+7 (812) 645-08-06
I/O modules
select brand
Off set I O module - XI/ON
The Modular XI/ON, composed of block, slice, and gateway, guarantees intelligent and communicative...
Off set I O module - XI/ON
The Modular XI/ON, composed of block, slice, and gateway, guarantees intelligent and communicative terminals. The block and slice design is compact, and modularity is guaranteed, with user needs met by a correct number of channels. Fast, flexible, cost-effective, and easily installed, XI/ON is the ideal solution for remote signal processing.
Analog I O module - SmartWire-DT
The SmarWire-DT connection is well known for its flexibility. This highly remarkable connection...
Analog I O module - SmartWire-DT
The SmarWire-DT connection is well known for its flexibility. This highly remarkable connection technology permits installation at any location in the control panel. One of the best features of this great technology is situating the input/output modules in immediate vicinity of the sensors/actuators reduces the wiring requirement to a minimum.
Digital I/O card - 8056
Enhanced 32-channel Reconfigurable RS422/RS485 Digital I/O PMC - Model 8056 dispenses 32 channels of all-around...
Digital I/O card - 8056
Enhanced 32-channel Reconfigurable RS422/RS485 Digital I/O PMC - Model 8056 dispenses 32 channels of all-around digital I/O, second-generation enhanced design, headers for JTAG connection and FLASH programming, sample FPGA implementation, Host "C" Code, FPGA-based revisable by host or on-board flash, variable SRAM architectures and reinforces 64 bit/66 MHz PCI Bus.
Digital I/O card - 32 bit, 10KE100 FPGA | 8055
The Elma 80-Channel Reconfigurable Digital I/O - Model 8055 is suitable for designs...
Digital I/O card - 32 bit, 10KE100 FPGA | 8055
The Elma 80-Channel Reconfigurable Digital I/O - Model 8055 is suitable for designs requiring high speed single ended operations. It features a 32-bit PCI to Local Bus Master Bridge and an impressive 64 of 80 I/O lines accessible via rear Pn4 connector. All 80 I/O lines are available via 80-pin front panel connector.
Digital I/O card - 4 port | 8017
With model 8017, a single card is capable of providing multiple functions. There are 16 digital...
Digital I/O card - 4 port | 8017
With model 8017, a single card is capable of providing multiple functions. There are 16 digital I/O lines for general purposes based on the Zilog 8536 chip. At 115k baud, asynchronous communication is available. The controls include CTS, TXD, RXD and RTS models. Access to the front I/O is via a 50-pin SCSI connector and to the back I/O via PN4 connector.
Digital I/O card - 16 port | 8038
The 16-port RS232 unit has 16 16550-based UARTs and can run from 300 baud to 115...
Digital I/O card - 16 port | 8038
The 16-port RS232 unit has 16 16550-based UARTs and can run from 300 baud to 115 Kbaud.
This uses so-called interrupt requests from one of four INTx units on a PCIbus. The I/O is accessible from a 68-pin SCSI connector on its front panel. This also has a rear I/O to wire all ports to a P4 connector.
This uses so-called interrupt requests from one of four INTx units on a PCIbus. The I/O is accessible from a 68-pin SCSI connector on its front panel. This also has a rear I/O to wire all ports to a P4 connector.
Digital I/O card - 8051
The 32-Channel Digital I/O with 30-ns Timestamp Counter - Model 8051 remarkably...
Digital I/O card - 8051
The 32-Channel Digital I/O with 30-ns Timestamp Counter - Model 8051 remarkably supplies 32-bits of bi-directional and parallel accessed I/O. It features a time stamp FIFO, a rear I/O accessed via 64-pin JN4 connector, a slave only PCI bridge in addition to a status LED indicators along its front panel.
Expansion module relay / safety - max. 6 A | EM series
Banner's extension modules are specifically created with safety in mind. These state-of-the-art modules provide additional safety outputs for a primary safety...
Expansion module relay / safety - max. 6 A | EM series
Banner's extension modules are specifically created with safety in mind. These state-of-the-art modules provide additional safety outputs for a primary safety device. One of the best features of this technology is it has four normally open (NO) safety outputs and at the same time, provides delayed or immediate outputs which will depend on the model. It requires no adjustments which means it is highly durable. These are very convenient because they offer a choice of 24V dc or 24V ac/dc supply voltage. Best of all, if malfunctioning, it signals the primary safety device to react and it responds in milliseconds.
Communication module cordless - max. 2.4 GHz | SureCross DX70 series
Without noise obstruction or signal interference, the SureCross DX70 wireless networks make sure that Nodes communicate only with their corresponding gateway due to the presence...
Communication module cordless - max. 2.4 GHz | SureCross DX70 series
Without noise obstruction or signal interference, the SureCross DX70 wireless networks make sure that Nodes communicate only with their corresponding gateway due to the presence of binding technology. Dependable data delivery is provided by the combination of a Frequency Hopping Spread Spectrum (FHSS) and Time Division Multiple Access (TDMA) architecture.
Inputs from sensors and devices made by Banner and other manufacturers can be used by this machine. It additionally supports both digital and analog I/O in a single unit. This product is suitable for harsh environments. It also comes with IEC IP67, NEMA 6-rated housing. 900MHz or 2.4GHz frequency models are available.
Inputs from sensors and devices made by Banner and other manufacturers can be used by this machine. It additionally supports both digital and analog I/O in a single unit. This product is suitable for harsh environments. It also comes with IEC IP67, NEMA 6-rated housing. 900MHz or 2.4GHz frequency models are available.