy operation. It has a measuring range from 1 up to 100 A, nominal frequency from 48 to 65 Hz, and maximum plate of 20 x 5 mm. It is used in applications involving motor drives, transformers and power supplies.
AC ammeter / analog - 100 mA, 100 A | EC-A series
The Ammeters of the EC-A Series are designed for alternating current applications. They...
AC ammeter / analog - 100 mA, 100 A | EC-A series
The Ammeters of the EC-A Series are designed for alternating current applications. They function by quickly and visually controlling the state of the current. These devices operate with no accessory power supply and only utilizes the CEC 96 type. They are equipped with a 1.5 precision class and an alarm unit that can be completely modified for CEC 96.
Analog ammeter / DC - 25 µA - 60 A | BC-A series
The BC-A Series, manufactured by Circutor, is a ammeter equipped with an alarm...
Analog ammeter / DC - 25 µA - 60 A | BC-A series
The BC-A Series, manufactured by Circutor, is a ammeter equipped with an alarm...
Analog ammeter / DC - BM A series
The BM-A series of moving coil ammeter unit does not need external power sources....
Analog ammeter / DC - BM A series
The BM-A series of moving coil ammeter unit does not need external power sources. The unit is engineered in boxes that are DIN approved, and come in sizes of 48, 72, 96, and 144. It is also graded with a 1.5 protection rating. The alarm system that is fitted may further be configured for CBC 96 operations.