+7 (812) 645-08-06
Equipment for extrusion lines
select brand
Dosing unit - 50 - 500 bar, 0.5 - 250 kg/h | ecofoam®
The ecofoam® is a dosing unit that is constructed with a leak-free system that is used to meter a wide variety of blowing...
Dosing unit - 50 - 500 bar, 0.5 - 250 kg/h | ecofoam®
The ecofoam® is a dosing unit that is constructed with a leak-free system that is used to meter a wide variety of blowing...
Length cutting saw / plate / for extrusion lines
Using their over 40 years of experience, BREYER has developed a new INLINE side trim saw for use in sheet production. The machine makes the production process...
Length cutting saw / plate / for extrusion lines
Using their over 40 years of experience, BREYER has developed a new INLINE side trim saw for use in sheet production. The machine makes the production process comfortable, safe,dust free and less noisy. The edges of the sheets need to be trimmed in order to get the desired format when sawing PC, PMMA and other amorphous sheets. The company has supplied almost every line including sawing equipment. This new generation of side trim saws shows a definite improvement in cutting jobs. Compared to earlier solutions the INLINE side trim saws guarantee lower noise levels during the cutting process, have low noise level and cut cleanly.
Calendering line - 250 / 400 / 800 mm, max. 50 m/min
The electrode manufacturing process demands some of the production processes including the slurry mixing, coating, evaporation, drying, calendaring, and slitting. During the process of calendering, the increasing...
Calendering line - 250 / 400 / 800 mm, max. 50 m/min
The electrode manufacturing process demands some of the production processes including the slurry mixing, coating, evaporation, drying, calendaring, and slitting. During the process of calendering, the increasing of power density, the optimization of the electron transport and the enhancement of the contact between particles are necessary and must be achieved. BREYER has been focusing on the calendering process. The BREYER equipment for calendering includes the unwinding for the coated substrate, the calendering resp. compressing system as well as the winder for the processed electrodes. The experience in field of calendar processing allows the BREYER to enhance a quality calender system, permits extreme line pressures with a special gap adjustment system, to fulfill the standards in precision of the electrode production.
Thickness measuring instrument for blown film extrusion line - 10 - 500 µm | BTS series
In contrast to x-ray inspection machines, the capacitive thickness profile measurement machine, BTS 8104, is a safe and sound solution for your film production unit. It can be fitted behind the calibration cage of the bubble and...
Thickness measuring instrument for blown film extrusion line - 10 - 500 µm | BTS series
In contrast to x-ray inspection machines, the capacitive thickness profile measurement machine, BTS 8104, is a safe and sound solution for your film production unit. It can be fitted behind the calibration cage of the bubble and...