+7 (812) 645-08-06
Fiber optic communication network equipment
select brand
Repeater fiber optic / industrial - RS232/RS485/RS422, 1.5 Mb/s | RFO485
The RFO485 is specifically designed with a high quality functionality and performance....
Repeater fiber optic / industrial - RS232/RS485/RS422, 1.5 Mb/s | RFO485
The RFO485 is specifically designed with a high quality functionality and performance. The good quality device is highly classified as a range of fiber optic repeaters which permits to make an optical multidrop network or a failsafe ring. It also has a wide range of versions mainly in multiple mode fiber optics.
Transfer switch / static - 100 - 600 A | Master Switch Three-phase
Current : 100 A - 600 A
Voltage : 380 V - 415 V
To improve resilience in power continuity applications the static transfer switch called MASTER SWITCH can be effectively used. It can be easily used with an UPS or can be also used as a stand alone design effectively. The OPERATING PRINCIPLE MASTER SWITCH...
Voltage : 380 V - 415 V
To improve resilience in power continuity applications the static transfer switch called MASTER SWITCH can be effectively used. It can be easily used with an UPS or can be also used as a stand alone design effectively. The OPERATING PRINCIPLE MASTER SWITCH...
Transfer switch / static - 100 - 600 A | Master Switch Three-phase
To improve resilience in power continuity applications the static transfer switch called MASTER SWITCH can be effectively used. It can be easily used with an UPS or can be also used as a stand alone design effectively. The OPERATING PRINCIPLE MASTER SWITCH adds redundancy to a critical installation and can transfer connected load between two separate AC power sources automatically. The transfer becomes automatic when some input power supply fails outside the set tolerances. It can also be manually forced to use the front panel keypad or even remotely with a communications network .
It has protection against power failures and when any of the two power sources do not return with an acceptable tolerance value the MASTER SWITCH transfers all the other loads on the second power source. It can happen instantly if both sources are in phase. It also has an added protection against environmental situations. Overloads and load faults In the event of an overload or fault condition, the internal protection. . .
It has protection against power failures and when any of the two power sources do not return with an acceptable tolerance value the MASTER SWITCH transfers all the other loads on the second power source. It can happen instantly if both sources are in phase. It also has an added protection against environmental situations. Overloads and load faults In the event of an overload or fault condition, the internal protection. . .
Optical fiber interleaver - LDOM
Board at Europe format: 220 mm x 100 mm, width = 6 TE (30,5 mm), weight: 0.5 Kg
...
Optical fiber interleaver - LDOM
Board at Europe format: 220 mm x 100 mm, width = 6 TE (30,5 mm), weight: 0.5 Kg
On the front side :
- Junction connector D-SUB 15 points with female contacts
- Optical transmit and receive connectors type SC
- Knob
On the rear side the connector is according to DIN 41612 type E48 with male contacts
On the front side :
- Junction connector D-SUB 15 points with female contacts
- Optical transmit and receive connectors type SC
- Knob
On the rear side the connector is according to DIN 41612 type E48 with male contacts