+7 (812) 645-08-06
Turbines
select brand
Gas turbine / heavy-duty - 50 Hz, 397 - 470 MW | 9HA
Rated power kW : 397000 kW - 470000 kW
The 9HA high-efficiency, air-cooled gas turbine leads the industry. Its flexible conversion of fuel to electricity
helps you meet increasingly dynamic power demands...
The 9HA high-efficiency, air-cooled gas turbine leads the industry. Its flexible conversion of fuel to electricity
helps you meet increasingly dynamic power demands...
Gas turbine / heavy-duty - 50 Hz, 397 - 470 MW | 9HA
The 9HA high-efficiency, air-cooled gas turbine leads the industry. Its flexible conversion of fuel to electricity
helps you meet increasingly dynamic power demands cost effectively.
Achieves greater than 61 percent net combined-cycle efficiency
Serves a broad power range with two sizes: 397 and 470 megawatt (MW) simple cycle
Delivers lowest lifecycle cost per MW thanks to a simplified air-cooled architecture combined with advanced materials and proven operability and reliability
Reaches turndown as low as 30 percent of gas turbine baseload output within emissions compliance while accommodating wide natural gas fuel composition variance
helps you meet increasingly dynamic power demands cost effectively.
Achieves greater than 61 percent net combined-cycle efficiency
Serves a broad power range with two sizes: 397 and 470 megawatt (MW) simple cycle
Delivers lowest lifecycle cost per MW thanks to a simplified air-cooled architecture combined with advanced materials and proven operability and reliability
Reaches turndown as low as 30 percent of gas turbine baseload output within emissions compliance while accommodating wide natural gas fuel composition variance
Gas turbine / heavy-duty - 60 Hz, 275 - 330 MW | 7HA series
Rated power kW : 275000 kW - 330000 kW
This high-efficiency, air-cooled gas turbine leads the industry in 60Hz. Its flexible, cost-effective conversion of fuel to electricity helps you meet increasingly dynamic...
This high-efficiency, air-cooled gas turbine leads the industry in 60Hz. Its flexible, cost-effective conversion of fuel to electricity helps you meet increasingly dynamic...
Gas turbine / heavy-duty - 60 Hz, 275 - 330 MW | 7HA series
This high-efficiency, air-cooled gas turbine leads the industry in 60Hz. Its flexible, cost-effective conversion of fuel to electricity helps you meet increasingly dynamic power demands cost effectively.
Achieves greater than 61 percent net combined-cycle efficiency
Serves a broad power range with two sizes: 275 and 330 megawatt (MW) simple-cycle output
Delivers lowest lifecycle cost per MW thanks to a simplified air-cooled architecture combined with advanced materials and proven operability and reliability
Reaches turndown as low as 30 percent of gas turbine baseload output within emissions compliance while accommodating wide natural gas fuel composition variance
Achieves greater than 61 percent net combined-cycle efficiency
Serves a broad power range with two sizes: 275 and 330 megawatt (MW) simple-cycle output
Delivers lowest lifecycle cost per MW thanks to a simplified air-cooled architecture combined with advanced materials and proven operability and reliability
Reaches turndown as low as 30 percent of gas turbine baseload output within emissions compliance while accommodating wide natural gas fuel composition variance
Gas turbine / heavy-duty - 50 Hz , 265 MW | 9F.03
Rated power kW : 265000 kW
Flexibility and High Performance Together
In a world of trade-offs, the rugged 9F.03 heavy-duty gas turbine delivers efficiency, flexible operation, and reliability...
Flexibility and High Performance Together
In a world of trade-offs, the rugged 9F.03 heavy-duty gas turbine delivers efficiency, flexible operation, and reliability...
Gas turbine / heavy-duty - 50 Hz , 265 MW | 9F.03
Flexibility and High Performance Together
In a world of trade-offs, the rugged 9F.03 heavy-duty gas turbine delivers efficiency, flexible operation, and reliability in one proven solution. Its delivery cycle of less than eight months from order to operation gets you up and running fast.
Consistent Performance with Improved Results in Diverse
Applications
Cyclic, mid-cyclic, and baseload operations, rapidly adjustable to meet fluctuating power demands and environmental mandates
District heating
Industrial, refinery cogeneration
Integrated water and power plant, water desalination
Aluminum industry for smelters
In a world of trade-offs, the rugged 9F.03 heavy-duty gas turbine delivers efficiency, flexible operation, and reliability in one proven solution. Its delivery cycle of less than eight months from order to operation gets you up and running fast.
Consistent Performance with Improved Results in Diverse
Applications
Cyclic, mid-cyclic, and baseload operations, rapidly adjustable to meet fluctuating power demands and environmental mandates
District heating
Industrial, refinery cogeneration
Integrated water and power plant, water desalination
Aluminum industry for smelters
Gas turbine / heavy-duty - 60 Hz, 227 MW | 7F.05
Rated power kW : 227000 kW
Next-generation, F-class flexibility and nefficiency
Nobody needs to tell you the demands of todays...
Next-generation, F-class flexibility and nefficiency
Nobody needs to tell you the demands of todays...
Gas turbine / heavy-duty - 60 Hz, 227 MW | 7F.05
Rated power kW : 227000 kW
Next-generation, F-class flexibility and nefficiency
Nobody needs to tell you the demands of todays...
Next-generation, F-class flexibility and nefficiency
Nobody needs to tell you the demands of todays...
Gas turbine / heavy-duty - 60 Hz, 187 MW | 7F.04
Rated power kW : 187000 kW
We Set the Industry Standard for F-Class Power
GE introduced the world to F-class gas turbine technology in 1989; weve built the worlds largest fleet.
Today we power the globe with more than 1,100 installed F-class units producing...
We Set the Industry Standard for F-Class Power
GE introduced the world to F-class gas turbine technology in 1989; weve built the worlds largest fleet.
Today we power the globe with more than 1,100 installed F-class units producing...
Gas turbine / heavy-duty - 60 Hz, 187 MW | 7F.04
Rated power kW : 187000 kW
We Set the Industry Standard for F-Class Power
GE introduced the world to F-class gas turbine technology in 1989; weve built the worlds largest fleet.
Today we power the globe with more than 1,100 installed F-class units producing...
We Set the Industry Standard for F-Class Power
GE introduced the world to F-class gas turbine technology in 1989; weve built the worlds largest fleet.
Today we power the globe with more than 1,100 installed F-class units producing...
Steam turbine / aeroderivative / combined cycle - 180 - 600 MW | 109D-14
The GE 109D-14 steam turbine boasts of the latest clearance and sealing control, advanced steam turbine architecture built in three...
Steam turbine / aeroderivative / combined cycle - 180 - 600 MW | 109D-14
The GE 109D-14 steam turbine boasts of the latest clearance and sealing control, advanced steam turbine architecture built in three sections and an extremely high efficiency technology. Some of the other striking features of this outstanding steam turbine include advanced aerodynamics, sophisticated leakage management and a much advanced construction of the drum motor, with blinglet nozzles. Its design stands on but improves the proven technology in axial flow steam turbines. It boasts a high performance steam-path.
Steam turbine / aeroderivative / combined cycle - 100 - 300 MW | A series
The best way to deal with the high demands in the energy environment is with an A series reheat steam turbines...
Steam turbine / aeroderivative / combined cycle - 100 - 300 MW | A series
The best way to deal with the high demands in the energy environment is with an A series reheat steam turbines from GE. To provide you with the effectiveness and the right output you are looking for within combined cycle systems, the steam turbines are designed with new enhancements. Along with the benefits you can get from our A series, is the heat steam turbine which presents a drum rotor design with a high-reaction.
Steam turbine / aeroderivative / power generation / combined cycle - 180 - 600 MW | D series
GE's D series reheat large combined-cycle steam turbine are designed to meet requirements of efficient power generation in various industrial steam...
Steam turbine / aeroderivative / power generation / combined cycle - 180 - 600 MW | D series
GE's D series reheat large combined-cycle steam turbine are designed to meet requirements of efficient power generation in various industrial steam turbine applications. It comes from a combination of fossil and nuclear fleet experience and reliability with the straight condensing features characteristic of industrial steam turbines.
The result is a structure that can be adapted to various single and multi-shaft offerings. This is meant for F class or higher gas turbine technologies which support economical use of 3-pressure level designed steam turbine.
The result is a structure that can be adapted to various single and multi-shaft offerings. This is meant for F class or higher gas turbine technologies which support economical use of 3-pressure level designed steam turbine.
Steam turbine / aeroderivative / geothermal - 100 - 300 MW | A5/A9 series
These single-cased turbines are useful for reheating...
Steam turbine / aeroderivative / geothermal - 100 - 300 MW | A5/A9 series
These single-cased turbines are useful for reheating needs and are made with back-to-back flow paths to keep temperatures under control and to prevent thermal stress from being a huge issue in any application.
Steam turbine / aeroderivative / geothermal - 5 - 100 MW | SG series
The SG series Steam Turbines feature a one-of-a-kind design able to resist through geothermal steam...
Steam turbine / aeroderivative / geothermal - 5 - 100 MW | SG series
The SG series Steam Turbines feature a one-of-a-kind design able to resist through geothermal steam conditions, may it be steams that are saturated or slightly superheated, presence of corrosive contaminants or low pressure. It also comes with an inlet section for large volumetric flow capability and a partial arc of admission control to allow maintenance of full turbine capacity.
Gas turbine / aeroderivative / multi-stage / industrial - LM1800e
Rotational speed : 3600 rpm
Rated power kW : 16000 kW - 18000 kW
GE’s innovative LM1800e aeroderivative gas turbine package is designed with simplicity and standardization to meet industrial power needs in the 16 to 18 megawatt range. Part of the LM2500 aeroderivative gas turbine family, the LM1800e is enhanced for low power applications with a reduced firing temperature yielding...
Rated power kW : 16000 kW - 18000 kW
GE’s innovative LM1800e aeroderivative gas turbine package is designed with simplicity and standardization to meet industrial power needs in the 16 to 18 megawatt range. Part of the LM2500 aeroderivative gas turbine family, the LM1800e is enhanced for low power applications with a reduced firing temperature yielding...
Gas turbine / aeroderivative / multi-stage / industrial - LM1800e
GE’s innovative LM1800e aeroderivative gas turbine package is designed with simplicity and standardization to meet industrial power needs in the 16 to 18 megawatt range. Part of the LM2500 aeroderivative gas turbine family, the LM1800e is enhanced for low power applications with a reduced firing temperature yielding extended hot section and combustor life and a six-stage power turbine allowing direct drive operation at 50 or 60 Hz. Derived from GE’s reliable CF6 aircraft engine, the LM1800e is an ideal choice for combined heat and power or mechanical drive applications with base and extended scope configurations. Balance of plant options are also available beyond the gas turbine package.
Features & Benefits
Available for both 50 Hz and 60 Hz applications
Outstanding reliability and best-in-class efficiency
Simplified standard design specifically for industrial applications
No water or steam required for emission control
Ideal for power generation, cogeneration, and combined heat & power applications
Reduced maintenance and overhaul intervals with quick engine change-out capability
Basic Specifications
POWER RANGE: 18 MW
RELIABILITY: 99%
EFFICIENCY: 35%
TURBINE SPEED: 3,600 rpm
Features & Benefits
Available for both 50 Hz and 60 Hz applications
Outstanding reliability and best-in-class efficiency
Simplified standard design specifically for industrial applications
No water or steam required for emission control
Ideal for power generation, cogeneration, and combined heat & power applications
Reduced maintenance and overhaul intervals with quick engine change-out capability
Basic Specifications
POWER RANGE: 18 MW
RELIABILITY: 99%
EFFICIENCY: 35%
TURBINE SPEED: 3,600 rpm
Gas turbine / aeroderivative / multi-stage / industrial - LM2500 BASE
Rotational speed : 3600 rpm
Rated power kW : 24000 kW
GEs LM2500 Base aeroderivative gas turbine package has been one of the top selling aeroderivative gas turbines in its class for over 40 years and continues to evolve to provide increased customer value. With its dual fuel capability, low emission, and fast load response, it can reliably...
Rated power kW : 24000 kW
GEs LM2500 Base aeroderivative gas turbine package has been one of the top selling aeroderivative gas turbines in its class for over 40 years and continues to evolve to provide increased customer value. With its dual fuel capability, low emission, and fast load response, it can reliably...
Gas turbine / aeroderivative / multi-stage / industrial - LM2500 BASE
Rotational speed : 3600 rpm
Rated power kW : 24000 kW
GEs LM2500 Base aeroderivative gas turbine package has been one of the top selling aeroderivative gas turbines in its class for over 40 years and continues to evolve to provide increased customer value. With its dual fuel capability, low emission, and fast load response, it can reliably...
Rated power kW : 24000 kW
GEs LM2500 Base aeroderivative gas turbine package has been one of the top selling aeroderivative gas turbines in its class for over 40 years and continues to evolve to provide increased customer value. With its dual fuel capability, low emission, and fast load response, it can reliably...
Gas turbine / aeroderivative / power generation - LM2500+
Rotational speed : 3600 rpm
Rated power kW : 29000 kW
GEs LM2500+ aeroderivative gas turbine package advances the proven performance of our LM2500 Base to yield more than 40,000 shaft horsepower using an upgraded compressor section with an added zero stage for...
Rated power kW : 29000 kW
GEs LM2500+ aeroderivative gas turbine package advances the proven performance of our LM2500 Base to yield more than 40,000 shaft horsepower using an upgraded compressor section with an added zero stage for...
Gas turbine / aeroderivative / power generation - LM2500+
Rotational speed : 3600 rpm
Rated power kW : 29000 kW
GEs LM2500+ aeroderivative gas turbine package advances the proven performance of our LM2500 Base to yield more than 40,000 shaft horsepower using an upgraded compressor section with an added zero stage for...
Rated power kW : 29000 kW
GEs LM2500+ aeroderivative gas turbine package advances the proven performance of our LM2500 Base to yield more than 40,000 shaft horsepower using an upgraded compressor section with an added zero stage for...
Gas turbine / aeroderivative - LM2500+G4
Rotational speed : 3600 rpm
Rated power kW : 34000 kW
GEs LM2500+G4 aeroderivative gas turbine package combines the successful heritage of the LM2500 Base and LM2500+ aeroderivative gas turbine packages to create a powerful and very reliable solution ideal for marine applications. With a modified zero state for increased flow...
Rated power kW : 34000 kW
GEs LM2500+G4 aeroderivative gas turbine package combines the successful heritage of the LM2500 Base and LM2500+ aeroderivative gas turbine packages to create a powerful and very reliable solution ideal for marine applications. With a modified zero state for increased flow...
Gas turbine / aeroderivative - LM2500+G4
Rotational speed : 3600 rpm
Rated power kW : 34000 kW
GEs LM2500+G4 aeroderivative gas turbine package combines the successful heritage of the LM2500 Base and LM2500+ aeroderivative gas turbine packages to create a powerful and very reliable solution ideal for marine applications. With a modified zero state for increased flow...
Rated power kW : 34000 kW
GEs LM2500+G4 aeroderivative gas turbine package combines the successful heritage of the LM2500 Base and LM2500+ aeroderivative gas turbine packages to create a powerful and very reliable solution ideal for marine applications. With a modified zero state for increased flow...
Gas turbine / aeroderivative / multi-stage / industrial - LM6000
Rated power kW : 40000 kW - 56000 kW
Derived from the CF6-80C2 aircraft engine, GE’s LM6000 gas turbine family employs proven advanced emissions technology, package flexibility, and diverse fuel capabilities that distinguish its ability to serve a broad spectrum of energy...
Derived from the CF6-80C2 aircraft engine, GE’s LM6000 gas turbine family employs proven advanced emissions technology, package flexibility, and diverse fuel capabilities that distinguish its ability to serve a broad spectrum of energy...
Gas turbine / aeroderivative / multi-stage / industrial - LM6000
Derived from the CF6-80C2 aircraft engine, GE’s LM6000 gas turbine family employs proven advanced emissions technology, package flexibility, and diverse fuel capabilities that distinguish its ability to serve a broad spectrum of energy users. Providing power in the 40-56 megawatt range with up to 42% efficiency and 99% fleet reliability, the dual-rotor, direct-drive LM6000 offers a flexible, compact design for utility, industrial, and oil & gas applications.
Since its introduction in 1992, more than 1,000 units have accumulated over 21 million operating hours worldwide—that’s more than four times more service than all other competing gas turbines in its class combined. With fast ramp rates, 10-minute starts, cycling and load following capability, high efficiency, and modular maintenance, the LM6000 has been one of the top selling gas turbines in its class for more than two decades.
Since its introduction in 1992, more than 1,000 units have accumulated over 21 million operating hours worldwide—that’s more than four times more service than all other competing gas turbines in its class combined. With fast ramp rates, 10-minute starts, cycling and load following capability, high efficiency, and modular maintenance, the LM6000 has been one of the top selling gas turbines in its class for more than two decades.