+7 (812) 645-08-06
Graphite seals
select brand
Graphite seal / high-pressure - 800 bar | Statotherm® V
Statotherm V Cover seals V881 are made from pure graphite (purity > 99%) with internal stainless steel inserts for seal spaces with larger gaps and/or higher pressures e.g. for power plants...
Graphite seal / high-pressure - 800 bar | Statotherm® V
Statotherm V Cover seals V881 are made from pure graphite (purity > 99%) with internal stainless steel inserts for seal spaces with larger gaps and/or higher pressures e.g. for power plants at high temperatures and up to approximately 1,000 mm diameter.
Advantages
Suitable for sealing of larger gaps
Easy installation and removal
No damaging of the seal surfaces
Very good extrusion properties
Ensures operating safety
No hardening
Long service life
Recommended applications
Process industry
Petrochemical industry
Chemical industry
Power plant technology
Building services industry
Valves
Advantages
Suitable for sealing of larger gaps
Easy installation and removal
No damaging of the seal surfaces
Very good extrusion properties
Ensures operating safety
No hardening
Long service life
Recommended applications
Process industry
Petrochemical industry
Chemical industry
Power plant technology
Building services industry
Valves
Graphite seal / expanded - PDM
The more highly compressed pure graphite gasket with two rough sheet metal inserts.
Three...
Three...
Graphite seal / expanded - PDM
The more highly compressed pure graphite gasket with two rough sheet metal inserts.
Three convincing advantages, wich results from the 30% higher compression with KLINGERgraphite laminate PDM: 1. High stability through two rough sheet metal inserts 2. Optimal handling 3. Clearly increased safety
Three convincing advantages, wich results from the 30% higher compression with KLINGERgraphite laminate PDM: 1. High stability through two rough sheet metal inserts 2. Optimal handling 3. Clearly increased safety
Graphite seal / expanded - 0.1 mm | PSM
The pure graphite gasket with rough sheet metal insert
KLINGERgraphite...
KLINGERgraphite...
Graphite seal / expanded - 0.1 mm | PSM
The pure graphite gasket with rough sheet metal insert
KLINGERgraphite laminate PSM consists of a 0.10mm thick rough sheet metal foil of stainless steel 1.4401, on both sides of wich a KLINGERgraphite foil is rolled on without adhesive. The result of this is particularly high stability under load.
KLINGERgraphite laminate PSM consists of a 0.10mm thick rough sheet metal foil of stainless steel 1.4401, on both sides of wich a KLINGERgraphite foil is rolled on without adhesive. The result of this is particularly high stability under load.
Graphite gasket sheet / expanded - 0.05 mm
The pure graphite gasket with smooth sheet metal insert.
KLINGERgraphite laminate SLS consists...
KLINGERgraphite laminate SLS consists...
Graphite gasket sheet / expanded - 0.05 mm
The pure graphite gasket with smooth sheet metal insert.
KLINGERgraphite laminate SLS consists of expanded layers of graphite, wich are stuck to a 0.05mm thin smooth sheet metal foil made of 1.4401. The adhesive layer is applied via a precisely controlled process, wich makes it possible to keep the amount of adhesive below 1% of the amount of graphite in order to ensure uniform distribution of the adhesive
KLINGERgraphite laminate SLS consists of expanded layers of graphite, wich are stuck to a 0.05mm thin smooth sheet metal foil made of 1.4401. The adhesive layer is applied via a precisely controlled process, wich makes it possible to keep the amount of adhesive below 1% of the amount of graphite in order to ensure uniform distribution of the adhesive
Graphite gasket sheet / expanded - 1 - 3 mm | TSM series
The new gasket material KLINGERgraphite-laminate TSM fulfills safely the TA-Luft requirements.
Due...
Due...
Graphite gasket sheet / expanded - 1 - 3 mm | TSM series
The new gasket material KLINGERgraphite-laminate TSM fulfills safely the TA-Luft requirements.
Due to a better restistance against oxidation it offers additionally a higher safety than usual graphite materials. Actually it is available in the thicknesses of 1.0mm, 1.5mm, 2.0mm and 3.0mm. Please find more details in our leaflet.
Due to a better restistance against oxidation it offers additionally a higher safety than usual graphite materials. Actually it is available in the thicknesses of 1.0mm, 1.5mm, 2.0mm and 3.0mm. Please find more details in our leaflet.
Graphite seal / metal - RINGSDORFF®
Brazing and Glass-to-Metal Sealing Jigs
Sealing Jigs for Brazing and Glass-to-Metal Made of RINGSDORFF® Graphite
Graphite jigs are used in the production...
Sealing Jigs for Brazing and Glass-to-Metal Made of RINGSDORFF® Graphite
Graphite jigs are used in the production...
Graphite seal / metal - RINGSDORFF®
Brazing and Glass-to-Metal Sealing Jigs
Sealing Jigs for Brazing and Glass-to-Metal Made of RINGSDORFF® Graphite
Graphite jigs are used in the production...
Sealing Jigs for Brazing and Glass-to-Metal Made of RINGSDORFF® Graphite
Graphite jigs are used in the production...