+7 (812) 645-08-06
Torque limiters
select brand
Torque limiter - 2 - 2 000 Nm | SKB series
The torque limiters of the SKB series feature torques from 2 to 3,000 Nm and shaft diameters...
Torque limiter - 2 - 2 000 Nm | SKB series
The torque limiters of the SKB series feature torques from 2 to 3,000 Nm and shaft diameters from 6 to 100 mm. These models are equipped with integrated ball bearings and designed to handle both high axial and radial loads as well as extraordinary syncronism with low noise emission. Additionally, the EASY clamping ring hub, allows simple installation.
Torque limiter - 2 - 9 000 Nm | SKY series
The SKY torque limiters is manufactured by Jakob Antriebstechnik and has a torque...
Torque limiter - 2 - 9 000 Nm | SKY series
The SKY torque limiters is manufactured by Jakob Antriebstechnik and has a torque range of 6 Nm to 3000 Nm. Their shaft diameter varies from 5 mm to 70 mm.
The limiters have a conical clamping hub and an integrated ball bearing. This design enables use in applications involving high axial and radial load.
The limiters have a conical clamping hub and an integrated ball bearing. This design enables use in applications involving high axial and radial load.
Torque limiter - 2 - 800 Nm | SKX-L series
SKX-L Torque Limiter has a torque range of 2 - 800 Nm and 7 - 58 mm shaft diameter...
Torque limiter - 2 - 800 Nm | SKX-L series
SKX-L Torque Limiter has a torque range of 2 - 800 Nm and 7 - 58 mm shaft diameter range. With a radial clamp ring hub providing simple installation and long bearing journal for integrated slide bearing, it has small centric diameter for small size pulley attachment and gear wheels.
Torque limiter - 2 - 550 Nm | SKG series
The SKG series is a torque limiter that is ideal for use in limiter drives....
Torque limiter - 2 - 550 Nm | SKG series
The SKG series is a torque limiter that is ideal for use in limiter drives. Its torque output ranges from 2 Nm up to 550 Nm, and is integrated with a shaft that measures from 12 mm up to 44 mm in diameter. The model incorporates a ball bearing, and a conical clamping ring hub.
Torque limiter - 2 - 9 000 Nm | SKW series
The Torque limiters are specifically being utilized for indirect drives. It projects...
Torque limiter - 2 - 9 000 Nm | SKW series
The Torque limiters are specifically being utilized for indirect drives. It projects a torque range from 6-3000 Nm, and a shaft diameter from 6-90 mm. Moreover, it also offers a cost-effective feature, an easy key-way connection, and an enhanced ball-bearing intended for a high-axial and a radial type of loads.
Torque limiter with friction
Pilot Mount Torque Limiters Ball Bearing Pilot can be mechanically adjustable and when there is an overload, there will be notification in the form of continuously engaged friction torque limiter slip. The torque that...
Torque limiter with friction
Pilot Mount Torque Limiters Ball Bearing Pilot can be mechanically adjustable and when there is an overload, there will be notification in the form of continuously engaged friction torque limiter slip. The torque that...
Torque limiter with elastic coupling
Flexible mechanical torque limiter coupling is a mechanically adjustable, continuously engaged friction torque limiter device which also provides momentary overload protection. Field adjustability...
Torque limiter with elastic coupling
Flexible mechanical torque limiter coupling is a mechanically adjustable, continuously engaged friction torque limiter device which also provides momentary overload protection. Field adjustability...
Torque limiter with friction - T4X2R-STH
The T4X2R is a unit manufactured by Mach III company. It is a friction torque limiter...
Torque limiter with friction - T4X2R-STH
The T4X2R is a unit manufactured by Mach III company. It is a friction torque limiter that have various couplings that offers different output options to connect either the shaft or the nut. The torque limiters are not recommended in continuous slip or tension control applications. It has a maximum length of 6.90.
Automatic clutch / security / overload - CM series
The CM series is a line of safety clutches manufactured by Madler®. The body of the units are built from steel.
The units are an overload system that operates...
The units are an overload system that operates...
Automatic clutch / security / overload - CM series
The CM series is a line of safety clutches manufactured by Madler®. The body of the units are built from steel.
The units are an overload system that operates...
The units are an overload system that operates...
Hub with friction - min. 1 360 Nm | FS series
Madler presents Sliding Hubs FS. Hub is made of zinc-plated steel with passivation. Spring is black and steel.
Sliding hubs can be...
Sliding hubs can be...
Hub with friction - min. 1 360 Nm | FS series
Madler presents Sliding Hubs FS. Hub is made of zinc-plated steel with passivation. Spring is black and steel.
Sliding hubs can be supplied immediately as pre-drilled with standard bush length. The width of the part to be joined determines how much bush length is needed. Till prod. no. 612 006 00, for a part width between 5.3 to 6.0 mm, bush length of 4.2 mm is needed. And till prod. no. 612 010 00, the required bush length (mm) is 1.5 x G + C. Also available upon additional payment are other bush lengths and tailor-made bores or feather-key grooves.
Sliding hubs can be supplied immediately as pre-drilled with standard bush length. The width of the part to be joined determines how much bush length is needed. Till prod. no. 612 006 00, for a part width between 5.3 to 6.0 mm, bush length of 4.2 mm is needed. And till prod. no. 612 010 00, the required bush length (mm) is 1.5 x G + C. Also available upon additional payment are other bush lengths and tailor-made bores or feather-key grooves.